Pull pidfd system call from Christian Brauner:
 "This introduces the ability to use file descriptors from /proc/<pid>/
  as stable handles on struct pid. Even if a pid is recycled the handle
  will not change. For a start these fds can be used to send signals to
  the processes they refer to.

  With the ability to use /proc/<pid> fds as stable handles on struct
  pid we can fix a long-standing issue where after a process has exited
  its pid can be reused by another process. If a caller sends a signal
  to a reused pid it will end up signaling the wrong process.

  With this patchset we enable a variety of use cases. One obvious
  example is that we can now safely delegate an important part of
  process management - sending signals - to processes other than the
  parent of a given process by sending file descriptors around via scm
  rights and not fearing that the given process will have been recycled
  in the meantime. It also allows for easy testing whether a given
  process is still alive or not by sending signal 0 to a pidfd which is
  quite handy.

  There has been some interest in this feature e.g. from systems
  management (systemd, glibc) and container managers. I have requested
  and gotten comments from glibc to make sure that this syscall is
  suitable for their needs as well. In the future I expect it to take on
  most other pid-based signal syscalls. But such features are left for
  the future once they are needed.

  This has been sitting in linux-next for quite a while and has not
  caused any issues. It comes with selftests which verify basic
  functionality and also test that a recycled pid cannot be signaled via
  a pidfd.

  Jon has written about a prior version of this patchset. It should
  cover the basic functionality since not a lot has changed since then:

      https://lwn.net/Articles/773459/

  The commit message for the syscall itself is extensively documenting
  the syscall, including it's functionality and extensibility"

* tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  selftests: add tests for pidfd_send_signal()
  signal: add pidfd_send_signal() syscall

Pull io_uring IO interface from Jens Axboe:
 "Second attempt at adding the io_uring interface.

  Since the first one, we've added basic unit testing of the three
  system calls, that resides in liburing like the other unit tests that
  we have so far. It'll take a while to get full coverage of it, but
  we're working towards it. I've also added two basic test programs to
  tools/io_uring. One uses the raw interface and has support for all the
  various features that io_uring supports outside of standard IO, like
  fixed files, fixed IO buffers, and polled IO. The other uses the
  liburing API, and is a simplified version of cp(1).

  This adds support for a new IO interface, io_uring.

  io_uring allows an application to communicate with the kernel through
  two rings, the submission queue (SQ) and completion queue (CQ) ring.
  This allows for very efficient handling of IOs, see the v5 posting for
  some basic numbers:

    https://lore.kernel.org/linux-block/20190116175003.17880-1-axboe@kernel.dk/

  Outside of just efficiency, the interface is also flexible and
  extendable, and allows for future use cases like the upcoming NVMe
  key-value store API, networked IO, and so on. It also supports async
  buffered IO, something that we've always failed to support in the
  kernel.

  Outside of basic IO features, it supports async polled IO as well.
  This particular feature has already been tested at Facebook months ago
  for flash storage boxes, with 25-33% improvements. It makes polled IO
  actually useful for real world use cases, where even basic flash sees
  a nice win in terms of efficiency, latency, and performance. These
  boxes were IOPS bound before, now they are not.

  This series adds three new system calls. One for setting up an
  io_uring instance (io_uring_setup(2)), one for submitting/completing
  IO (io_uring_enter(2)), and one for aux functions like registrating
  file sets, buffers, etc (io_uring_register(2)). Through the help of
  Arnd, I've coordinated the syscall numbers so merge on that front
  should be painless.

  Jon did a writeup of the interface a while back, which (except for
  minor details that have been tweaked) is still accurate. Find that
  here:

    https://lwn.net/Articles/776703/

  Huge thanks to Al Viro for helping getting the reference cycle code
  correct, and to Jann Horn for his extensive reviews focused on both
  security and bugs in general.

  There's a userspace library that provides basic functionality for
  applications that don't need or want to care about how to fiddle with
  the rings directly. It has helpers to allow applications to easily set
  up an io_uring instance, and submit/complete IO through it without
  knowing about the intricacies of the rings. It also includes man pages
  (thanks to Jeff Moyer), and will continue to grow support helper
  functions and features as time progresses. Find it here:

    git://git.kernel.dk/liburing

  Fio has full support for the raw interface, both in the form of an IO
  engine (io_uring), but also with a small test application (t/io_uring)
  that can exercise and benchmark the interface"

* tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-block:
  io_uring: add a few test tools
  io_uring: allow workqueue item to handle multiple buffered requests
  io_uring: add support for IORING_OP_POLL
  io_uring: add io_kiocb ref count
  io_uring: add submission polling
  io_uring: add file set registration
  net: split out functions related to registering inflight socket files
  io_uring: add support for pre-mapped user IO buffers
  block: implement bio helper to add iter bvec pages to bio
  io_uring: batch io_kiocb allocation
  io_uring: use fget/fput_many() for file references
  fs: add fget_many() and fput_many()
  io_uring: support for IO polling
  io_uring: add fsync support
  Add io_uring IO interface

The kill() syscall operates on process identifiers (pid). After a process
has exited its pid can be reused by another process. If a caller sends a
signal to a reused pid it will end up signaling the wrong process. This
issue has often surfaced and there has been a push to address this problem [1].

This patch uses file descriptors (fd) from proc/<pid> as stable handles on
struct pid. Even if a pid is recycled the handle will not change. The fd
can be used to send signals to the process it refers to.
Thus, the new syscall pidfd_send_signal() is introduced to solve this
problem. Instead of pids it operates on process fds (pidfd).

/* prototype and argument /*
long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags);

/* syscall number 424 */
The syscall number was chosen to be 424 to align with Arnd's rework in his
y2038 to minimize merge conflicts (cf. [25]).

In addition to the pidfd and signal argument it takes an additional
siginfo_t and flags argument. If the siginfo_t argument is NULL then
pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it
is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo().
The flags argument is added to allow for future extensions of this syscall.
It currently needs to be passed as 0. Failing to do so will cause EINVAL.

/* pidfd_send_signal() replaces multiple pid-based syscalls */
The pidfd_send_signal() syscall currently takes on the job of
rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a
positive pid is passed to kill(2). It will however be possible to also
replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended.

/* sending signals to threads (tid) and process groups (pgid) */
Specifically, the pidfd_send_signal() syscall does currently not operate on
process groups or threads. This is left for future extensions.
In order to extend the syscall to allow sending signal to threads and
process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and
PIDFD_TYPE_TID) should be added. This implies that the flags argument will
determine what is signaled and not the file descriptor itself. Put in other
words, grouping in this api is a property of the flags argument not a
property of the file descriptor (cf. [13]). Clarification for this has been
requested by Eric (cf. [19]).
When appropriate extensions through the flags argument are added then
pidfd_send_signal() can additionally replace the part of kill(2) which
operates on process groups as well as the tgkill(2) and
rt_tgsigqueueinfo(2) syscalls.
How such an extension could be implemented has been very roughly sketched
in [14], [15], and [16]. However, this should not be taken as a commitment
to a particular implementation. There might be better ways to do it.
Right now this is intentionally left out to keep this patchset as simple as
possible (cf. [4]).

/* naming */
The syscall had various names throughout iterations of this patchset:
- procfd_signal()
- procfd_send_signal()
- taskfd_send_signal()
In the last round of reviews it was pointed out that given that if the
flags argument decides the scope of the signal instead of different types
of fds it might make sense to either settle for "procfd_" or "pidfd_" as
prefix. The community was willing to accept either (cf. [17] and [18]).
Given that one developer expressed strong preference for the "pidfd_"
prefix (cf. [13]) and with other developers less opinionated about the name
we should settle for "pidfd_" to avoid further bikeshedding.

The  "_send_signal" suffix was chosen to reflect the fact that the syscall
takes on the job of multiple syscalls. It is therefore intentional that the
name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the
fomer because it might imply that pidfd_send_signal() is a replacement for
kill(2), and not the latter because it is a hassle to remember the correct
spelling - especially for non-native speakers - and because it is not
descriptive enough of what the syscall actually does. The name
"pidfd_send_signal" makes it very clear that its job is to send signals.

/* zombies */
Zombies can be signaled just as any other process. No special error will be
reported since a zombie state is an unreliable state (cf. [3]). However,
this can be added as an extension through the @flags argument if the need
ever arises.

/* cross-namespace signals */
The patch currently enforces that the signaler and signalee either are in
the same pid namespace or that the signaler's pid namespace is an ancestor
of the signalee's pid namespace. This is done for the sake of simplicity
and because it is unclear to what values certain members of struct
siginfo_t would need to be set to (cf. [5], [6]).

/* compat syscalls */
It became clear that we would like to avoid adding compat syscalls
(cf. [7]).  The compat syscall handling is now done in kernel/signal.c
itself by adding __copy_siginfo_from_user_generic() which lets us avoid
compat syscalls (cf. [8]). It should be noted that the addition of
__copy_siginfo_from_user_any() is caused by a bug in the original
implementation of rt_sigqueueinfo(2) (cf. 12).
With upcoming rework for syscall handling things might improve
significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain
any additional callers.

/* testing */
This patch was tested on x64 and x86.

/* userspace usage */
An asciinema recording for the basic functionality can be found under [9].
With this patch a process can be killed via:

 #define _GNU_SOURCE
 #include <errno.h>
 #include <fcntl.h>
 #include <signal.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <sys/stat.h>
 #include <sys/syscall.h>
 #include <sys/types.h>
 #include <unistd.h>

 static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info,
                                         unsigned int flags)
 {
 #ifdef __NR_pidfd_send_signal
         return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags);
 #else
         return -ENOSYS;
 #endif
 }

 int main(int argc, char *argv[])
 {
         int fd, ret, saved_errno, sig;

         if (argc < 3)
                 exit(EXIT_FAILURE);

         fd = open(argv[1], O_DIRECTORY | O_CLOEXEC);
         if (fd < 0) {
                 printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]);
                 exit(EXIT_FAILURE);
         }

         sig = atoi(argv[2]);

         printf("Sending signal %d to process %s\n", sig, argv[1]);
         ret = do_pidfd_send_signal(fd, sig, NULL, 0);

         saved_errno = errno;
         close(fd);
         errno = saved_errno;

         if (ret < 0) {
                 printf("%s - Failed to send signal %d to process %s\n",
                        strerror(errno), sig, argv[1]);
                 exit(EXIT_FAILURE);
         }

         exit(EXIT_SUCCESS);
 }

/* Q&A
 * Given that it seems the same questions get asked again by people who are
 * late to the party it makes sense to add a Q&A section to the commit
 * message so it's hopefully easier to avoid duplicate threads.
 *
 * For the sake of progress please consider these arguments settled unless
 * there is a new point that desperately needs to be addressed. Please make
 * sure to check the links to the threads in this commit message whether
 * this has not already been covered.
 */
Q-01: (Florian Weimer [20], Andrew Morton [21])
      What happens when the target process has exited?
A-01: Sending the signal will fail with ESRCH (cf. [22]).

Q-02:  (Andrew Morton [21])
       Is the task_struct pinned by the fd?
A-02:  No. A reference to struct pid is kept. struct pid - as far as I
       understand - was created exactly for the reason to not require to
       pin struct task_struct (cf. [22]).

Q-03: (Andrew Morton [21])
      Does the entire procfs directory remain visible? Just one entry
      within it?
A-03: The same thing that happens right now when you hold a file descriptor
      to /proc/<pid> open (cf. [22]).

Q-04: (Andrew Morton [21])
      Does the pid remain reserved?
A-04: No. This patchset guarantees a stable handle not that pids are not
      recycled (cf. [22]).

Q-05: (Andrew Morton [21])
      Do attempts to signal that fd return errors?
A-05: See {Q,A}-01.

Q-06: (Andrew Morton [22])
      Is there a cleaner way of obtaining the fd? Another syscall perhaps.
A-06: Userspace can already trivially retrieve file descriptors from procfs
      so this is something that we will need to support anyway. Hence,
      there's no immediate need to add another syscalls just to make
      pidfd_send_signal() not dependent on the presence of procfs. However,
      adding a syscalls to get such file descriptors is planned for a
      future patchset (cf. [22]).

Q-07: (Andrew Morton [21] and others)
      This fd-for-a-process sounds like a handy thing and people may well
      think up other uses for it in the future, probably unrelated to
      signals. Are the code and the interface designed to permit such
      future applications?
A-07: Yes (cf. [22]).

Q-08: (Andrew Morton [21] and others)
      Now I think about it, why a new syscall? This thing is looking
      rather like an ioctl?
A-08: This has been extensively discussed. It was agreed that a syscall is
      preferred for a variety or reasons. Here are just a few taken from
      prior threads. Syscalls are safer than ioctl()s especially when
      signaling to fds. Processes are a core kernel concept so a syscall
      seems more appropriate. The layout of the syscall with its four
      arguments would require the addition of a custom struct for the
      ioctl() thereby causing at least the same amount or even more
      complexity for userspace than a simple syscall. The new syscall will
      replace multiple other pid-based syscalls (see description above).
      The file-descriptors-for-processes concept introduced with this
      syscall will be extended with other syscalls in the future. See also
      [22], [23] and various other threads already linked in here.

Q-09: (Florian Weimer [24])
      What happens if you use the new interface with an O_PATH descriptor?
A-09:
      pidfds opened as O_PATH fds cannot be used to send signals to a
      process (cf. [2]). Signaling processes through pidfds is the
      equivalent of writing to a file. Thus, this is not an operation that
      operates "purely at the file descriptor level" as required by the
      open(2) manpage. See also [4].

/* References */
[1]:  https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/
[2]:  https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/
[3]:  https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/
[4]:  https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/
[5]:  https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/
[6]:  https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/
[7]:  https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/
[8]:  https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/
[9]:  https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy
[11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/
[12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/
[13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/
[14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/
[15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/
[16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/
[17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/
[18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/
[19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/
[20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/
[21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/
[22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/
[23]: https://lwn.net/Articles/773459/
[24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/
[25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jann Horn <jannh@google.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>

If we have fixed user buffers, we can map them into the kernel when we
setup the io_uring. That avoids the need to do get_user_pages() for
each and every IO.

To utilize this feature, the application must call io_uring_register()
after having setup an io_uring instance, passing in
IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to
an iovec array, and the nr_args should contain how many iovecs the
application wishes to map.

If successful, these buffers are now mapped into the kernel, eligible
for IO. To use these fixed buffers, the application must use the
IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then
set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len
must point to somewhere inside the indexed buffer.

The application may register buffers throughout the lifetime of the
io_uring instance. It can call io_uring_register() with
IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of
buffers, and then register a new set. The application need not
unregister buffers explicitly before shutting down the io_uring
instance.

It's perfectly valid to setup a larger buffer, and then sometimes only
use parts of it for an IO. As long as the range is within the originally
mapped region, it will work just fine.

For now, buffers must not be file backed. If file backed buffers are
passed in, the registration will fail with -1/EOPNOTSUPP. This
restriction may be relaxed in the future.

RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat
arbitrary 1G per buffer size is also imposed.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.

IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.

Two new system calls are added for this:

io_uring_setup(entries, params)
	Sets up an io_uring instance for doing async IO. On success,
	returns a file descriptor that the application can mmap to
	gain access to the SQ ring, CQ ring, and io_uring_sqes.

io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
	Initiates IO against the rings mapped to this fd, or waits for
	them to complete, or both. The behavior is controlled by the
	parameters passed in. If 'to_submit' is non-zero, then we'll
	try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
	kernel will wait for 'min_complete' events, if they aren't
	already available. It's valid to set IORING_ENTER_GETEVENTS
	and 'min_complete' == 0 at the same time, this allows the
	kernel to return already completed events without waiting
	for them. This is useful only for polling, as for IRQ
	driven IO, the application can just check the CQ ring
	without entering the kernel.

With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.

For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.

Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.

Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

A lot of system calls that pass a time_t somewhere have an implementation
using a COMPAT_SYSCALL_DEFINEx() on 64-bit architectures, and have
been reworked so that this implementation can now be used on 32-bit
architectures as well.

The missing step is to redefine them using the regular SYSCALL_DEFINEx()
to get them out of the compat namespace and make it possible to build them
on 32-bit architectures.

Any system call that ends in 'time' gets a '32' suffix on its name for
that version, while the others get a '_time32' suffix, to distinguish
them from the normal version, which takes a 64-bit time argument in the
future.

In this step, only 64-bit architectures are changed, doing this rename
first lets us avoid touching the 32-bit architectures twice.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

struct timex is not y2038 safe.
Switch all the syscall apis to use y2038 safe __kernel_timex.

Note that sys_adjtimex() does not have a y2038 safe solution.  C libraries
can implement it by calling clock_adjtime(CLOCK_REALTIME, ...).

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

A small typo has crept into the y2038 conversion of the timer_settime
system call. So far this was completely harmless, but once we start
using the new version, this has to be fixed.

Fixes: 6ff847350702 ("time: Change types to new y2038 safe __kernel_itimerspec")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The behavior of these system calls is slightly different between
architectures, as determined by the CONFIG_ARCH_WANT_IPC_PARSE_VERSION
symbol. Most architectures that implement the split IPC syscalls don't set
that symbol and only get the modern version, but alpha, arm, microblaze,
mips-n32, mips-n64 and xtensa expect the caller to pass the IPC_64 flag.

For the architectures that so far only implement sys_ipc(), i.e. m68k,
mips-o32, powerpc, s390, sh, sparc, and x86-32, we want the new behavior
when adding the split syscalls, so we need to distinguish between the
two groups of architectures.

The method I picked for this distinction is to have a separate system call
entry point: sys_old_*ctl() now uses ipc_parse_version, while sys_*ctl()
does not. The system call tables of the five architectures are changed
accordingly.

As an additional benefit, we no longer need the configuration specific
definition for ipc_parse_version(), it always does the same thing now,
but simply won't get called on architectures with the modern interface.

A small downside is that on architectures that do set
ARCH_WANT_IPC_PARSE_VERSION, we now have an extra set of entry points
that are never called. They only add a few bytes of bloat, so it seems
better to keep them compared to adding yet another Kconfig symbol.
I considered adding new syscall numbers for the IPC_64 variants for
consistency, but decided against that for now.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The sys_ipc() and compat_ksys_ipc() functions are meant to only
be used from the system call table, not called by another function.

Introduce ksys_*() interfaces for this purpose, as we have done
for many other system calls.

Link: https://lore.kernel.org/lkml/20190116131527.2071570-3-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[heiko.carstens@de.ibm.com: compile fix for !CONFIG_COMPAT]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>