linux-toradex.git/include/linux/skmsg.h, branch v6.4-rc1

bpf, sockmap: Fix missing BPF_F_INGRESS flag when using apply_bytes

2022-12-01T00:07:32+00:00

When redirecting, we use sk_msg_to_ingress() to get the BPF_F_INGRESS
flag from the msg->flags. If apply_bytes is used and it is larger than
the current data being processed, sk_psock_msg_verdict() will not be
called when sendmsg() is called again. At this time, the msg->flags is 0,
and we lost the BPF_F_INGRESS flag.

So we need to save the BPF_F_INGRESS flag in sk_psock and use it when
redirection.

Fixes: 8934ce2fd081 ("bpf: sockmap redirect ingress support")
Signed-off-by: Pengcheng Yang 
Signed-off-by: Daniel Borkmann 
Acked-by: Jakub Sitnicki 
Link: https://lore.kernel.org/bpf/1669718441-2654-3-git-send-email-yangpc@wangsu.com

bpf, sock_map: Move cancel_work_sync() out of sock lock

2022-11-03T12:51:06+00:00

Stanislav reported a lockdep warning, which is caused by the
cancel_work_sync() called inside sock_map_close(), as analyzed
below by Jakub:

psock->work.func = sk_psock_backlog()
  ACQUIRE psock->work_mutex
    sk_psock_handle_skb()
      skb_send_sock()
        __skb_send_sock()
          sendpage_unlocked()
            kernel_sendpage()
              sock->ops->sendpage = inet_sendpage()
                sk->sk_prot->sendpage = tcp_sendpage()
                  ACQUIRE sk->sk_lock
                    tcp_sendpage_locked()
                  RELEASE sk->sk_lock
  RELEASE psock->work_mutex

sock_map_close()
  ACQUIRE sk->sk_lock
  sk_psock_stop()
    sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED)
    cancel_work_sync()
      __cancel_work_timer()
        __flush_work()
          // wait for psock->work to finish
  RELEASE sk->sk_lock

We can move the cancel_work_sync() out of the sock lock protection,
but still before saved_close() was called.

Fixes: 799aa7f98d53 ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Reported-by: Stanislav Fomichev 
Signed-off-by: Cong Wang 
Signed-off-by: Daniel Borkmann 
Tested-by: Jakub Sitnicki 
Acked-by: John Fastabend 
Acked-by: Jakub Sitnicki 
Link: https://lore.kernel.org/bpf/20221102043417.279409-1-xiyou.wangcong@gmail.com

net: fix refcount bug in sk_psock_get (2)

2022-08-11T04:47:58+00:00

Syzkaller reports refcount bug as follows:
------------[ cut here ]------------
refcount_t: saturated; leaking memory.
WARNING: CPU: 1 PID: 3605 at lib/refcount.c:19 refcount_warn_saturate+0xf4/0x1e0 lib/refcount.c:19
Modules linked in:
CPU: 1 PID: 3605 Comm: syz-executor208 Not tainted 5.18.0-syzkaller-03023-g7e062cda7d90 #0
 
 __refcount_add_not_zero include/linux/refcount.h:163 [inline]
 __refcount_inc_not_zero include/linux/refcount.h:227 [inline]
 refcount_inc_not_zero include/linux/refcount.h:245 [inline]
 sk_psock_get+0x3bc/0x410 include/linux/skmsg.h:439
 tls_data_ready+0x6d/0x1b0 net/tls/tls_sw.c:2091
 tcp_data_ready+0x106/0x520 net/ipv4/tcp_input.c:4983
 tcp_data_queue+0x25f2/0x4c90 net/ipv4/tcp_input.c:5057
 tcp_rcv_state_process+0x1774/0x4e80 net/ipv4/tcp_input.c:6659
 tcp_v4_do_rcv+0x339/0x980 net/ipv4/tcp_ipv4.c:1682
 sk_backlog_rcv include/net/sock.h:1061 [inline]
 __release_sock+0x134/0x3b0 net/core/sock.c:2849
 release_sock+0x54/0x1b0 net/core/sock.c:3404
 inet_shutdown+0x1e0/0x430 net/ipv4/af_inet.c:909
 __sys_shutdown_sock net/socket.c:2331 [inline]
 __sys_shutdown_sock net/socket.c:2325 [inline]
 __sys_shutdown+0xf1/0x1b0 net/socket.c:2343
 __do_sys_shutdown net/socket.c:2351 [inline]
 __se_sys_shutdown net/socket.c:2349 [inline]
 __x64_sys_shutdown+0x50/0x70 net/socket.c:2349
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
 

During SMC fallback process in connect syscall, kernel will
replaces TCP with SMC. In order to forward wakeup
smc socket waitqueue after fallback, kernel will sets
clcsk->sk_user_data to origin smc socket in
smc_fback_replace_callbacks().

Later, in shutdown syscall, kernel will calls
sk_psock_get(), which treats the clcsk->sk_user_data
as psock type, triggering the refcnt warning.

So, the root cause is that smc and psock, both will use
sk_user_data field. So they will mismatch this field
easily.

This patch solves it by using another bit(defined as
SK_USER_DATA_PSOCK) in PTRMASK, to mark whether
sk_user_data points to a psock object or not.
This patch depends on a PTRMASK introduced in commit f1ff5ce2cd5e
("net, sk_msg: Clear sk_user_data pointer on clone if tagged").

For there will possibly be more flags in the sk_user_data field,
this patch also refactor sk_user_data flags code to be more generic
to improve its maintainability.

Reported-and-tested-by: syzbot+5f26f85569bd179c18ce@syzkaller.appspotmail.com
Suggested-by: Jakub Kicinski 
Acked-by: Wen Gu 
Signed-off-by: Hawkins Jiawei 
Reviewed-by: Jakub Sitnicki 
Signed-off-by: Jakub Kicinski

bpf, sockmap: Fix sk->sk_forward_alloc warn_on in sk_stream_kill_queues

2022-06-02T23:26:58+00:00

During TCP sockmap redirect pressure test, the following warning is triggered:

WARNING: CPU: 3 PID: 2145 at net/core/stream.c:205 sk_stream_kill_queues+0xbc/0xd0
CPU: 3 PID: 2145 Comm: iperf Kdump: loaded Tainted: G        W         5.10.0+ #9
Call Trace:
 inet_csk_destroy_sock+0x55/0x110
 inet_csk_listen_stop+0xbb/0x380
 tcp_close+0x41b/0x480
 inet_release+0x42/0x80
 __sock_release+0x3d/0xa0
 sock_close+0x11/0x20
 __fput+0x9d/0x240
 task_work_run+0x62/0x90
 exit_to_user_mode_prepare+0x110/0x120
 syscall_exit_to_user_mode+0x27/0x190
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The reason we observed is that:

When the listener is closing, a connection may have completed the three-way
handshake but not accepted, and the client has sent some packets. The child
sks in accept queue release by inet_child_forget()->inet_csk_destroy_sock(),
but psocks of child sks have not released.

To fix, add sock_map_destroy to release psocks.

Signed-off-by: Wang Yufen 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Andrii Nakryiko 
Acked-by: Jakub Sitnicki 
Acked-by: John Fastabend 
Link: https://lore.kernel.org/bpf/20220524075311.649153-1-wangyufen@huawei.com

bpf, sockmap: Fix memleak in sk_psock_queue_msg

2022-03-15T15:43:31+00:00

If tcp_bpf_sendmsg is running during a tear down operation we may enqueue
data on the ingress msg queue while tear down is trying to free it.

 sk1 (redirect sk2)                         sk2
 -------------------                      ---------------
tcp_bpf_sendmsg()
 tcp_bpf_send_verdict()
  tcp_bpf_sendmsg_redir()
   bpf_tcp_ingress()
                                          sock_map_close()
                                           lock_sock()
    lock_sock() ... blocking
                                           sk_psock_stop
                                            sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED);
                                           release_sock(sk);
    lock_sock()
    sk_mem_charge()
    get_page()
    sk_psock_queue_msg()
     sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED);
      drop_sk_msg()
    release_sock()

While drop_sk_msg(), the msg has charged memory form sk by sk_mem_charge
and has sg pages need to put. To fix we use sk_msg_free() and then kfee()
msg.

This issue can cause the following info:
WARNING: CPU: 0 PID: 9202 at net/core/stream.c:205 sk_stream_kill_queues+0xc8/0xe0
Call Trace:
 
 inet_csk_destroy_sock+0x55/0x110
 tcp_rcv_state_process+0xe5f/0xe90
 ? sk_filter_trim_cap+0x10d/0x230
 ? tcp_v4_do_rcv+0x161/0x250
 tcp_v4_do_rcv+0x161/0x250
 tcp_v4_rcv+0xc3a/0xce0
 ip_protocol_deliver_rcu+0x3d/0x230
 ip_local_deliver_finish+0x54/0x60
 ip_local_deliver+0xfd/0x110
 ? ip_protocol_deliver_rcu+0x230/0x230
 ip_rcv+0xd6/0x100
 ? ip_local_deliver+0x110/0x110
 __netif_receive_skb_one_core+0x85/0xa0
 process_backlog+0xa4/0x160
 __napi_poll+0x29/0x1b0
 net_rx_action+0x287/0x300
 __do_softirq+0xff/0x2fc
 do_softirq+0x79/0x90
 

WARNING: CPU: 0 PID: 531 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x175/0x1b0
Call Trace:
 
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 ? process_one_work+0x3c0/0x3c0
 worker_thread+0x30/0x350
 ? process_one_work+0x3c0/0x3c0
 kthread+0xe6/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x22/0x30
 

Fixes: 9635720b7c88 ("bpf, sockmap: Fix memleak on ingress msg enqueue")
Signed-off-by: Wang Yufen 
Signed-off-by: Daniel Borkmann 
Acked-by: John Fastabend 
Link: https://lore.kernel.org/bpf/20220304081145.2037182-2-wangyufen@huawei.com

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2022-02-10T02:40:56+00:00

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-02-09

We've added 126 non-merge commits during the last 16 day(s) which contain
a total of 201 files changed, 4049 insertions(+), 2215 deletions(-).

The main changes are:

1) Add custom BPF allocator for JITs that pack multiple programs into a huge
   page to reduce iTLB pressure, from Song Liu.

2) Add __user tagging support in vmlinux BTF and utilize it from BPF
   verifier when generating loads, from Yonghong Song.

3) Add per-socket fast path check guarding from cgroup/BPF overhead when
   used by only some sockets, from Pavel Begunkov.

4) Continued libbpf deprecation work of APIs/features and removal of their
   usage from samples, selftests, libbpf & bpftool, from Andrii Nakryiko
   and various others.

5) Improve BPF instruction set documentation by adding byte swap
   instructions and cleaning up load/store section, from Christoph Hellwig.

6) Switch BPF preload infra to light skeleton and remove libbpf dependency
   from it, from Alexei Starovoitov.

7) Fix architecture-agnostic macros in libbpf for accessing syscall
   arguments from BPF progs for non-x86 architectures,
   from Ilya Leoshkevich.

8) Rework port members in struct bpf_sk_lookup and struct bpf_sock to be
   of 16-bit field with anonymous zero padding, from Jakub Sitnicki.

9) Add new bpf_copy_from_user_task() helper to read memory from a different
   task than current. Add ability to create sleepable BPF iterator progs,
   from Kenny Yu.

10) Implement XSK batching for ice's zero-copy driver used by AF_XDP and
    utilize TX batching API from XSK buffer pool, from Maciej Fijalkowski.

11) Generate temporary netns names for BPF selftests to avoid naming
    collisions, from Hangbin Liu.

12) Implement bpf_core_types_are_compat() with limited recursion for
    in-kernel usage, from Matteo Croce.

13) Simplify pahole version detection and finally enable CONFIG_DEBUG_INFO_DWARF5
    to be selected with CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor.

14) Misc minor fixes to libbpf and selftests from various folks.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (126 commits)
  selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup
  bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide
  libbpf: Fix compilation warning due to mismatched printf format
  selftests/bpf: Test BPF_KPROBE_SYSCALL macro
  libbpf: Add BPF_KPROBE_SYSCALL macro
  libbpf: Fix accessing the first syscall argument on s390
  libbpf: Fix accessing the first syscall argument on arm64
  libbpf: Allow overriding PT_REGS_PARM1{_CORE}_SYSCALL
  selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390
  libbpf: Fix accessing syscall arguments on riscv
  libbpf: Fix riscv register names
  libbpf: Fix accessing syscall arguments on powerpc
  selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macro
  libbpf: Add PT_REGS_SYSCALL_REGS macro
  selftests/bpf: Fix an endianness issue in bpf_syscall_macro test
  bpf: Fix bpf_prog_pack build HPAGE_PMD_SIZE
  bpf: Fix leftover header->pages in sparc and powerpc code.
  libbpf: Fix signedness bug in btf_dump_array_data()
  selftests/bpf: Do not export subtest as standalone test
  bpf, x86_64: Fail gracefully on bpf_jit_binary_pack_finalize failures
  ...
====================

Link: https://lore.kernel.org/r/20220209210050.8425-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski

skmsg: convert struct sk_msg_sg::copy to a bitmap

2022-02-05T15:34:47+00:00

We have plans for increasing MAX_SKB_FRAGS, but sk_msg_sg::copy
is currently an unsigned long, limiting MAX_SKB_FRAGS to 30 on 32bit arches.

Convert it to a bitmap, as Jakub suggested.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

bpf: remove unused static inlines

2022-01-27T05:17:53+00:00

Remove two dead stubs, sk_msg_clear_meta() was never
used, use of xskq_cons_is_full() got replaced by
xsk_tx_writeable() in v5.10.

Signed-off-by: Jakub Kicinski 
Link: https://lore.kernel.org/r/20220126185412.2776254-1-kuba@kernel.org
Signed-off-by: Alexei Starovoitov

net: use sk_is_tcp() in more places

2021-11-16T13:10:34+00:00

Move sk_is_tcp() to include/net/sock.h and use it where we can.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

bpf, sockmap: Use stricter sk state checks in sk_lookup_assign

2021-11-08T23:56:35+00:00

In order to fix an issue with sockets in TCP sockmap redirect cases we plan
to allow CLOSE state sockets to exist in the sockmap. However, the check in
bpf_sk_lookup_assign() currently only invalidates sockets in the
TCP_ESTABLISHED case relying on the checks on sockmap insert to ensure we
never SOCK_CLOSE state sockets in the map.

To prepare for this change we flip the logic in bpf_sk_lookup_assign() to
explicitly test for the accepted cases. Namely, a tcp socket in TCP_LISTEN
or a udp socket in TCP_CLOSE state. This also makes the code more resilent
to future changes.

Suggested-by: Jakub Sitnicki 
Signed-off-by: John Fastabend 
Signed-off-by: Daniel Borkmann 
Reviewed-by: Jakub Sitnicki 
Link: https://lore.kernel.org/bpf/20211103204736.248403-2-john.fastabend@gmail.com