linux-toradex.git/include/linux/usb/chipidea.h, branch v4.2-rc8 Linux kernel for Apalis and Colibri modules usb: chipidea: add a flag for turn on vbus early for host 2015-03-18T15:19:12+00:00 Li Jun b47624@freescale.com 2015-02-11T04:45:01+00:00 6adb9b7b5fb64be3c3e4d57578ea1446da91a8f9 Some usb PHYs need power supply from vbus to make it work, eg mxs-phy, if there is no vbus, USB PHY will not in correct state when the controller starts to work, for host, this requires vbus should be turned on before setting port power(PP) of ehci, to work with this kind of USB PHY design, this patch adds a flag CI_HDRC_TURN_VBUS_EARLY_ON, can be checked by host driver to turn on vbus while start host. Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Some usb PHYs need power supply from vbus to make it work, eg mxs-phy, if
there is no vbus, USB PHY will not in correct state when the controller starts
to work, for host, this requires vbus should be turned on before setting port
power(PP) of ehci, to work with this kind of USB PHY design, this patch adds
a flag CI_HDRC_TURN_VBUS_EARLY_ON, can be checked by host driver to turn on
vbus while start host.

Signed-off-by: Li Jun <jun.li@freescale.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: add runtime power management support 2015-03-18T15:19:08+00:00 Peter Chen peter.chen@freescale.com 2015-02-11T04:44:45+00:00 1f874edcb7318c5dd71025df9f3849715b4e4f71 Add runtime power management support. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add runtime power management support.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER 2014-11-26T17:28:12+00:00 Peter Chen peter.chen@freescale.com 2014-11-26T05:44:31+00:00 947c88592f17bd299ff677049c3cda36cc6f93dd Now, USB PHY is mandatory for chipidea core, the flag CI_HDRC_REQUIRE_TRANSCEIVER is useless. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Now, USB PHY is mandatory for chipidea core, the flag
CI_HDRC_REQUIRE_TRANSCEIVER is useless.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: add support to the generic PHY framework 2014-11-03T16:03:30+00:00 Antoine Tenart antoine.tenart@free-electrons.com 2014-10-30T17:41:19+00:00 1e5e2d3d055436c114e2f16145b83339aed024ff This patch adds support of the PHY framework for ChipIdea drivers. Changes are done in both the ChipIdea common code and in the drivers accessing the PHY. This is done by adding a new PHY member in ChipIdea's structures and by taking care of it in the code. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
This patch adds support of the PHY framework for ChipIdea drivers.
Changes are done in both the ChipIdea common code and in the drivers
accessing the PHY. This is done by adding a new PHY member in
ChipIdea's structures and by taking care of it in the code.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: allow to supply the PHY in the drivers when using HCD 2014-11-03T16:02:50+00:00 Antoine Tenart antoine.tenart@free-electrons.com 2014-10-30T17:41:16+00:00 ef44cb4226d132146e44f8ea562a16b27ff61126 This patch modify the generic code handling PHYs to allow them to be supplied from the drivers. This adds checks to ensure no PHY was already there when looking for one in the generic code. This also makes sure we do not modify its state in the generic HCD functions, it was provided by the driver. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com> 
This patch modify the generic code handling PHYs to allow them to be
supplied from the drivers. This adds checks to ensure no PHY was already
there when looking for one in the generic code. This also makes sure we
do not modify its state in the generic HCD functions, it was provided by
the driver.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: chipidea: add TPL support for targeted hosts 2014-09-24T04:28:41+00:00 Peter Chen peter.chen@freescale.com 2014-08-19T01:51:56+00:00 f6a9ff07832a9d30d457e976e6233b4351cd4cdf For OTG and Embedded hosts, they may need TPL (Targeted Peripheral List) for usb certification and other vender specific requirements, the platform can tell chipidea core driver if it supports tpl through DT or platform data. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
For OTG and Embedded hosts, they may need TPL (Targeted Peripheral List)
for usb certification and other vender specific requirements, the
platform can tell chipidea core driver if it supports tpl through DT
or platform data.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: udc: add maximum-speed = full-speed option 2014-02-25T01:07:52+00:00 Michael Grzeschik m.grzeschik@pengutronix.de 2014-02-19T05:41:43+00:00 4f6743d5ca97ac66831add302cc5467db4ee3809 This patch makes it possible to set the chipidea udc into full-speed only mode. It is set by the oftree property "maximum-speed = full-speed". Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch makes it possible to set the chipidea udc into full-speed only mode.
It is set by the oftree property "maximum-speed = full-speed".

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: add freescale imx28 special write register method 2014-01-13T23:55:19+00:00 Peter Chen peter.chen@freescale.com 2014-01-10T05:51:27+00:00 ed8f8318d2ef3e5f9e4ddf79349508c116b68d7f According to Freescale imx28 Errata, "ENGR119653 USB: ARM to USB register error issue", All USB register write operations must use the ARM SWP instruction. So, we implement special hw_write and hw_test_and_clear for imx28. Discussion for it at below: http://marc.info/?l=linux-usb&m=137996395529294&w=2 This patch is needed for stable tree 3.11+. Cc: stable@vger.kernel.org Cc: robert.hodaszi@digi.com Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
According to Freescale imx28 Errata, "ENGR119653 USB: ARM to USB
register error issue", All USB register write operations must
use the ARM SWP instruction. So, we implement special hw_write
and hw_test_and_clear for imx28.

Discussion for it at below:
http://marc.info/?l=linux-usb&m=137996395529294&w=2

This patch is needed for stable tree 3.11+.

Cc: stable@vger.kernel.org
Cc: robert.hodaszi@digi.com
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: retire flag CI_HDRC_PULLUP_ON_VBUS 2013-08-14T19:37:20+00:00 Peter Chen peter.chen@freescale.com 2013-08-14T09:44:14+00:00 d268e9bc23f5df4a2f4167da246d277c2a468d3d Currently, the controller only runs when the ci->vbus_active is true. So the flag CI_HDRC_PULLUP_ON_VBUS is useless no longer. If the user doesn't have otgsc, he/she needs to change ci_handle_vbus_change to update ci->vbus_active. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Currently, the controller only runs when the ci->vbus_active is true.
So the flag CI_HDRC_PULLUP_ON_VBUS is useless no longer.
If the user doesn't have otgsc, he/she needs to change ci_handle_vbus_change
to update ci->vbus_active.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: add flag CI_HDRC_DUAL_ROLE_NOT_OTG 2013-08-14T19:37:19+00:00 Peter Chen peter.chen@freescale.com 2013-08-14T09:44:08+00:00 577b232fc9caba1b6f7a3bb9901c00b10e0ca1ba Since we need otgsc to know vbus's status at some chipidea controllers even it is peripheral-only mode. Besides, some SoCs (eg, AR9331 SoC) don't have otgsc register even the DCCPARAMS_DC and DCCPARAMS_HC are both 1 at CAP_DCCPARAMS. We inroduce flag CI_HDRC_DUAL_ROLE_NOT_OTG to indicate if the controller is dual role, but not supports OTG. If this flag is not set, we follow the rule that if DCCPARAMS_DC and DCCPARAMS_HC are both 1 at CAP_DCCPARAMS, then this controller is otg capable. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Since we need otgsc to know vbus's status at some chipidea
controllers even it is peripheral-only mode. Besides, some
SoCs (eg, AR9331 SoC) don't have otgsc register even
the DCCPARAMS_DC and DCCPARAMS_HC are both 1 at CAP_DCCPARAMS.

We inroduce flag CI_HDRC_DUAL_ROLE_NOT_OTG to indicate if the
controller is dual role, but not supports OTG. If this flag is
not set, we follow the rule that if DCCPARAMS_DC and DCCPARAMS_HC
are both 1 at CAP_DCCPARAMS, then this controller is otg capable.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>