Pull remoteproc updates from Bjorn Andersson: - Add Qualcomm QMI Thermal Mitigation Device support for PAS-managed remote processors, with cooling device bindings and configurations for Hamoa, Kodiak, Lemans, Talos, Monaco, and Shikra CDSP and modem subsystems as applicable. - Add per-power-domain proxy performance states for Hawi CDSP and update Hawi, Maili, and SDX75 PAS compatible bindings and the SDX75 device tree. Correct the Qualcomm ADSP startup timeout. - Fetch auto-boot firmware only once and synchronize boot work with device removal. Bound ELF section header accesses, improve trace diagnostics, and update coredump configuration documentation. - Set 48-bit DMA masks for TI K3 DSP and R5 remote processors, correct mailbox message types, and enable compile testing for more TI drivers. Fix i.MX address range boundary checks and DSP runtime PM ordering, and simplify mailbox notification handling. - Harden Xilinx mailbox setup and teardown and avoid sending notifications when the transmit queue is full. Propagate STM32 optional IRQ lookup errors and correct the MediaTek MT8188 SCP register binding. * tag 'rproc-v7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (33 commits) remoteproc: qcom_q6v5_pas: Add QMI TMD cooling support for Shikra remoteproc: virtio: Remove stray white space remoteproc: virtio: Replace kmemdup with kmemdup_array remoteproc: virtio: Add vdev_to_rsc() helper remoteproc: core: Fetch the auto-boot firmware only once remoteproc: xlnx: fix typecast warnings remoteproc: qcom_q6v5_pas: enable QMI TMD cooling support remoteproc: qcom: pas: add support for TMD thermal cooling devices soc: qcom: Add QMI TMD support for remote thermal mitigation dt-bindings: remoteproc: qcom,pas: add #cooling-cells property remoteproc: qcom_q6v5_pas: add per-PD proxy performance states for Hawi CDSP dt-bindings: remoteproc: qcom,sm8550-pas: make qcom,hawi-cdsp-pas standalone arm64: dts: qcom: sdx75: Use SM8650 MPSS as fallback compatible dt-bindings: remoteproc: qcom,sm8550-pas: Make SDX75 MPSS fallback to SM8650 dt-bindings: remoteproc: qcom,sm8550-pas: Add Hawi and Maili MPSS as SM8650 fallback dt-bindings: remoteproc: Fix MT8188 SCP regs remoteproc: Use %p for pointer formatting remoteproc: Add compile testing for additional TI drivers remoteproc: k3-dsp: Fix usage of omap_mbox_message and mbox_msg_t remoteproc: k3: Include what we need and only what we need ...
Pull tty / serial driver updates from Greg KH:
"Here is the "big" set of tty and serial driver updates for 7.4-rc1.
It's not really all that big, it's been kind of quiet in this area of
the tree this development cycle in relation to other parts of the
tree. But still, included in here are:
- 8250 port updates and fixes
- 8250 driver cleanups by Jiri
- deletion of the obsolete moxa driver (making this pull request
remove more lines than added!)
- different serial driver updates for dma and other reported issues
All of these have been in linux-next with no reported problems"
* tag 'tty-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (91 commits)
tty: hvc: dcc: Detect JTAG connection only on CPU core 0
serial: earlycon: Use isdigit() in earlycon_init()
serial: core: Use isdigit() in uart_parse_options()
dt-bindings: serial: snps-dw-apb-uart: Add Synaptics sl2610 uart
serial: amba-pl011: drive the bus during break in RS485 mode
serial: mcf: update author email address
serial: pmac_zilog: report received breaks
serial: pmac_zilog: push received data to the port that received it
serial: amba-pl011: keep transmitter enabled when disabling RS485
serial: ma35d1: Do not force-enable an unselected console
serial: amba-pl011: honour delay_rts_before_send for every write
Revert "serial: 8250_port: Drop duplicate NULL check"
serial: 8250: make port operations work on struct uart_8250_port
serial: 8250_omap: set priv->line before enabling the IRQ
serial: 8250_lpss: do not touch uninitialized line in ehl_serial_exit()
serial: 8250_exar: store the GPIO platform device in struct exar8250
serial: 8250_exar: remove useless void * casts
serial: 8250: drop err label from serial8250_register_8250_port()
serial: core: fix TIOCSSERIAL and TIOCSERCONFIG on uninitialised ports
serial: max310x: don't transmit while an RS485 reconfigure is pending
...
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Set supported_speeds in set_pcie_port_type() so sparc64 and
powerpc, which call it via of_create_pci_dev() instead of the usual
pci_setup_device(), correctly set the supported PCIe link speeds
(Stian Halseth)
- When pcie_set_mps() changes MPS, update the value in the saved
state so a subsequent restore doesn't restore an invalid value
(Niklas Cassel)
- Skip Target Speed quirk on clamped ports with no link (Maciej W.
Rozycki)
Driver binding:
- Assume control of portdrv-related features only when portdrv is
enabled, since we can't use them without portdrv (Kuppuswamy
Sathyanarayanan)
- Centralize feature ownership checking so code only needs to check
'host->native_X' and doesn't need to also check 'pcie_ports_native'
(Kuppuswamy Sathyanarayanan)
Error handling:
- Fix leaks when ACPI APEI/GHES error events overflow the kfifo or
mention a device that no longer exists (Priyank Rathod)
- Fix aer_process_err_devices() leak when a device is recorded as an
error source purely by being mentioned in the Root Port Error
Source and the device is inaccessible or logged only masked errors
(Priyank Rathod)
ASPM:
- Disable ASPM when drivers request that, even if the OS doesn't own
ASPM; otherwise drivers do it on their own, which is worse (Ilpo
Järvinen)
Power management:
- Align hibernate poweroff flow with suspend flow for bridges so they
can be powered down at hibernate as they are for suspend (Mario
Limonciello)
- Restore BARs after powering up during enumeration to fix a
regression on devices that don't preserve state in D3hot (Keng-Yu
Lin)
- Avoid D3 on PLX PEX 8532/8533/8548 downstream ports, where putting
them in D3hot takes down the whole switch (Imre Kaloz)
Power control:
- Add GPIO driver for Toshiba TC9563 embedded GPIO controller (Alex
Elder)
- Add DT documentation and pwrctrl driver support for TC9563 embedded
GPIO controller (Lorenzo Bianconi)
- Switch the tc9563 per-port reset to use the GPIO descriptor API
instead of direct regmap accesses (Lorenzo Bianconi)
- Only destroy devices created by pwrctrl core, so that when removing
a PCIe controller driver that uses pwrctrl, we don't remove devices
populated by another mechanism (Shawn Lin)
- Power off child devices on power-on failure (Lorenzo Bianconi)
PCIe native device hotplug:
- Make the 'pciehp_poll_mode' parameter read-only to prevent changes
via sysfs, which can cause errors when unbinding (Runyu Xiao)
Virtualization:
- Read SR-IOV VF Revision ID and Subsystem ID from VF instead of
assuming they're the same as VF 0; they may differ (Logan Odell)
- Add ACS quirk for Pericom PI7C9X2G304 switches (Hans de Goede)
Peer-to-peer DMA:
- Add Zhaoxin KX-6000, KH-40000, KX-6000G, KX-7000, and KH-50000 host
bridges to allowlist (LeoLiu-oc)
- Add Alibaba T-HEAD Yitian 710 host bridge to allowlist (Feng Tang)
- Add Intel Haswell client host bridge to allowlist (Scott Lee)
- Intel Xeon E3/E5/E7 0x6f00 host bridge to allowlist (kai zhang)
- Fix handling of errors in pci_p2pdma_add_resource() to avoid (a)
unmapping a BAR if registering another fails and (b) use after free
of p2p_pgmap (Leon Romanovsky)
- Wait for RCU readers before freeing state to avoid use-after-free
of pdev->p2pdma (Leon Romanovsky)
- Restrict pci_p2pmem_find_many() to providers backed by a pool (Leon
Romanovsky)
- Safely terminate ACS redirect lists to avoid out-of-bounds access
to the buffer (Leon Romanovsky)
- Silence 'Host bridge not in P2PDMA whitelist' warnings unless
caller, e.g., pci_p2pmem_find_many(), requests 'verbose' (Leon
Romanovsky)
Sysfs:
- Return -ENODEV or -EIO sysfs 'label' or 'acpi_index' attributes
when Device Name _DSM fails, not -1, which is interpreted as -EPERM
(Krzysztof Wilczyński)
- Return valid sysfs 'acpi_index' attribute even if the Device Name
_DSM returned an invalid 'label' (Krzysztof Wilczyński)
- Expose sysfs 'acpi_index' and 'label' based on whether the Device
Name _DSM returns valid data, not merely whether the _DSM is
implemented (Krzysztof Wilczyński)
- Avoid out-of-bounds reads of the label returned by the Device Name
_DSM, which is in UTF-16 characters, not bytes (Krzysztof
Wilczyński)
- Reject unaligned resource I/O port accesses, which can oops on
arm64 (Deepanshu Kartikey)
Endpoint framework:
- Pass the correct physical and virtual endpoint function numbers
when setting translation of inbound memory windows (Koichiro Den)
- Make embedded doorbell IRQ non-shared, since currently only the
first EPF can allocate doorbells (Koichiro Den)
- MSI doorbells currently target the first EPF attached to an EPC;
let other EPFs try the embedded doorbell instead of failing when
they can't use the MSI doorbell (Koichiro Den)
- Serialize scan of vNTB virtual PCI bus with other PCI topology
changes (Koichiro Den)
- Manage vNTB lifetimes to avoid leaking virtual devices and buses
and allow removal (Koichiro Den)
- Track vNTB link state from both sides so both see the same
effective link state (Koichiro Den)
- Configure vNTB MSI-X when supported to avoid IOMMU faults and
failure to deliver doorbell interrupts on RC (Koichiro Den)
APM X-Gene PCIe controller driver:
- Use devm for clocks so they're automatically disabled, unprepared,
and released if errors happen during probe (Yuho Choi)
ASPEED PCIe controller driver:
- Fix clk and PHY leaks in aspeed_pcie_port_init() error paths (Liu
Zhenlong)
Broadcom iProc PCIe controller driver:
- Expose devm_pci_alloc_host_bridge_release() so drivers can share a
devm release function even if they don't need the device tree
parsing done by devm_pci_alloc_host_bridge() (Bjorn Helgaas)
- Request only the memory window from BCMA Enumeration ROM and warn
if it doesn't match the one in DT, which fixes an iproc-bcma probe
failure (Semih Baskan)
Broadcom STB PCIe controller driver:
- Replace bool properties for each SoC configuration with a u32
bitvector and a BFLAG() helper (Jim Quinlan)
- Use a similar BQUIRK() helper to test various SoC quirks (Jim
Quinlan)
Cadence PCIe controller driver:
- Remove device links to PHY, which are redundant because the PHY
core itself adds them (Vladimir Oltean)
- Return error (not success) from cdns_plat_pcie_probe() if
pm_runtime_get_sync() or cdns_pcie_ep_setup() failed (Vladimir
Oltean)
- Correct the driver data pointer usage; previously .probe() stored
'struct cdns_plat_pcie *', but .shutdown() used the pointer as
'struct cdns_pcie *', resulting in accessing garbage (Linmao Li)
ESWIN PCIe controller driver:
- Publish the platform driver MODULE_DEVICE_TABLE so the driver can
be autoloaded when built as a module (Pengpeng Hou)
Freescale i.MX6 PCIe controller driver:
- Fix resource and pwrctrl device leaks .probe() (Zhijian Han)
- Improve i.MX95 Gen3 link stability by changing MPLLB_BANDWIDTH from
default 120 to 140 (Richard Zhu)
- Use dev_err_probe() in host init error path to silence
-EPROBE_DEFER messages (Alexander Stein)
- Avoid dereferencing NULL clock names when 'clocks' includes more
phandles than 'clock-names' has names (Rudi Heitbaum)
- Add suspend_poweroff flag so platforms like i.MX that power off RC
controllers during suspend can enter L2 so endpoints can get
PME_Turn_Off notifications before power loss (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Enable PROBE_PREFER_ASYNCHRONOUS to reduce probe time of the four
controllers on LX2160A (Vincent Jardin)
Intel VMD host bridge driver:
- Flush DMA writes before handling MSI on Meteor Lake: MSI may arrive
before write has completed, resulting in an nvme 30 second stall
before a QID timeout and possibly other similar problems (Rickey
Bartlett)
- Flush DMA writes before handling MSI on Arrow Lake (Vladimir
Nedoshivin)
Marvell Aardvark PCIe controller driver:
- Disable PHY on probe failures (Myeonghun Pak)
Marvell MVEBU PCIe controller driver:
- Refcount child OF nodes during .probe() to make a concurrent OF
overlay removal safe (Krzysztof Kozlowski)
MediaTek PCIe controller driver:
- Find INTx DT property by 'interrupt-controller' name instead of
assuming it's the first child node (Zhengping Zhang)
MediaTek PCIe Gen3 controller driver:
- Fix a 64-bit type truncation in mtk_pcie_set_trans_table() to avoid
issues with windows above or larger than 4GB (Sreeraj S Kurup)
NVIDIA Tegra264 PCIe controller driver:
- Fix the Link Capabilities offset so we read the correct register
(Bjorn Helgaas)
Qualcomm PCIe controller driver:
- Only collect reset GPIOs from PCI bridge DT nodes to avoid stealing
resets used by downstream devices like USB controllers (Christopher
Obbard)
- Block accesses to downstream devices on link down to reduce a storm
of Completion Timeout AER interrupts (Qiang Yu)
- Skip system suspend/resume for firmware-managed PCIe, where
firmware manages clocks, regulators, resets, etc (Mrinmay Sarkar)
- Honor IOMMU provider's #iommu-cells in qcom_pcie_config_sid_1_9_0()
(Manivannan Sadhasivam)
- Deinitialize endpoint on remove (Guangshuo Li)
- Treat Root Port error recovery as successful even if link doesn't
come up after reset because the device was hot-unplugged (Konrad
Dybcio)
- Skip unnecessary iMSI-RX initialization if DT 'msi-map' is present,
indicating an external MSI controller (Ayiluri Naga Rashmi)
Renesas R-Car PCIe controller driver:
- Limit Max_Read_Request_Size to 256 to avoid hardware erratum (Marek
Vasut)
- Support PERST# via reset subsystem as well as the existing GPIO
support to prepare for R-Car Gen5 SoCs (Marek Vasut)
- Add DT and driver support for the R-Car Gen 5 X5H (R8A78000) PCIe
Gen 4 core (Marek Vasut)
- Add Application/Local register reset DT description and driver
support for both host and endpoint mode (Marek Vasut)
- Add PM ops so controller works after suspend/resume (Marek Vasut)
Renesas RZ/G3S PCIe controller driver:
- Disable refclk on probe failure (Lad Prabhakar)
- Propagate platform_get_irq_byname() errors so probe deferral works
correctly (Lad Prabhakar)
- Tear down INTx handlers if subsequent initialization fails (Lad
Prabhakar)
- Add RZ/G3L (R9A08G046) DT and driver support (Biju Das)
Rockchip PCIe controller driver:
- Limit host and endpoint controllers to 2.5 GT/s since 5.0 GT/s is
unsafe per Rockchip (Geraldo Nascimento)
Synopsys DesignWare PCIe controller driver:
- Set DMA_BYPASS bit in outbound IATU CTRL2 register to avoid data
corruption if the iATU translates DMA engine transactions (Sumit
Kumar)
- Use FIELD_PREP() to remove need for *_SHIFT definitions (Hans
Zhang)
TI DRA7xx PCIe controller driver:
- Remove device links to PHY, which are redundant because the PHY
core itself adds them (Vladimir Oltean)
- Fix optional clock leak when .probe() fails by using
devm_clk_get_optional_enabled() (Felix Gu)
TI Keystone PCIe controller driver:
- Remove device links to PHY, which are redundant because the PHY
core itself adds them (Vladimir Oltean)
UltraRISC PCIe controller driver:
- Allow DWC drivers to skip outbound iATU setup if they don't need
translation between CPU and PCI addresses (Xincheng Zhang)
- Skip MEM outbound iATU setup on DP1000 (Xincheng Zhang)
Xilinx Versal CPM PCIe controller driver:
- Add DT and driver support for optional PERST# for use in warm reset
scenarios (Sai Krishna Musham)
Xilinx XDMA PCIe controller driver:
- Fix device node reference leak in xilinx_pl_dma_pcie_init_irq_domain()
(Wentao Liang)"
* tag 'pci-v7.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (139 commits)
PCI/pwrctrl: Power off child devices on power-on failure
PCI/pwrctrl: Only destroy devices created by pwrctrl core
PCI/pwrctrl: generic: Fix leaking array from of_regulator_bulk_get_all()
PCI/pwrctrl: tc9563: Switch per-port reset to GPIO descriptor API
PCI/pwrctrl: tc9563: Add GPIO auxiliary device support
dt-bindings: PCI: toshiba,tc9563: Document embedded GPIO controller
gpio: tc9563: Add support for the embedded GPIO controller
PCI: qcom: Skip DWC MSI host initialization when DT 'msi-map' is present
PCI: qcom: Ignore -ENODEV after Root Port reset
PCI: qcom-ep: Deinitialize endpoint on remove
PCI/sysfs: Reject unaligned resource I/O port accesses
PCI: rcar-gen4: Add missing PM ops
PCI: endpoint: pci-epf-vntb: Honor MSI-X selection
PCI: endpoint: pci-epf-vntb: Use a local epf pointer in interrupt setup
PCI: dwc: imx6: Use regmap_assign_bits() for conditional set/clear
PCI: dwc: Describe DWC PCIe fields with full masks and FIELD_PREP()
PCI: dwc: Rename pp->irq_domain to pp->msi_irq_domain
PCI: dwc: Rename dw_pcie_allocate_domains() to dw_pcie_allocate_msi_domains()
PCI: dwc: Correct PCIE_DW_PLAT_EP reference in Kconfig help
PCI/ASPM: Disable ASPM when driver requests it
...
Pull networking updates from Paolo Abeni:
"This includes a significant number of low-priority fixes - especially
in the NIC drivers area - that we deferred from the last few RCs in
the previous cycle, which can't be easily outlined in the synopsis
below.
Core & protocols:
- Continue the work on removing rtnl_lock dependencies:
- per-netns ARP and ND neighbour tables, with the default settings
now configurable per netns (inheritance from init_net is
controlled by the new net.core.neigh_inherit_init_net sysctl)
- RCU-protected configuration and rtnl_lock-less fill_info() for
hsr, netkit, sit, vlan and vxlan devices
- per-netns device unregistration for ip tunnel and gre devices
- use the netdev instance lock instead of rtnl_lock when reading
speed and duplex via sysfs
- batch the flushing of uncached routes at device unregistration
time, relieving rtnl_lock contention on netns dismantle.
- Add hardware pacing offload support, admin-controlled via a new
rtnetlink attribute, with sch_fq integration (implemented in idpf).
- Re-segment BIG TCP GSO packets into GSO packets fitting the egress
device limits instead of plain MSS-sized segments, improving
throughput for mixed BIG TCP / non-BIG TCP paths by up to 70%.
- Generate RSS keys that spread flows over all the RX queues; the
previous random keys could leave some queues unused.
- Optimize the bridge VLAN forwarding paths: cache the port-VLAN in
fdb entries and consider only VLAN members when flooding, for ~10%
more Mpps in the fdb forwarding path.
- A few TCP/IP performance improvements aimed at efficient cache
usage and reducing contention.
- Add the TCP ROCCET congestion control, a CUBIC variant aimed at
avoiding bufferbloat in cellular networks.
- Continue the conversion of getsockopt callbacks to sockopt_t.
- Add an ethtool command to list the front-facing ports of an
interface, including SFP cages and modules, using the phy_port
representation.
- Enable BIG TCP support for bareudp tunnels.
- Remove the IPV6_ADDRFORM socket option and disallow buggy TCP state
transitions (listen() + shutdown() + connect() and connect() +
connect(AF_UNSPEC) + listen()).
- Remove most BUG_ON()s from core packet processing, replacing them
with error paths.
Wireless:
- Latency improvements, including lockless station get/dump and
beacon updates, plus RTNL reduction and locking cleanups.
- Infrastructure for non-station TX/RX with MLO.
- NAN (Wi-Fi Aware) Instant Communication support and other NAN
improvements.
- Control frame Integrity Protocol (CIP) and protected TWT support.
- Improvements for AP regulatory checks.
Netfilter:
- Disable br_netfilter in user namespaces and schedule it for removal
in 2027.
- Restrict the raw table in nft_compat to the specific family, hook
and priority.
- Prepare the flowtable for mixed IPv4-over-IPv6 tunneling (and vice
versa).
- Use GFP_KERNEL_ACCOUNT for most netfilter allocations, for better
integration with memcg.
- Allow discovering conntrack zone filtering support in ctnetlink
dumps, and fix nfnetlink_hook handling of large dumps.
Deletions:
- Move the LLC type 2 sockets out of tree. There are no known users
and the code attracts a never-ending stream of LLM-driven fixes.
Device drivers:
- New drivers:
- Meta Platforms NIC (mpnic), the second-generation NIC from Meta
- initial skeleton of the Nebula-matrix NICs driver (nbl)
- X-Powers AC200/AC300 Fast Ethernet PHYs
- Ethernet high-speed NICs:
- Intel:
- i40e: XDP metadata support for RX hash and VLAN tag
- ice: expose the E825 TSPLL state via the DPLL subsystem
- nVidia/Mellanox:
- move the data direct infrastructure from IB to core, in
preparation for netdev support.
- reduce the memory used per offloaded TC rule
- Meta (fbnic):
- support large io_uring zero-copy RX buffers
- Microsoft vNIC (mana):
- add BQL support
- Ethernet NICs consumer, and embedded:
- Airoha:
- LRO offload support
- Cadence (macb):
- context swapping for ringparam and MTU changes, avoiding
buffer loss under memory pressure
- Mucse (rnpgbe):
- TX/RX and link status support
- NXP (enetc):
- SR-IOV improvements and VF support for ENETC v4
- Qualcomm (ppe):
- IPQ5424 support
- Realtek PCI (r8169):
- phylink support
- RSS support for RTL8127
- Renesas (ravb):
- gPTP support for R-Car Gen4
- Synopsys (stmmac):
- XDP multi-buffer support on the TX side
- tc mqprio hw queue priority offload
- support for RK3568 SGMII, Allwinner H616 EMAC1, UltraRISC
DP1000 and Qualcomm sa8255p
- Ethernet switches:
- Mediatek (mt7530):
- fast age and change conduit support
- Microchip (ksz):
- support for KSZ8995XA/KS8995XA
- Microchip (lan966x):
- PCIe FDMA support, ~20x throughput increase in PCIe endpoint
- Microchip (sparx5):
- Time Aware Shaper (taprio) offload
- Motorcomm (yt921x):
- LED and SerDes PCS support
- Realtek (rtl8365mb):
- EEE support
- Ethernet PHYs:
- Broadcom:
- enable jumbo frames on BCM54xx
- Realtek:
- support for RTL8261CE_CG and RTL8261D_VM
- MDIO support for RTL838x and RTL839x
- WiFi drivers:
- Broadcom (brcmfmac):
- FT/OKC roaming offload
- Intel (iwlwifi):
- UHR sniffer support
- support for newer UEFI/BIOS tables
- MediaTek (mt76):
- mt7925 NAN improvements
- offchannel/scan improvements and MLO fixes
- Morse Micro (mm81x):
- monitor mode support
- Qualcomm (ath12k):
- IPQ5332 platform infrastructure
- Realtek (rtw88):
- RTL8723BS support
- SDIO TX performance improvements
- Realtek (rtw89):
- P2P_DEVICE support
- BT-coex updates for RTL8922D
- Bluetooth:
- move H:4 reassembly into the Bluetooth core
- add generic support for vendor packets
- MGMT: add security level changed event
- Bluetooth drivers:
- btusb: support Bulk Serialization Mode
- Intel: support Draco and Titan Lake, allow unsigned firmware
- Mediatek: MT7928 support
- Qualcomm: QCC2072 support
- Broadcom: Synaptics 4384 support"
* tag 'net-next-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2126 commits)
Bluetooth: btusb: disable by default Qualcomm multi-subsystem
tipc: fix broadcast sender hang on last acker departure
tipc: fix use-after-free of broadcast reception link at node release
r8169: clear TX LPI on RTL8168h at link up after phylink conversion
tun: Require CAP_NET_ADMIN to attach to an ownerless device
net/sched/sch_cake: drop dead nla_nest_end() error check
net/sched/sch_cake: widen buffer_used to u64
net/sched/sch_cake: reduce parent backlog when clearing a tin
net/sched/sch_cake: serialize reconfiguration with the datapath
tg3: Add Datto SIRIS 5 1U Server to restart AER quirk table
net/mlx5e: Stop asserting for RTNL when closing channels
net: shrink the payload-only part of skb dataref to one bit
net: wwan: iosm: validate msg_head before indexing msg_ring
net: bgmac: rate limit RX error messages
selftests: net: veth: test XDP_TX to a peer with GRO enabled
veth: schedule the peer's NAPI after XDP_TX when only GRO is enabled
pppoe: delete session hash entries by pointer match
net: lan969x: don't disable hardirqs in fdma tx clear
net: sparx5/lan969x: do not clobber the PSFP cycle timer update period
net: lan969x: fix DSM calendar for empty taxis
...
Pull SoC driver updates from Arnd Bergmann:
"There are lots of minor updates for driver subsystems managed through
the soc tree (turris-omnia platform, cache driver, tee drivers,
arm-cci, bus, memory) as well as soc vendor specific drivers
(starfive, xilinx, microchip, nxp, amlogic, imx, renesas, samsung, ti,
nvidia).
The more notable changes are:
- Larger updates for Qualcomm SoCs including support for SM8950
(Maili) SM8975 (Hawi), Glymur, Shikra, and IPQ5424
- Added SoC support for Exynos5515, Tegra264, Tegra410, R8A774A3, and
MT8167 in existing drivers
- Arm SCMI firmware driver support for ACPI PCC transport and module
autoloading of protocol specific drivers
- Apple crash log support for CrgA embedded controller"
* tag 'soc-drivers-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (176 commits)
platform: cznic: turris-omnia-mcu: stop button emulation producers
cache: Make cpu_cache_invalidate_memregion() error out if there are no handlers
soc: mpfs: use kref cleanup on probe failure
arm64: enable HAVE_SHARED_GPIOS for all ARM64 platforms
bus: arm-cci: Drop cci-control-port node reference in __cci_ace_get_port()
bus: arm-cci: Drop CPU node reference in cci_ace_init_ports()
soc: fsl: dpio: Free the IRQ before releasing the I/O object
soc: fsl: dpio: Fix cleanup on IRQ registration failure
bus: fsl-mc: Annotate fsl_mc_io.portal_virt_addr with __counted_by_ptr
bus: fsl-mc: drop the fwnode links of the dpmacs nodes
soc: fsl: cpm1: tsa: Fix clock leak in tsa_of_parse_tdms()
soc: qcom: geni-se: Drop unused icc_ddr parameter from geni_icc_get()
firmware: qcom: scm: Allow QSEECOM on ThinkPad T14s Gen 7
dt-bindings: mailbox: qcom: Document Maili CPUCP mailbox controller
dt-bindings: spmi: glymur-spmi-pmic-arb: Add compatible for Qualcomm Maili SoC
soc: qcom: pmic_pdcharger_ulog: prevent work requeue during remove
ASoC: dt-bindings: qcom,apr: Add modem_apps GLINK channel for shikra
firmware: qcom: tzmem: disable SHM bridge for SM7125 platform
soc: qcom: ubwc: Add Kalambo UBWC config
firmware: qcom: scm: Allow QSEECOM on Kalambo CRD
...
Remove the local TC9563_GPIO_MASK and TC9563_GPIO_DEASSERT_BITS definitions, which are no longer used after switching to the GPIO descriptor API. Move TC9563_GPIO_CONFIG and TC9563_RESET_GPIO definitions in tc9563.h header file. Replace the direct regmap-based per-port reset logic in assert_deassert_reset() with gpiod_direction_output() calls, falling back to the legacy regmap approach only when no reset-gpios DT property is present for a given port. Add the reset GPIO pointer to struct tc9563_pwrctrl_cfg and introduce tc9563_pwrctrl_parse_reset_line() to look up reset-gpios from each PCI downstream port child node. The lookup is done lazily at the beginning of power_on(), returning -EPROBE_DEFER until the GPIO chip is registered. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Reviewed-by: Alex Elder <elder@riscstar.com> Link: https://patch.msgid.link/20260909-pci-tc9563-aux-v5-4-c9b33f56c8d3@oss.qualcomm.com
Add a driver for the GPIO controller embedded in the Toshiba TC9563 PCIe switch (and the Qualcomm QPS615). The device implements 37 GPIOs using two register banks: three registers control the first 32 GPIOs and three more control GPIOs 32-36. GPIOs 20 and 21 are reserved while GPIOs 22-24, 27-28, 31, and 34 are input-only. Register the driver as an auxiliary device driver. The TC9563 power controller creates the auxiliary device and provides a regmap that gives access to the GPIO registers, so use the gpio-regmap helpers to implement the GPIO chip. Signed-off-by: Alex Elder <elder@riscstar.com> Co-developed-by: Daniel Thompson <daniel@riscstar.com> Signed-off-by: Daniel Thompson <daniel@riscstar.com> Co-developed-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com> [bhelgaas: commit log per https://lore.kernel.org/arQ2mDjqHv4gmoOK@lore-desk] [bhelgaas: squash Geert Uytterhoeven <geert+renesas@glider.be> Kconfig fix: https://lore.kernel.org/all/45484c37512a3102495d8b75b6e9f72a141ba42e.1792574560.git.geert+renesas@glider.be, Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Acked-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Linus Walleij <linusw@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Link: https://patch.msgid.link/20260909-pci-tc9563-aux-v5-2-c9b33f56c8d3@oss.qualcomm.com
TI SoC driver updates for v7.4 Small cleanup-only pull request for drivers/firmware and drivers/soc/ti. It contains no functional changes to SoC behavior and no new features Firmware: - ti_sci: Simplify the buffer pointer allocation by using kzalloc() in place of kcalloc() - ti_sci: Fix a typo in comments SoC drivers: - k3-ringacc: Correct the ring API kernel-doc and the DMA ring initialization kernel-doc so the documentation matches the code - knav_qmss: Fix typos in comments * tag 'ti-driver-soc-for-v7.4' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: soc: ti: k3-ringacc: Fix DMA ring initialization kernel-doc soc: ti: k3-ringacc: Correct ring API kernel-doc firmware: ti_sci: replace kcalloc with kzalloc for buffer pointer allocation soc: ti: knav_qmss: Fix typos in comments firmware: ti_sci: Fix typo "upto" in comments Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cross-merge networking fixes after downstream PR (net-7.3-rc7).
Conflicts:
include/net/strparser.h
0984ebc631792 ("strparser: make sure __strp_recv isn't running before tearing down the parser")
02fd0a2111374 ("net: strparser: removed the aborted bit and aborts counter")
https://lore.kernel.org/asYfmLsfy-SCxXjr@sirena.co.uk
Adjacent changes:
Documentation/networking/strparser.rst
5f193cdabf25 ("docs: networking: strparser: remove general mode")
0984ebc63179 ("strparser: make sure __strp_recv isn't running before tearing down the parser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of using ".cpu generic+lse", use ".arch_extension lse" to enable LSE. The ".cpu generic+lse" directive replaces the assembler's current feature set with generic+lse, dropping other previously enabled features. In contrast, ".arch_extension lse" enables LSE while preserving the current feature set. For example, the following code is rejected with "selected processor does not support retaa", because ".cpu generic+lse" drops PAuth even though it was enabled by armv9-a: .arch armv9-a .text .cpu generic+lse retaa We encountered this issue while building the kernel with GCC configured using --with-arch=armv9-a. Since Armv9-A includes pointer authentication, GCC can assume that PAuth instructions are available and may use retaa when generating PAuth-protected returns. Signed-off-by: Emanuele Rocca <emanuele.rocca@arm.com> Link: https://patch.msgid.link/20261005162137.71397-1-emanuele.rocca@arm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>