linux-toradex.git/include/linux/sysctl.h, branch v4.19-rc5

pipe, sysctl: remove pipe_proc_fn()

2018-02-07T02:32:47+00:00

pipe_proc_fn() is no longer needed, as it only calls through to
proc_dopipe_max_size().  Just put proc_dopipe_max_size() in the ctl_table
entry directly, and remove the unneeded EXPORT_SYMBOL() and the ENOSYS
stub for it.

(The reason the ENOSYS stub isn't needed is that the pipe-max-size
ctl_table entry is located directly in 'kern_table' rather than being
registered separately.  Therefore, the entry is already only defined when
the kernel is built with sysctl support.)

Link: http://lkml.kernel.org/r/20180111052902.14409-3-ebiggers3@gmail.com
Signed-off-by: Eric Biggers 
Acked-by: Kees Cook 
Acked-by: Joe Lawrence 
Cc: Alexander Viro 
Cc: "Luis R . Rodriguez" 
Cc: Michael Kerrisk 
Cc: Mikulas Patocka 
Cc: Willy Tarreau 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

pipe: add proc_dopipe_max_size() to safely assign pipe_max_size

2017-11-18T00:10:03+00:00

pipe_max_size is assigned directly via procfs sysctl:

  static struct ctl_table fs_table[] = {
          ...
          {
                  .procname       = "pipe-max-size",
                  .data           = &pipe_max_size,
                  .maxlen         = sizeof(int),
                  .mode           = 0644,
                  .proc_handler   = &pipe_proc_fn,
                  .extra1         = &pipe_min_size,
          },
          ...

  int pipe_proc_fn(struct ctl_table *table, int write, void __user *buf,
                   size_t *lenp, loff_t *ppos)
  {
          ...
          ret = proc_dointvec_minmax(table, write, buf, lenp, ppos)
          ...

and then later rounded in-place a few statements later:

          ...
          pipe_max_size = round_pipe_size(pipe_max_size);
          ...

This leaves a window of time between initial assignment and rounding
that may be visible to other threads.  (For example, one thread sets a
non-rounded value to pipe_max_size while another reads its value.)

Similar reads of pipe_max_size are potentially racy:

  pipe.c :: alloc_pipe_info()
  pipe.c :: pipe_set_size()

Add a new proc_dopipe_max_size() that consolidates reading the new value
from the user buffer, verifying bounds, and calling round_pipe_size()
with a single assignment to pipe_max_size.

Link: http://lkml.kernel.org/r/1507658689-11669-4-git-send-email-joe.lawrence@redhat.com
Signed-off-by: Joe Lawrence 
Reported-by: Mikulas Patocka 
Reviewed-by: Mikulas Patocka 
Cc: Al Viro 
Cc: Jens Axboe 
Cc: Michael Kerrisk 
Cc: Randy Dunlap 
Cc: Josh Poimboeuf 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

sysctl: add register_sysctl() dummy helper

2017-11-10T01:58:40+00:00

register_sysctl() has been around for five years with commit
fea478d4101a ("sysctl: Add register_sysctl for normal sysctl users") but
now that arm64 started using it, I ran into a compile error:

  arch/arm64/kernel/armv8_deprecated.c: In function 'register_insn_emulation_sysctl':
  arch/arm64/kernel/armv8_deprecated.c:257:2: error: implicit declaration of function 'register_sysctl'

This adds a inline function like we already have for
register_sysctl_paths() and register_sysctl_table().

Link: http://lkml.kernel.org/r/20171106133700.558647-1-arnd@arndb.de
Fixes: 38b9aeb32fa7 ("arm64: Port deprecated instruction emulation to new sysctl interface")
Signed-off-by: Arnd Bergmann 
Reviewed-by: Dave Martin 
Acked-by: Kees Cook 
Acked-by: Will Deacon 
Cc: Catalin Marinas 
Cc: "Luis R. Rodriguez" 
Cc: Alex Benne 
Cc: Arnd Bergmann 
Cc: "Eric W. Biederman" 
Cc: Thomas Gleixner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'gcc-plugins-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2017-07-19T15:55:18+00:00

Pull structure randomization updates from Kees Cook:
 "Now that IPC and other changes have landed, enable manual markings for
  randstruct plugin, including the task_struct.

  This is the rest of what was staged in -next for the gcc-plugins, and
  comes in three patches, largest first:

   - mark "easy" structs with __randomize_layout

   - mark task_struct with an optional anonymous struct to isolate the
     __randomize_layout section

   - mark structs to opt _out_ of automated marking (which will come
     later)

  And, FWIW, this continues to pass allmodconfig (normal and patched to
  enable gcc-plugins) builds of x86_64, i386, arm64, arm, powerpc, and
  s390 for me"

* tag 'gcc-plugins-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  randstruct: opt-out externally exposed function pointer structs
  task_struct: Allow randomized layout
  randstruct: Mark various structs for randomization

Merge branch 'akpm' (patches from Andrew)

2017-07-13T19:38:49+00:00

Merge yet more updates from Andrew Morton:

- various misc things

- kexec updates

- sysctl core updates

- scripts/gdb udpates

- checkpoint-restart updates

- ipc updates

- kernel/watchdog updates

- Kees's "rough equivalent to the glibc _FORTIFY_SOURCE=1 feature"

- "stackprotector: ascii armor the stack canary"

- more MM bits

- checkpatch updates

* emailed patches from Andrew Morton : (96 commits)
  writeback: rework wb_[dec|inc]_stat family of functions
  ARM: samsung: usb-ohci: move inline before return type
  video: fbdev: omap: move inline before return type
  video: fbdev: intelfb: move inline before return type
  USB: serial: safe_serial: move __inline__ before return type
  drivers: tty: serial: move inline before return type
  drivers: s390: move static and inline before return type
  x86/efi: move asmlinkage before return type
  sh: move inline before return type
  MIPS: SMP: move asmlinkage before return type
  m68k: coldfire: move inline before return type
  ia64: sn: pci: move inline before type
  ia64: move inline before return type
  FRV: tlbflush: move asmlinkage before return type
  CRIS: gpio: move inline before return type
  ARM: HP Jornada 7XX: move inline before return type
  ARM: KVM: move asmlinkage before type
  checkpatch: improve the STORAGE_CLASS test
  mm, migration: do not trigger OOM killer when migrating memory
  drm/i915: use __GFP_RETRY_MAYFAIL
  ...

sysctl: add unsigned int range support

2017-07-12T23:26:00+00:00

To keep parity with regular int interfaces provide the an unsigned int
proc_douintvec_minmax() which allows you to specify a range of allowed
valid numbers.

Adding proc_douintvec_minmax_sysadmin() is easy but we can wait for an
actual user for that.

Link: http://lkml.kernel.org/r/20170519033554.18592-6-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez 
Acked-by: Kees Cook 
Cc: Subash Abhinov Kasiviswanathan 
Cc: Heinrich Schuchardt 
Cc: Kees Cook 
Cc: "David S. Miller" 
Cc: Ingo Molnar 
Cc: Al Viro 
Cc: "Eric W. Biederman" 
Cc: Alexey Dobriyan 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

proc: Fix proc_sys_prune_dcache to hold a sb reference

2017-07-11T16:01:24+00:00

Andrei Vagin writes:
FYI: This bug has been reproduced on 4.11.7
> BUG: Dentry ffff895a3dd01240{i=4e7c09a,n=lo}  still in use (1) [unmount of proc proc]
> ------------[ cut here ]------------
> WARNING: CPU: 1 PID: 13588 at fs/dcache.c:1445 umount_check+0x6e/0x80
> CPU: 1 PID: 13588 Comm: kworker/1:1 Not tainted 4.11.7-200.fc25.x86_64 #1
> Hardware name: CompuLab sbc-flt1/fitlet, BIOS SBCFLT_0.08.04 06/27/2015
> Workqueue: events proc_cleanup_work
> Call Trace:
>  dump_stack+0x63/0x86
>  __warn+0xcb/0xf0
>  warn_slowpath_null+0x1d/0x20
>  umount_check+0x6e/0x80
>  d_walk+0xc6/0x270
>  ? dentry_free+0x80/0x80
>  do_one_tree+0x26/0x40
>  shrink_dcache_for_umount+0x2d/0x90
>  generic_shutdown_super+0x1f/0xf0
>  kill_anon_super+0x12/0x20
>  proc_kill_sb+0x40/0x50
>  deactivate_locked_super+0x43/0x70
>  deactivate_super+0x5a/0x60
>  cleanup_mnt+0x3f/0x90
>  mntput_no_expire+0x13b/0x190
>  kern_unmount+0x3e/0x50
>  pid_ns_release_proc+0x15/0x20
>  proc_cleanup_work+0x15/0x20
>  process_one_work+0x197/0x450
>  worker_thread+0x4e/0x4a0
>  kthread+0x109/0x140
>  ? process_one_work+0x450/0x450
>  ? kthread_park+0x90/0x90
>  ret_from_fork+0x2c/0x40
> ---[ end trace e1c109611e5d0b41 ]---
> VFS: Busy inodes after unmount of proc. Self-destruct in 5 seconds.  Have a nice day...
> BUG: unable to handle kernel NULL pointer dereference at           (null)
> IP: _raw_spin_lock+0xc/0x30
> PGD 0

Fix this by taking a reference to the super block in proc_sys_prune_dcache.

The superblock reference is the core of the fix however the sysctl_inodes
list is converted to a hlist so that hlist_del_init_rcu may be used.  This
allows proc_sys_prune_dache to remove inodes the sysctl_inodes list, while
not causing problems for proc_sys_evict_inode when if it later choses to
remove the inode from the sysctl_inodes list.  Removing inodes from the
sysctl_inodes list allows proc_sys_prune_dcache to have a progress
guarantee, while still being able to drop all locks.  The fact that
head->unregistering is set in start_unregistering ensures that no more
inodes will be added to the the sysctl_inodes list.

Previously the code did a dance where it delayed calling iput until the
next entry in the list was being considered to ensure the inode remained on
the sysctl_inodes list until the next entry was walked to.  The structure
of the loop in this patch does not need that so is much easier to
understand and maintain.

Cc: stable@vger.kernel.org
Reported-by: Andrei Vagin 
Tested-by: Andrei Vagin 
Fixes: ace0c791e6c3 ("proc/sysctl: Don't grab i_lock under sysctl_lock.")
Fixes: d6cffbbe9a7e ("proc/sysctl: prune stale dentries during unregistering")
Signed-off-by: "Eric W. Biederman"

randstruct: Mark various structs for randomization

2017-06-30T19:00:51+00:00

This marks many critical kernel structures for randomization. These are
structures that have been targeted in the past in security exploits, or
contain functions pointers, pointers to function pointer tables, lists,
workqueues, ref-counters, credentials, permissions, or are otherwise
sensitive. This initial list was extracted from Brad Spengler/PaX Team's
code in the last public patch of grsecurity/PaX based on my understanding
of the code. Changes or omissions from the original code are mine and
don't reflect the original grsecurity/PaX code.

Left out of this list is task_struct, which requires special handling
and will be covered in a subsequent patch.

Signed-off-by: Kees Cook

sysctl: Remove dead register_sysctl_root

2017-04-17T04:42:49+00:00

The function no longer does anything.  The is only a single caller of
register_sysctl_root when semantically there should be two.  Remove
this function so that if someone decides this functionality is needed
again it will be obvious all of the callers of setup_sysctl_set need
to be audited and modified appropriately.

Signed-off-by: "Eric W. Biederman"