linux-toradex.git/include/linux/soc/qcom, branch v6.0-rc7 Linux kernel for Apalis and Colibri modules soc: qcom: llcc: Add sc8180x and sc8280xp configurations 2022-05-04T16:39:40+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2022-05-02T21:54:06+00:00 ec69dfbdc426f22a9557e5c5408d7902fe0e0144 Add LLCC configuration data for the SC8180X and SC8280XP platforms, based on the downstream tables. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Link: https://lore.kernel.org/r/20220502215406.612967-3-bjorn.andersson@linaro.org 
Add LLCC configuration data for the SC8180X and SC8280XP platforms,
based on the downstream tables.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Link: https://lore.kernel.org/r/20220502215406.612967-3-bjorn.andersson@linaro.org
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2022-03-30T17:11:04+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-03-30T17:11:04+00:00 95124339875c8d9c092eb2fa3993e4751e1be48d Pull clk updates from Stephen Boyd: "There's one large change in the core clk framework here. We change how clk_set_rate_range() works so that the frequency is re-evaulated each time the rate is changed. Previously we wouldn't let clk providers see a rate that was different if it was still within the range, which could be bad for power if the clk could run slower when a range expands. Now the clk provider can decide to do something differently when the constraints change. This broke Nvidia's clk driver so we had to wait for the fix for that to bake a little more in -next. The rate range patch series also introduced a kunit suite for the clk framework that we're going to extend in the next release. It already made it easy to find corner cases in the rate range patches so I'm excited to see it cover more clk code and increase our confidence in core framework patches in the future. I also added a kunit test for the basic clk gate code and that work will continue to cover more basic clk types: muxes, dividers, etc. Beyond the core code we have the usual set of clk driver updates and additions. Qualcomm again dominates the diffstat here with lots more SoCs being supported and i.MX follows afer that with a similar number of SoCs gaining clk drivers. Beyond those large additions there's drivers being modernized to use clk_parent_data so we can move away from global string names for all the clks in an SoC. Finally there's lots of little fixes all over the clk drivers for typos, warnings, and missing clks that aren't critical and get batched up waiting for the next merge window to open. Nothing super big stands out in the driver pile. Full details are below. Core: - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range New Drivers: - i.MXRT1050 clock driver and bindings - i.MX8DXL clock driver and bindings - i.MX93 clock driver and bindings - NCO blocks on Apple SoCs - Audio clks on StarFive JH7100 RISC-V SoC - Add support for the new Renesas RZ/V2L SoC - Qualcomm SDX65 A7 PLL - Qualcomm SM6350 GPU clks - Qualcomm SM6125, SM6350, QCS2290 display clks - Qualcomm MSM8226 multimedia clks Updates: - Kunit tests for clk-gate implementation - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments - Mark mux table as const in clk-mux - Make the all_lists array const - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on Renesas R-Car S4-8 - Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates) - Use of_device_get_match_data() instead of open-coding on Rockchip rk3568 - Reintroduce the expected fractional-divider behaviour that disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS - Remove SYS PLL 1/2 clock gates for i.MX8M* - Remove AUDIO MCLK ROOT from i.MX7D - Add fracn gppll clock type used by i.MX93 - Add new composite clock for i.MX93 - Add missing media mipi phy ref clock for i.MX8MP - Fix off by one in imx_lpcg_parse_clks_from_dt() - Rework for the imx pll14xx - sama7g5: One low priority fix for GCLK of PDMC - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8 - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3 - Add CAN-FD clocks on Renesas R-Car V3U - Qualcomm SC8280XP RPMCC - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML - Convert various Qualcomm drivers to use clk_parent_data - Remove test clocks from various Qualcomm drivers - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs - Better pixel clk frequency support on Qualcomm RCG2 clks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits) clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate dt-bindings: clock: drop useless consumer example dt-bindings: clock: renesas: Make example 'clocks' parsable clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() clk: visconti: prevent array overflow in visconti_clk_register_gates() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments ... 
Pull clk updates from Stephen Boyd:
 "There's one large change in the core clk framework here. We change how
  clk_set_rate_range() works so that the frequency is re-evaulated each
  time the rate is changed. Previously we wouldn't let clk providers see
  a rate that was different if it was still within the range, which
  could be bad for power if the clk could run slower when a range
  expands. Now the clk provider can decide to do something differently
  when the constraints change. This broke Nvidia's clk driver so we had
  to wait for the fix for that to bake a little more in -next.

  The rate range patch series also introduced a kunit suite for the clk
  framework that we're going to extend in the next release. It already
  made it easy to find corner cases in the rate range patches so I'm
  excited to see it cover more clk code and increase our confidence in
  core framework patches in the future. I also added a kunit test for
  the basic clk gate code and that work will continue to cover more
  basic clk types: muxes, dividers, etc.

  Beyond the core code we have the usual set of clk driver updates and
  additions. Qualcomm again dominates the diffstat here with lots more
  SoCs being supported and i.MX follows afer that with a similar number
  of SoCs gaining clk drivers. Beyond those large additions there's
  drivers being modernized to use clk_parent_data so we can move away
  from global string names for all the clks in an SoC. Finally there's
  lots of little fixes all over the clk drivers for typos, warnings, and
  missing clks that aren't critical and get batched up waiting for the
  next merge window to open. Nothing super big stands out in the driver
  pile. Full details are below.

  Core:
   - Make clk_set_rate_range() re-evaluate the limits each time
   - Introduce various clk_set_rate_range() tests
   - Add clk_drop_range() to drop a previously set range

  New Drivers:
   - i.MXRT1050 clock driver and bindings
   - i.MX8DXL clock driver and bindings
   - i.MX93 clock driver and bindings
   - NCO blocks on Apple SoCs
   - Audio clks on StarFive JH7100 RISC-V SoC
   - Add support for the new Renesas RZ/V2L SoC
   - Qualcomm SDX65 A7 PLL
   - Qualcomm SM6350 GPU clks
   - Qualcomm SM6125, SM6350, QCS2290 display clks
   - Qualcomm MSM8226 multimedia clks

  Updates:
   - Kunit tests for clk-gate implementation
   - Terminate arrays with sentinels and make that clearer
   - Cleanup SPDX tags
   - Fix typos in comments
   - Mark mux table as const in clk-mux
   - Make the all_lists array const
   - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding
     and add support for dynamic mode
   - Clock configuration on Microchip PolarFire SoCs
   - Free allocations on probe error in Mediatek clk driver
   - Modernize Mediatek clk driver by consolidating code
   - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks
     on Renesas R-Car S4-8
   - Improve the clocks for the Rockchip rk3568 display outputs
     (parenting, pll-rates)
   - Use of_device_get_match_data() instead of open-coding on Rockchip
     rk3568
   - Reintroduce the expected fractional-divider behaviour that
     disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
   - Remove SYS PLL 1/2 clock gates for i.MX8M*
   - Remove AUDIO MCLK ROOT from i.MX7D
   - Add fracn gppll clock type used by i.MX93
   - Add new composite clock for i.MX93
   - Add missing media mipi phy ref clock for i.MX8MP
   - Fix off by one in imx_lpcg_parse_clks_from_dt()
   - Rework for the imx pll14xx
   - sama7g5: One low priority fix for GCLK of PDMC
   - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
   - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
   - Add CAN-FD clocks on Renesas R-Car V3U
   - Qualcomm SC8280XP RPMCC
   - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs
   - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to
     YAML
   - Convert various Qualcomm drivers to use clk_parent_data
   - Remove test clocks from various Qualcomm drivers
   - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS
   - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs
   - Better pixel clk frequency support on Qualcomm RCG2 clks"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits)
  clk: zynq: Update the parameters to zynq_clk_register_periph_clk
  clk: zynq: trivial warning fix
  clk: Drop the rate range on clk_put()
  clk: test: Test clk_set_rate_range on orphan mux
  clk: Initialize orphan req_rate
  dt-bindings: clock: drop useless consumer example
  dt-bindings: clock: renesas: Make example 'clocks' parsable
  clk: qcom: gcc-msm8994: Fix gpll4 width
  dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml
  clk: rs9: Add Renesas 9-series PCIe clock generator driver
  clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()
  clk: visconti: prevent array overflow in visconti_clk_register_gates()
  dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator
  clk: sifive: Move all stuff into SoCs header files from C files
  clk: sifive: Add SoCs prefix in each SoCs-dependent data
  riscv: dts: Change the macro name of prci in each device node
  dt-bindings: change the macro name of prci in header files and example
  clk: sifive: duplicate the macro definitions for the time being
  clk: qcom: sm6125-gcc: fix typos in comments
  clk: ti: clkctrl: fix typos in comments
  ...
clk: qcom: smd: Add missing RPM clocks for msm8992/4 2022-03-09T14:53:14+00:00 Konrad Dybcio konrad.dybcio@somainline.org 2022-02-26T21:41:25+00:00 f804360bb3a50decbed6e2761247964dca72c080 XO and MSS_CFG were omitted when first adding the clocks for these SoCs. Add them, and while at it, move the XO clock to the top of the definition list, as ideally everyone should start using it sooner or later.. Fixes: b4297844995f ("clk: qcom: smd: Add support for MSM8992/4 rpm clocks") Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226214126.21209-2-konrad.dybcio@somainline.org 
XO and MSS_CFG were omitted when first adding the clocks for these SoCs.
Add them, and while at it, move the XO clock to the top of the definition
list, as ideally everyone should start using it sooner or later..

Fixes: b4297844995f ("clk: qcom: smd: Add support for MSM8992/4 rpm clocks")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226214126.21209-2-konrad.dybcio@somainline.org
soc: qcom: llcc: Add configuration data for SM8450 SoC 2022-02-11T00:29:33+00:00 Sai Prakash Ranjan quic_saipraka@quicinc.com 2022-01-28T07:47:13+00:00 a6e9d7ef252c44a4f33b4403cd367430697dd9be Add LLCC configuration data for SM8450 SoC. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/fec944cb8f2a4a70785903c6bfec629c6f31b6a4.1643355594.git.quic_saipraka@quicinc.com 
Add LLCC configuration data for SM8450 SoC.

Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/fec944cb8f2a4a70785903c6bfec629c6f31b6a4.1643355594.git.quic_saipraka@quicinc.com
soc: qcom: llcc: Update the logic for version info extraction 2022-02-11T00:29:33+00:00 Sai Prakash Ranjan quic_saipraka@quicinc.com 2022-01-28T07:47:09+00:00 8008e7902f28eb9e5459b21d375b3e5b4090efff LLCC HW version info is made up of major, branch, minor and echo version bits each of which are 8bits. Several features in newer LLCC HW are based on the full version rather than just major or minor versions such as write-subcache enable which is applicable for versions v2.0.0.0 and later, also upcoming write-subcache cacheable for SM8450 SoC which is only present in versions v2.1.0.0 and later, so it makes it easier and cleaner to just directly compare with the full version than adding additional major/branch/ minor/echo version checks. So remove the earlier major version check and add full version check for those features. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/a82d7c32348c51fcc2b63e220d91b318bf706c83.1643355594.git.quic_saipraka@quicinc.com 
LLCC HW version info is made up of major, branch, minor and echo
version bits each of which are 8bits. Several features in newer
LLCC HW are based on the full version rather than just major or
minor versions such as write-subcache enable which is applicable
for versions v2.0.0.0 and later, also upcoming write-subcache
cacheable for SM8450 SoC which is only present in versions v2.1.0.0
and later, so it makes it easier and cleaner to just directly
compare with the full version than adding additional major/branch/
minor/echo version checks. So remove the earlier major version check
and add full version check for those features.

Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/a82d7c32348c51fcc2b63e220d91b318bf706c83.1643355594.git.quic_saipraka@quicinc.com
soc: qcom: mdt_loader: Extract PAS operations 2022-02-04T03:54:48+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2022-01-28T02:55:08+00:00 f4e526ff7e38e27bb87d53131d227a6fd6f73ab5 Rather than passing a boolean to indicate if the PAS operations should be performed from within __mdt_load(), extract them to their own helper function. This will allow clients to invoke this directly, with some qcom_scm_pas_metadata context that they later needs to release, without further having to complicate the prototype of qcom_mdt_load(). Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220128025513.97188-9-bjorn.andersson@linaro.org 
Rather than passing a boolean to indicate if the PAS operations should
be performed from within __mdt_load(), extract them to their own helper
function.

This will allow clients to invoke this directly, with some
qcom_scm_pas_metadata context that they later needs to release, without
further having to complicate the prototype of qcom_mdt_load().

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-9-bjorn.andersson@linaro.org
soc: qcom: mdt_loader: Allow hash segment to be split out 2022-02-03T21:32:30+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2022-01-28T02:55:03+00:00 8bd42e2341a7857010001f08ee1729ced3b0e394 It's been observed that some firmware found in a Qualcomm SM8450 device has the hash table in a separate .bNN file. Use the newly extracted helper function to load this segment from the separate file, if it's determined that the hashes are not part of the already loaded firmware. In order to do this, the function needs access to the firmware basename and to provide more useful error messages a struct device to associate the errors with. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220128025513.97188-4-bjorn.andersson@linaro.org 
It's been observed that some firmware found in a Qualcomm SM8450 device
has the hash table in a separate .bNN file. Use the newly extracted
helper function to load this segment from the separate file, if it's
determined that the hashes are not part of the already loaded firmware.

In order to do this, the function needs access to the firmware basename
and to provide more useful error messages a struct device to associate
the errors with.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-4-bjorn.andersson@linaro.org
soc: qcom: llcc: Add configuration data for SM8350 2021-12-21T01:10:09+00:00 Konrad Dybcio konrad.dybcio@somainline.org 2021-11-21T00:20:46+00:00 6fc61c39ee1adb5f4115d288c876772fcd8b6979 Add LLCC configuration data for SM8350 SoC. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211121002050.36977-2-konrad.dybcio@somainline.org 
Add LLCC configuration data for SM8350 SoC.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211121002050.36977-2-konrad.dybcio@somainline.org
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2021-11-04T04:18:44+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-11-04T04:18:44+00:00 7ddb58cb0ecae8e8b6181d736a87667cc9ab8389 Pull clk updates from Stephen Boyd: "The usual collection of clk driver updates and new driver additions. In terms of lines it's mainly Qualcomm and Mediatek code, supporting various SoCs and their multitude of clk controllers. New Drivers: - GCC and RPMcc support for Qualcomm QCM2290 SoCs - GCC support for Qualcomm MSM8994/MSM8992 SoCs - LPASSCC and CAMCC support for Qualcomm SC7280 SoCs - Support for Mediatek MT8195 SoCs - Initial clock driver for the Exynos850 SoC - Add i.MX8ULP clock driver and related bindings Updates: - Clock power management for new SAMA7G5 SoC - Updates to the master clock driver and sam9x60-pll to be able to use cpufreq-dt driver and avoid overclocking of CPU and MCK0 domains while changing the frequency via DVFS - Use ARRAY_SIZE in qcom clk drivers - Remove some impractical fallback parent names in qcom clk drivers - Make Mediatek clk drivers tristate - Refactoring of the CPU clock code and conversion of Samsung Exynos5433 CPU clock driver to the platform driver - A few conversions to devm_platform_ioremap_resource() - Updates of the Samsung Kconfig help text - Update video path realted clocks for Amlogic meson8 - Add SPI Multi I/O Bus and SDHI clocks and resets on Renesas RZ/G2L - Add SPI Multi I/O Bus (RPC) clocks on Renesas R-Car V3U - Add MediaLB clocks on Renesas R-Car H3, M3-W/W+, and M3-N - Remove unused helpers from i.MX specific clock header - Rework all i.MX clk based helpers to use clk_hw based ones - Rework i.MX gate/mux/divider wrappers - Rework imx_clk_hw_composite and imx_clk_hw_pll14xx wrappers - Update i.MX pllv4 and composite clocks to support i.MX8ULP - Disable i.MX7ULP composite clock during initialization - Add CLK_SET_RATE_NO_REPARENT flag to the i.MX7ULP composite - Disable the i.MX pfd when set pfdv2 clock rate - Add support for i.MX8ULP in pfdv2 - Add the pcc reset controller support on i.MX8ULP - Fix the build break when clk-imx8ulp is built as module - Move csi_sel mux to correct base register in i.MX6UL clock drivr - Fix csi clk gate register in i.MX6UL clock driver - Fix build bug making CLK_IMX8ULP select MXC_CLK - Add TPU (PWM), and Z (Cortex-A76) clocks on Renesas R-Car V3U - Add Ethernet clocks on Renesas RZ/G2L - Move Rockchip to use module_platform_probe - Enable usage of Coresight related clocks on Rockchip rk3399" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (170 commits) clk: use clk_core_get_rate_recalc() in clk_rate_get() clk: at91: sama7g5: set low limit for mck0 at 32KHz clk: at91: sama7g5: remove prescaler part of master clock clk: at91: clk-master: add notifier for divider clk: at91: clk-sam9x60-pll: add notifier for div part of PLL clk: at91: clk-master: fix prescaler logic clk: at91: clk-master: mask mckr against layout->mask clk: at91: clk-master: check if div or pres is zero clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL clk: at91: pmc: add sama7g5 to the list of available pmcs clk: at91: clk-master: improve readability by using local variables clk: at91: clk-master: add register definition for sama7g5's master clock clk: at91: sama7g5: add securam's peripheral clock clk: at91: pmc: execute suspend/resume only for backup mode clk: at91: re-factor clocks suspend/resume clk: ux500: Add driver for the reset portions of PRCC dt-bindings: clock: u8500: Rewrite in YAML and extend clk: composite: Use rate_ops.determine_rate when also a mux is available clk: samsung: describe drivers in Kconfig clk: samsung: exynos5433: update apollo and atlas clock probing ... 
Pull clk updates from Stephen Boyd:
 "The usual collection of clk driver updates and new driver additions.
  In terms of lines it's mainly Qualcomm and Mediatek code, supporting
  various SoCs and their multitude of clk controllers.

  New Drivers:
   - GCC and RPMcc support for Qualcomm QCM2290 SoCs
   - GCC support for Qualcomm MSM8994/MSM8992 SoCs
   - LPASSCC and CAMCC support for Qualcomm SC7280 SoCs
   - Support for Mediatek MT8195 SoCs
   - Initial clock driver for the Exynos850 SoC
   - Add i.MX8ULP clock driver and related bindings

  Updates:
   - Clock power management for new SAMA7G5 SoC
   - Updates to the master clock driver and sam9x60-pll to be able to
     use cpufreq-dt driver and avoid overclocking of CPU and MCK0
     domains while changing the frequency via DVFS
   - Use ARRAY_SIZE in qcom clk drivers
   - Remove some impractical fallback parent names in qcom clk drivers
   - Make Mediatek clk drivers tristate
   - Refactoring of the CPU clock code and conversion of Samsung
     Exynos5433 CPU clock driver to the platform driver
   - A few conversions to devm_platform_ioremap_resource()
   - Updates of the Samsung Kconfig help text
   - Update video path realted clocks for Amlogic meson8
   - Add SPI Multi I/O Bus and SDHI clocks and resets on Renesas RZ/G2L
   - Add SPI Multi I/O Bus (RPC) clocks on Renesas R-Car V3U
   - Add MediaLB clocks on Renesas R-Car H3, M3-W/W+, and M3-N
   - Remove unused helpers from i.MX specific clock header
   - Rework all i.MX clk based helpers to use clk_hw based ones
   - Rework i.MX gate/mux/divider wrappers
   - Rework imx_clk_hw_composite and imx_clk_hw_pll14xx wrappers
   - Update i.MX pllv4 and composite clocks to support i.MX8ULP
   - Disable i.MX7ULP composite clock during initialization
   - Add CLK_SET_RATE_NO_REPARENT flag to the i.MX7ULP composite
   - Disable the i.MX pfd when set pfdv2 clock rate
   - Add support for i.MX8ULP in pfdv2
   - Add the pcc reset controller support on i.MX8ULP
   - Fix the build break when clk-imx8ulp is built as module
   - Move csi_sel mux to correct base register in i.MX6UL clock drivr
   - Fix csi clk gate register in i.MX6UL clock driver
   - Fix build bug making CLK_IMX8ULP select MXC_CLK
   - Add TPU (PWM), and Z (Cortex-A76) clocks on Renesas R-Car V3U
   - Add Ethernet clocks on Renesas RZ/G2L
   - Move Rockchip to use module_platform_probe
   - Enable usage of Coresight related clocks on Rockchip rk3399"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (170 commits)
  clk: use clk_core_get_rate_recalc() in clk_rate_get()
  clk: at91: sama7g5: set low limit for mck0 at 32KHz
  clk: at91: sama7g5: remove prescaler part of master clock
  clk: at91: clk-master: add notifier for divider
  clk: at91: clk-sam9x60-pll: add notifier for div part of PLL
  clk: at91: clk-master: fix prescaler logic
  clk: at91: clk-master: mask mckr against layout->mask
  clk: at91: clk-master: check if div or pres is zero
  clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL
  clk: at91: pmc: add sama7g5 to the list of available pmcs
  clk: at91: clk-master: improve readability by using local variables
  clk: at91: clk-master: add register definition for sama7g5's master clock
  clk: at91: sama7g5: add securam's peripheral clock
  clk: at91: pmc: execute suspend/resume only for backup mode
  clk: at91: re-factor clocks suspend/resume
  clk: ux500: Add driver for the reset portions of PRCC
  dt-bindings: clock: u8500: Rewrite in YAML and extend
  clk: composite: Use rate_ops.determine_rate when also a mux is available
  clk: samsung: describe drivers in Kconfig
  clk: samsung: exynos5433: update apollo and atlas clock probing
  ...
clk: qcom: smd-rpm: Add QCM2290 RPM clock support 2021-10-13T22:20:22+00:00 Shawn Guo shawn.guo@linaro.org 2021-09-17T03:04:34+00:00 78b727d0281507fabf954573420790b21e34aefe Add support for RPM-managed clocks on the QCM2290 platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210917030434.19859-4-shawn.guo@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
Add support for RPM-managed clocks on the QCM2290 platform.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210917030434.19859-4-shawn.guo@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>