linux-toradex.git/include/linux/serial_core.h, branch v4.16-rc4

Merge tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2018-02-09T17:44:25+00:00

Pull more ACPI updates from Rafael Wysocki:
 "These are mostly fixes and cleanups, a few new quirks, a couple of
  updates related to the handling of ACPI tables and ACPICA copyrights
  refreshment.

  Specifics:

   - Update the ACPICA kernel code to upstream revision 20180105
     including:
       * Assorted fixes (Jung-uk Kim)
       * Support for X32 ABI compilation (Anuj Mittal)
       * Update of ACPICA copyrights to 2018 (Bob Moore)

   - Prepare for future modifications to avoid executing the _STA
     control method too early (Hans de Goede)

   - Make the processor performance control library code ignore _PPC
     notifications if they cannot be handled and fix up the C1 idle
     state definition when it is used as a fallback state (Chen Yu,
     Yazen Ghannam)

   - Make it possible to use the SPCR table on x86 and to replace the
     original IORT table with a new one from initrd (Prarit Bhargava,
     Shunyong Yang)

   - Add battery-related quirks for Asus UX360UA and UX410UAK and add
     quirks for table parsing on Dell XPS 9570 and Precision M5530 (Kai
     Heng Feng)

   - Address static checker warnings in the CPPC code (Gustavo Silva)

   - Avoid printing a raw pointer to the kernel log in the smart battery
     driver (Greg Kroah-Hartman)"

* tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: sbshc: remove raw pointer from printk() message
  ACPI: SPCR: Make SPCR available to x86
  ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit
  ACPI / tables: Add IORT to injectable table list
  ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530
  ACPICA: Update version to 20180105
  ACPICA: All acpica: Update copyrights to 2018
  ACPI / processor: Set default C1 idle state description
  ACPI / battery: Add quirk for Asus UX360UA and UX410UAK
  ACPI: processor_perflib: Do not send _PPC change notification if not ready
  ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
  ACPI / bus: Do not call _STA on battery devices with unmet dependencies
  PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status
  ACPI: export acpi_bus_get_status_handle()
  ACPICA: Add a missing pair of parentheses
  ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR()
  ACPICA: Avoid NULL pointer arithmetic
  ACPICA: Linux: add support for X32 ABI compilation
  ACPI / video: Use true for boolean value

ACPI: SPCR: Make SPCR available to x86

2018-02-07T10:39:58+00:00

SPCR is currently only enabled or ARM64 and x86 can use SPCR to setup
an early console.

General fixes include updating Documentation & Kconfig (for x86),
updating comments, and changing parse_spcr() to acpi_parse_spcr(),
and earlycon_init_is_deferred to earlycon_acpi_spcr_enable to be
more descriptive.

On x86, many systems have a valid SPCR table but the table version is
not 2 so the table version check must be a warning.

On ARM64 when the kernel parameter earlycon is used both the early console
and console are enabled.  On x86, only the earlycon should be enabled by
by default.  Modify acpi_parse_spcr() to allow options for initializing
the early console and console separately.

Signed-off-by: Prarit Bhargava 
Acked-by: Ingo Molnar 
Reviewed-by: Mark Salter 
Tested-by: Mark Salter 
Signed-off-by: Rafael J. Wysocki

serial: core: Make uart_parse_options take const char* argument

2018-01-09T15:46:26+00:00

The pointed string is never modified from within uart_parse_options, so
it should be marked as const in the function prototype.

Signed-off-by: Paul Cercueil 
Signed-off-by: Greg Kroah-Hartman

serial: Make retrieval of rs485 properties platform-agnostic

2017-11-28T15:04:57+00:00

Commit ef838a81dd4d ("serial: Add common rs485 device tree parsing
function") consolidated retrieval of rs485 OF properties in a common
helper function but did not #ifdef it to CONFIG_OF.  The function is
therefore included on ACPI platforms as well even though it's not used.

On the other hand ACPI platforms with rs485 do exist (e.g. Siemens
IOT2040) and they may leverage _DSD to store rs485 properties.  Likewise,
UART platform devices instantiated from an MFD should be able to specify
rs485 properties.  In fact, the tty subsystem maintainer had asked for
a "generic" function during review of commit ef838a81dd4d:
https://marc.info/?l=linux-serial&m=150143441725194&w=4

Thus, instead of constraining the helper to OF platforms, make it
platform-agnostic by converting it to device_property_*() functions
and renaming it accordingly.

In imx.c, move the invocation of uart_get_rs485_mode() from
serial_imx_probe_dt() to serial_imx_probe() so that it also gets called
for non-OF devices.

In omap-serial.c, move its invocation further up within
serial_omap_probe_rs485() so that the RTS polarity can be overridden
with the driver-specific "rs485-rts-active-high" property once we
introduce a generic "rs485-rts-active-low" property.

Cc: Jan Kiszka 
Cc: Richard Genoud 
Cc: Sascha Hauer 
Signed-off-by: Lukas Wunner 
Acked-by: Uwe Kleine-König 
Signed-off-by: Greg Kroah-Hartman

serial: Add common rs485 device tree parsing function

2017-09-18T16:36:25+00:00

Several drivers have the same device tree parsing code. Create
a common helper function for it.

This patch bases on work done by Sascha Hauer.

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Greg Kroah-Hartman

serial: core: remove unneeded irq_wake flag

2017-08-28T18:51:20+00:00

There is no need to duplicate a flag which IRQ core takes care of.

Replace custom flag by IRQ core API that retrieves its state.

Signed-off-by: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman

serial: core: move UPF_NO_TXEN_TEST to quirks and rename

2017-07-30T14:44:22+00:00

First 16 bits in the flags field are user-visible except
UPF_NO_TXEN_TEST. To keep it clean we introduce internal quirks and move
UPF_NO_TXEN_TEST to them. Rename the constant to UPQ_NO_TXEN_TEST to
distinguish with port flags. Users are converted accordingly.

The quirks field might be extended later to hold the additional ones.

Signed-off-by: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman

serial: 8250: Add flag so drivers can avoid THRE probe

2017-05-18T14:19:16+00:00

The probing of THRE irq behaviour assumes the other end will be reading
bytes out of the buffer in order to probe the port at driver init. In
some cases the other end cannot be relied upon to read these bytes, so
provide a flag for them to skip this step.

Bit 19 was chosen as the flags are a int and the top bits are taken.

Acked-by: Benjamin Herrenschmidt 
Signed-off-by: Joel Stanley 
Signed-off-by: Greg Kroah-Hartman

serial: core: constify struct uart_port {name} field

2017-04-08T16:51:57+00:00

Don't allow modifications of port name. It's serial core's business only.

Signed-off-by: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman

tty: serial_core: Add name field to uart_port struct

2017-03-31T14:56:10+00:00

Introduce a field to store name of uart_port that can be used to easily
identify UART port instances on a system that has more than one UART
instance. The name is of the form ttyXN(eg. ttyS0, ttyAMA0,..) where N
is number that particular UART instance.
This field will be useful when printing debug info for a particular port
or in register IRQs with unique IRQ name. Port name is populated during
uart_add_one_port().

Signed-off-by: Vignesh R 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman