linux-toradex.git/include/linux/socket.h, branch v4.13-rc4

tls: kernel TLS support

2017-06-15T16:12:40+00:00

Software implementation of transport layer security, implemented using ULP
infrastructure.  tcp proto_ops are replaced with tls equivalents of sendmsg and
sendpage.

Only symmetric crypto is done in the kernel, keys are passed by setsockopt
after the handshake is complete.  All control messages are supported via CMSG
data - the actual symmetric encryption is the same, just the message type needs
to be passed separately.

For user API, please see Documentation patch.

Pieces that can be shared between hw and sw implementation
are in tls_main.c

Signed-off-by: Boris Pismenny 
Signed-off-by: Ilya Lesokhin 
Signed-off-by: Aviad Yehezkel 
Signed-off-by: Dave Watson 
Signed-off-by: David S. Miller

smc: establish new socket family

2017-01-09T21:07:38+00:00

* enable smc module loading and unloading
 * register new socket family
 * basic smc socket creation and deletion
 * use backing TCP socket to run CLC (Connection Layer Control)
   handshake of SMC protocol
 * Setup for infiniband traffic is implemented in follow-on patches.
   For now fallback to TCP socket is always used.

Signed-off-by: Ursula Braun 
Reviewed-by: Utz Bacher 
Signed-off-by: David S. Miller

scm: remove use CMSG{_COMPAT}_ALIGN(sizeof(struct {compat_}cmsghdr))

2017-01-04T18:04:37+00:00

sizeof(struct cmsghdr) and sizeof(struct compat_cmsghdr) already aligned.
remove use CMSG_ALIGN(sizeof(struct cmsghdr)) and
CMSG_COMPAT_ALIGN(sizeof(struct compat_cmsghdr)) keep code consistent.

Signed-off-by: yuan linyu 
Signed-off-by: David S. Miller

net: Add Qualcomm IPC router

2016-05-09T03:46:14+00:00

Add an implementation of Qualcomm's IPC router protocol, used to
communicate with service providing remote processors.

Signed-off-by: Courtney Cavin 
Signed-off-by: Bjorn Andersson 
[bjorn: Cope with 0 being a valid node id and implement RTM_NEWADDR]
Signed-off-by: Bjorn Andersson 
Signed-off-by: David S. Miller

kcm: Kernel Connection Multiplexor module

2016-03-09T21:36:14+00:00

This module implements the Kernel Connection Multiplexor.

Kernel Connection Multiplexor (KCM) is a facility that provides a
message based interface over TCP for generic application protocols.
With KCM an application can efficiently send and receive application
protocol messages over TCP using datagram sockets.

For more information see the included Documentation/networking/kcm.txt

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller

net: Add MSG_BATCH flag

2016-03-09T21:36:13+00:00

Add a new msg flag called MSG_BATCH. This flag is used in sendmsg to
indicate that more messages will follow (i.e. a batch of messages is
being sent). This is similar to MSG_MORE except that the following
messages are not merged into one packet, they are sent individually.
sendmmsg is updated so that each contained message except for the
last one is marked as MSG_BATCH.

MSG_BATCH is a performance optimization in cases where a socket
implementation can benefit by transmitting packets in a batch.

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller

new helper: msg_data_left()

2015-04-11T19:53:35+00:00

convert open-coded instances

Signed-off-by: Al Viro

net: socket: add support for async operations

2015-03-23T20:41:36+00:00

Add support for async operations.

Signed-off-by: Tadeusz Struk 
Signed-off-by: David S. Miller

mpls: Basic routing support

2015-03-04T05:26:06+00:00

This change adds a new Kconfig option MPLS_ROUTING.

The core of this change is the code to look at an mpls packet received
from another machine.  Look that packet up in a routing table and
forward the packet on.

Support of MPLS over ATM is not considered or attempted here.  This
implemntation follows RFC3032 and implements the MPLS shim header that
can pass over essentially any network.

What RFC3021 refers to as the as the Incoming Label Map (ILM) I call
net->mpls.platform_label[].  What RFC3031 refers to as the Next Label
Hop Forwarding Entry (NHLFE) I call mpls_route.  Though calling it the
label fordwarding information base (lfib) might also be valid.

Further the implemntation forwards packets as described in RFC3032.
There is no need and given the original motivation for MPLS a strong
discincentive to have a flexible label forwarding path.  In essence
the logic is the topmost label is read, looked up, removed, and
replaced by 0 or more new lables and the sent out the specified
interface to it's next hop.

Quite a few optional features are not implemented here.  Among them
are generation of ICMP errors when the TTL is exceeded or the packet
is larger than the next hop MTU (those conditions are detected and the
packets are dropped instead of generating an icmp error).  The traffic
class field is always set to 0.  The implementation focuses on IP over
MPLS and does not handle egress of other kinds of protocols.

Instead of implementing coordination with the neighbour table and
sorting out how to input next hops in a different address family (for
which there is value).  I was lazy and implemented a next hop mac
address instead.  The code is simpler and there are flavor of MPLS
such as MPLS-TP where neither an IPv4 nor an IPv6 next hop is
appropriate so a next hop by mac address would need to be implemented
at some point.

Two new definitions AF_MPLS and PF_MPLS are exposed to userspace.

Decoding the mpls header must be done by first byeswapping a 32bit bit
endian word into the local cpu endian and then bit shifting to extract
the pieces.  There is no C bit-field that can represent a wire format
mpls header on a little endian machine as the low bits of the 20bit
label wind up in the wrong half of third byte.  Therefore internally
everything is deal with in cpu native byte order except when writing
to and reading from a packet.

For management simplicity if a label is configured to forward out
an interface that is down the packet is dropped early.  Similarly
if an network interface is removed rt_dev is updated to NULL
(so no reference is preserved) and any packets for that label
are dropped.  Keeping the label entries in the kernel allows
the kernel label table to function as the definitive source
of which labels are allocated and which are not.

Signed-off-by: "Eric W. Biederman" 
Signed-off-by: David S. Miller

net: bury net/core/iovec.c - nothing in there is used anymore

2015-02-04T06:34:15+00:00

Signed-off-by: Al Viro