linux-toradex.git/include/linux/soundwire, branch master

Merge tag 'soundwire-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire

2026-08-24T19:16:16+00:00

Pull soundwire updates from Vinod Koul:

 - Intel dmi quirks ghost list handling for Asus Zenbook Duo,
   Asus ROG Zephyrus Duo and Asus Expertbook. Intel Peripheral
   bra_block_alignment handling

 - Cadence library BRA_NumBytes[8] support

 - Qualcomm SCP address paging, bus mclk_freq support. Increase of
   data ports to 17 and driver improvements

* tag 'soundwire-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: dmi-quirks: Disable ghost Realtek on Asus ROG Zephyrus Duo
  soundwire: stream: validate slave port properties
  soundwire: honor clock_reg_supported in the clock scaling check
  soundwire: qcom: set the bus mclk_freq property
  soundwire: dmi-quirks: Disable ghost Realtek on Asus Zenbook Duo
  soundwire: intel_ace2x: handle the max_data_per_frame property
  soundwire: get mipi-sdw-bra-mode-max-data-per-frame property
  soundwire: intel: handle Peripheral bra_block_alignment
  soundwire: Add bra_block_alignment property support
  soundwire: cadence_master: add BRA_NumBytes[8] support
  soundwire: bus.h: repair kernel-doc comments
  soundwire: intel_auxdevice: Add cs42l44 to wake_capable_list
  soundwire: qcom: add SCP address paging support
  soundwire: dmi-quirks: add a global ghost list
  soundwire: dmi-quirks: Disable ghost Realtek on Asus Expertbook
  soundwire: qcom: Allocate sruntime array dynamically
  soundwire: qcom: Fix port exhaustion check in stream_alloc_ports
  dt-bindings: soundwire: qcom: Increase max data ports to 17

soundwire: intel_ace2x: handle the max_data_per_frame property

2026-08-06T08:33:45+00:00

The optional property indicates the maximum data payload size for the
BRA mode.

Signed-off-by: Bard Liao 
Reviewed-by: Péter Ujfalusi 
Reviewed-by: Pierre-Louis Bossart 
Link: https://patch.msgid.link/20260728124639.1484973-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: get mipi-sdw-bra-mode-max-data-per-frame property

2026-08-06T08:33:45+00:00

Get the mipi-sdw-bra-mode-max-data-per-frame property which indicates
the maximum data payload size (in bytes per frame excluding header,
CRC, and footer) for the BRA Mode.

Signed-off-by: Bard Liao 
Reviewed-by: Péter Ujfalusi 
Reviewed-by: Pierre-Louis Bossart 
Link: https://patch.msgid.link/20260728124639.1484973-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: Add bra_block_alignment property support

2026-08-06T08:33:45+00:00

Add a property to struct sdw_slave_prop equivalent to the Disco
property "mipi-sdw-bra-mode-block-alignment".

The SoundWire Disco specification defines this as:

"The data payload size for this BRA Mode shall be an integer
multiple of the value of this Property."

Signed-off-by: Richard Fitzgerald 
Co-developed-by: Bard Liao 
Signed-off-by: Bard Liao 
Reviewed-by: Péter Ujfalusi 
Reviewed-by: Pierre-Louis Bossart 
Link: https://patch.msgid.link/20260728124639.1484973-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

Replace by more specific (headers)

2026-07-03T05:38:16+00:00

 is included in a many files:

	$ git grep '' ef0c9f75a195 | wc -l
	1598

; some of them are widely used headers. To stop mixing up different and
unrelated driver( type)s let the subsystem headers only use the subset
of the recently split  that are relevant for
them.

The fallout (I hope) is addressed in the previous commits that handle
sources relying on e.g.  pulling in the full legacy header
and thus providing pci_device_id.

Acked-by: Danilo Krummrich 
Acked-by: Takashi Sakamoto 
Link: https://patch.msgid.link/199fe46b624ba07fb9bd3e0cd6ff13757932cb5f.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub)

soundwire: Move wait for initialisation helper to header

2026-06-23T11:52:30+00:00

As SoundWire devices tend to enumerate on the bus after probe, drivers
frequently need to wait for the device to initialise from common driver
code. The common system is to split drivers into a core module and then
a module for each communication bus. These two facts tend to cause
Kconfig issues, the issue tends to be when SOUNDWIRE=m and DRIVER_I2C=y,
this usually selects DRIVER=y. The driver code then wants to call
sdw_slave_wait_for_init(), but this results in calling a module function
from built in code. A depends on SOUNDWIRE | !SOUNDWIRE could be added to
the end driver but this seems slightly off as it adds a lot of counter
intuitive depends.

A simpler solution is to make sdw_slave_wait_for_init() a static inline
function. As part of doing this add a check for the slave device being
NULL acknowledging that this is likely called from code that is shared
between control buses. It does require dropping the call to
sdw_show_ping_status() but this can be added back in end drivers that
used it originally.

Currently this is causing rand config issues on RT5682 and will soon
also cause similar problems on cs42l43.

Acked-by: Vinod Koul 
Acked-by: Arnd Bergmann 
Signed-off-by: Charles Keepax 
Link: https://patch.msgid.link/20260623101814.24044-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown

soundwire: Add a helper function to wait for device initialisation

2026-05-12T10:46:59+00:00

Add a new helper function to wait for the device to enumerate
and be initialised by the SoundWire core. Most of the SoundWire
drivers have very similar boiler plate code in their runtime
resume, and that boiler plate tends to access various internals
of the SoundWire structs which is a mild layering violation.

Adding a new core helper function greatly eases both of these
issues.

Acked-by: Vinod Koul 
Signed-off-by: Charles Keepax 
Link: https://patch.msgid.link/20260512103022.1154645-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown

soundwire: amd: refactor bandwidth calculation logic

2026-03-09T07:01:41+00:00

For current platforms(ACP6.3/ACP7.0/ACP7.1/ACP7.2), AMD SoundWire manager
doesn't have banked registers for data port programming on Manager's side.
Need to use fixed block offsets, hstart & hstop for manager ports.

Earlier amd manager driver has support for 12 MHz as a bus clock frequency
where frame rate is 48000 and number of bits is 500, frame shape as
50 x 10 with fixed block offset mapping based on port number.

Got a new requirement to support 6 MHz as a bus clock frequency.
For 6 MHz bus clock frequency amd manager driver needs to support two
different frame shapes i.e number of bits as 250 with frame rate as 48000
and frame shape as 125 x 2 and for the second combination number of bits as
500 where frame rate is 24000 and frame shape is 50 x 10.

Few SoundWire peripherals doesn't support 125 x 2 as a frame shape for
6 MHz bus clock frequency. They have explicit requirement for the frame
shape. In this scenario, amd manager driver needs to use 50 x 10 as a frame
shape where frame rate is 24000. Based on the platform and SoundWire
topology for 6Mhz support frame shape will be decided which is part of
SoundWire manager DisCo tables.

For current platforms, amd manager driver supports only two bus clock
frequencies(12 MHz & 6 MHz). Refactor bandwidth logic to support different
bus clock frequencies.

Signed-off-by: Vijendar Mukunda 
Reviewed-by: Pierre-Louis Bossart 
Link: https://patch.msgid.link/20260226065638.1251771-3-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul

soundwire: sdw.h: repair names and format of kernel-doc comments

2026-02-23T07:12:45+00:00

Fix all kernel-doc warnings in sdw.h:

Warning: include/linux/soundwire/sdw.h:538 cannot understand function prototype: 'enum sdw_reg_bank'
Warning: include/linux/soundwire/sdw.h:779 struct member 'port_num' not described in 'sdw_transport_params'
Warning: include/linux/soundwire/sdw.h:792 struct member 'port_num' not described in 'sdw_enable_ch'
Warning: include/linux/soundwire/sdw.h:892 cannot understand function prototype: 'struct sdw_port_config'
Warning: include/linux/soundwire/sdw.h:906 cannot understand function prototype: 'struct sdw_stream_config'
Warning: include/linux/soundwire/sdw.h:925 cannot understand function prototype: 'enum sdw_stream_state'
Warning: include/linux/soundwire/sdw.h:942 cannot understand function prototype: 'struct sdw_stream_params'
Warning: include/linux/soundwire/sdw.h:960 cannot understand function prototype: 'struct sdw_stream_runtime'
Warning: include/linux/soundwire/sdw.h:1047 struct member 'bpt_stream_refcount' not described in 'sdw_bus'

Signed-off-by: Randy Dunlap 
Reviewed-by: Charles Keepax 
Link: https://patch.msgid.link/20260216054418.2766846-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul

soundwire: Make remove function return no value

2025-12-23T06:42:49+00:00

All remove functions return zero and the driver core ignores any other
returned value (just emits a warning about it being ignored). So make all
remove callbacks return void instead of an ignored int. This is in line
with most other subsystems.

Signed-off-by: Uwe Kleine-König 
Link: https://patch.msgid.link/20251215174925.1327021-5-u.kleine-koenig@baylibre.com
Signed-off-by: Vinod Koul