linux-toradex.git/include/linux/usb, branch master Linux kernel for Apalis and Colibri modules Merge tag 'usb-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2026-10-25T01:31:19+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-10-25T01:31:19+00:00 168151cdb0f93d26557f9f3c7aae659b8d6b1863 Pull USB / Thunderbolt update from Greg KH: "Here is the big set of USB and Thunderbolt changes for 7.4-rc1. Included in here are: - thunderbolt driver updates and fixes - lots of dt schema conversions - usb gadget driver fixes (and a new maintainer!) - usb core fixups with some interactions with the driver core - usb serial updates and fixes for scan-found "issues" - xhci driver updates - typec driver updates - dwc3 driver updates - lots of usb gadget driver fixes for syzbot found "problems" - lots of other small USB driver fixes for randomly reported problems. All of these have been in linux-next with no reported issues" * tag 'usb-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (158 commits) usb: gadget: dummy_hcd: prevent unbind via sysfs usb: gadget: dummy_hcd: add tick_us module parameter for timer-rate tuning usb: gadget: dummy_hcd: set no_sg_constraint only on the SuperSpeed bus usb: gadget: dummy_hcd: fix SuperSpeed ep0 maxpacket usb: gadget: fix refcount underflow in gadgetfs_bind() error path USB: core: document purpose of interface parent reference MAINTAINERS: add Neill Kapron as USB Gadget maintainer USB: Documentation: Update description of completion callback context USB: serial: mxuport: support RS485 mode configuration USB: serial: mxuport: handle SEND_NEXT transmit flow control USB: serial: add generic write control callbacks USB: serial: mxuport: add MUX50U-based device support USB: serial: mxuport: clean up firmware version handling USB: serial: mxuport: clean up product ID definitions and device table USB: serial: sierra: fix urb leak on write completion usb: typec: ucsi_ccg: Add retry mechanism in ccg_read usb: host: xhci-tegra: Add Tegra264 XHCI support usb: host: xhci-tegra: Skip MBOX MSG_ENABLED on Tegra264 dt-bindings: usb: Add Tegra264 XUSB host support usb: xhci-pci: Add TUSB73x0 definitions ... 
Pull USB / Thunderbolt update from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 7.4-rc1.
  Included in here are:

   - thunderbolt driver updates and fixes

   - lots of dt schema conversions

   - usb gadget driver fixes (and a new maintainer!)

   - usb core fixups with some interactions with the driver core

   - usb serial updates and fixes for scan-found "issues"

   - xhci driver updates

   - typec driver updates

   - dwc3 driver updates

   - lots of usb gadget driver fixes for syzbot found "problems"

   - lots of other small USB driver fixes for randomly reported problems.

  All of these have been in linux-next with no reported issues"

* tag 'usb-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (158 commits)
  usb: gadget: dummy_hcd: prevent unbind via sysfs
  usb: gadget: dummy_hcd: add tick_us module parameter for timer-rate tuning
  usb: gadget: dummy_hcd: set no_sg_constraint only on the SuperSpeed bus
  usb: gadget: dummy_hcd: fix SuperSpeed ep0 maxpacket
  usb: gadget: fix refcount underflow in gadgetfs_bind() error path
  USB: core: document purpose of interface parent reference
  MAINTAINERS: add Neill Kapron as USB Gadget maintainer
  USB: Documentation: Update description of completion callback context
  USB: serial: mxuport: support RS485 mode configuration
  USB: serial: mxuport: handle SEND_NEXT transmit flow control
  USB: serial: add generic write control callbacks
  USB: serial: mxuport: add MUX50U-based device support
  USB: serial: mxuport: clean up firmware version handling
  USB: serial: mxuport: clean up product ID definitions and device table
  USB: serial: sierra: fix urb leak on write completion
  usb: typec: ucsi_ccg: Add retry mechanism in ccg_read
  usb: host: xhci-tegra: Add Tegra264 XHCI support
  usb: host: xhci-tegra: Skip MBOX MSG_ENABLED on Tegra264
  dt-bindings: usb: Add Tegra264 XUSB host support
  usb: xhci-pci: Add TUSB73x0 definitions
  ...
Merge tag 'usb-serial-7.4-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next 2026-10-16T16:04:09+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2026-10-16T16:04:09+00:00 893584e7e390c44bf547235749c72f931108a2d7 Johan writes: USB serial updates for 7.4-rc1 Here are the USB serial updates for 7.4-rc1: - fix urb leak on sierra write completion - fix urb leak on usb_wwan disconnect - fix data corruption due to missing mxuport tx throttling - add support for two new classes of mxuport devices - add support for rs485 to mxuport - add new modem device ids - replace the last __get_free_page() with kmalloc() Everything has been in linux-next with no reported issues. The mxuport changes were merged yesterday, but they were contributed by a competent vendor (and passed my smoke test). * tag 'usb-serial-7.4-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: mxuport: support RS485 mode configuration USB: serial: mxuport: handle SEND_NEXT transmit flow control USB: serial: add generic write control callbacks USB: serial: mxuport: add MUX50U-based device support USB: serial: mxuport: clean up firmware version handling USB: serial: mxuport: clean up product ID definitions and device table USB: serial: sierra: fix urb leak on write completion USB: serial: usb_wwan: fix urb leak on disconnect USB: serial: option: add support for ASR 1286:4e3c modem USB: serial: option: add Rolling Wireless RN947R USB: serial: usb_wwan: replace __get_free_page() with kmalloc() 
Johan writes:

USB serial updates for 7.4-rc1

Here are the USB serial updates for 7.4-rc1:

 - fix urb leak on sierra write completion
 - fix urb leak on usb_wwan disconnect
 - fix data corruption due to missing mxuport tx throttling
 - add support for two new classes of mxuport devices
 - add support for rs485 to mxuport
 - add new modem device ids
 - replace the last __get_free_page() with kmalloc()

Everything has been in linux-next with no reported issues. The mxuport
changes were merged yesterday, but they were contributed by a competent
vendor (and passed my smoke test).

* tag 'usb-serial-7.4-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: mxuport: support RS485 mode configuration
  USB: serial: mxuport: handle SEND_NEXT transmit flow control
  USB: serial: add generic write control callbacks
  USB: serial: mxuport: add MUX50U-based device support
  USB: serial: mxuport: clean up firmware version handling
  USB: serial: mxuport: clean up product ID definitions and device table
  USB: serial: sierra: fix urb leak on write completion
  USB: serial: usb_wwan: fix urb leak on disconnect
  USB: serial: option: add support for ASR 1286:4e3c modem
  USB: serial: option: add Rolling Wireless RN947R
  USB: serial: usb_wwan: replace __get_free_page() with kmalloc()
USB: serial: add generic write control callbacks 2026-10-15T09:28:49+00:00 Crescent Hsieh crescentcy.hsieh@moxa.com 2026-08-11T06:04:59+00:00 296ebbfc856e25bf0f10af648b3fe899a381bfce Some USB serial devices use device-specific flow control to determine whether write submission may proceed. The generic write path currently provides no way to pause submission based on driver-specific state. It also provides no way for a driver to restore its state if URB submission fails. Add an optional write_ready() callback to struct usb_serial_driver. Call it with port->lock held after confirming that data is queued and a write URB is available. If the callback returns false, stop write processing and leave the data in the FIFO. The driver must call usb_serial_generic_write_start() when writes may proceed again. Add an optional write_rollback() callback for restoring driver-specific state after usb_submit_urb() fails. Call it with port->lock held after restoring the generic transmit accounting, and pass it the length of the prepared transfer. Drivers which do not provide these callbacks retain the existing generic write behaviour. Signed-off-by: Crescent Hsieh <crescentcy.hsieh@moxa.com> Signed-off-by: Johan Hovold <johan@kernel.org> 
Some USB serial devices use device-specific flow control to determine
whether write submission may proceed. The generic write path currently
provides no way to pause submission based on driver-specific state. It
also provides no way for a driver to restore its state if URB submission
fails.

Add an optional write_ready() callback to struct usb_serial_driver. Call
it with port->lock held after confirming that data is queued and a write
URB is available. If the callback returns false, stop write processing
and leave the data in the FIFO. The driver must call
usb_serial_generic_write_start() when writes may proceed again.

Add an optional write_rollback() callback for restoring driver-specific
state after usb_submit_urb() fails. Call it with port->lock held after
restoring the generic transmit accounting, and pass it the length of the
prepared transfer.

Drivers which do not provide these callbacks retain the existing generic
write behaviour.

Signed-off-by: Crescent Hsieh <crescentcy.hsieh@moxa.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2026-10-09T05:21:56+00:00 Jakub Kicinski kuba@kernel.org 2026-10-09T05:20:04+00:00 d8674294aefef02266c4d47ad10131f1bffbe534 Cross-merge networking fixes after downstream PR (net-7.3-rc7). Conflicts: include/net/strparser.h 0984ebc631792 ("strparser: make sure __strp_recv isn't running before tearing down the parser") 02fd0a2111374 ("net: strparser: removed the aborted bit and aborts counter") https://lore.kernel.org/asYfmLsfy-SCxXjr@sirena.co.uk Adjacent changes: Documentation/networking/strparser.rst 5f193cdabf25 ("docs: networking: strparser: remove general mode") 0984ebc63179 ("strparser: make sure __strp_recv isn't running before tearing down the parser") Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Cross-merge networking fixes after downstream PR (net-7.3-rc7).

Conflicts:

include/net/strparser.h
  0984ebc631792 ("strparser: make sure __strp_recv isn't running before tearing down the parser")
  02fd0a2111374 ("net: strparser: removed the aborted bit and aborts counter")
https://lore.kernel.org/asYfmLsfy-SCxXjr@sirena.co.uk

Adjacent changes:

Documentation/networking/strparser.rst
  5f193cdabf25 ("docs: networking: strparser: remove general mode")
  0984ebc63179 ("strparser: make sure __strp_recv isn't running before tearing down the parser")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rndis_host: enable RX aggregation for OnePlus Nord CE 2 2026-10-08T23:50:11+00:00 Rokas Juras asrokasjuras@gmail.com 2026-10-05T07:48:52+00:00 f688218baa7128a1ef3f8377679fc5fcbc22fa2e USB tethering on the OnePlus Nord CE 2 (IV2201, USB ID 22d9:2766) running Android 13 has download speeds of approximately 2mbps with the default 2048-byte receive limit. The phone's published RNDIS code only enables packet batching when the computer reports a receive limit above 2048 bytes. Testing shows that increasing this limit to 2560 bytes restores normal speeds. Add a quirk for USB device 22d9:2766 to use and advertise a receive buffer of at least 16 KiB. This fits the phone code's default batch of ten packets at a 1500-byte MTU. Tested on 7.3.0-rc5 with the affected phone, including reconnecting USB tethering. Download speeds with the change exceed 100mpbs. Link: https://github.com/OnePlusOSS/android_kernel_oneplus_mt6877/blob/3c1e3d432d0c35afa7fded974b50fa6617219e0f/drivers/usb/gadget/function/f_rndis.c#L538-L551 Link: https://github.com/OnePlusOSS/android_kernel_oneplus_mt6877/blob/3c1e3d432d0c35afa7fded974b50fa6617219e0f/drivers/usb/gadget/function/u_ether.c#L869-L874 Signed-off-by: Rokas Juras <asrokasjuras@gmail.com> Link: https://patch.msgid.link/20261005074852.76818-1-asrokasjuras@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
USB tethering on the OnePlus Nord CE 2 (IV2201, USB ID 22d9:2766)
running Android 13 has download speeds of approximately 2mbps
with the default 2048-byte receive limit.

The phone's published RNDIS code only enables packet batching
when the computer reports a receive limit above 2048 bytes.
Testing shows that increasing this limit to 2560 bytes
restores normal speeds.

Add a quirk for USB device 22d9:2766 to use and advertise a
receive buffer of at least 16 KiB. This fits the phone code's default
batch of ten packets at a 1500-byte MTU.

Tested on 7.3.0-rc5 with the affected phone, including reconnecting
USB tethering. Download speeds with the change exceed 100mpbs.

Link: https://github.com/OnePlusOSS/android_kernel_oneplus_mt6877/blob/3c1e3d432d0c35afa7fded974b50fa6617219e0f/drivers/usb/gadget/function/f_rndis.c#L538-L551
Link: https://github.com/OnePlusOSS/android_kernel_oneplus_mt6877/blob/3c1e3d432d0c35afa7fded974b50fa6617219e0f/drivers/usb/gadget/function/u_ether.c#L869-L874
Signed-off-by: Rokas Juras <asrokasjuras@gmail.com>
Link: https://patch.msgid.link/20261005074852.76818-1-asrokasjuras@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge 7.3-rc6 into usb-next 2026-10-05T05:51:27+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2026-10-05T05:51:27+00:00 5926a7da87895b1e1e1b3789ef364a11cc54d210 We need the usb/thunderbolt fixes in here to work off of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We need the usb/thunderbolt fixes in here to work off of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: set mod_name in driver registration 2026-09-10T12:41:48+00:00 Shashank Balaji shashank.mahadasyam@sony.com 2026-07-22T03:31:23+00:00 07ec27b8821d04f84a471ce4e4b7d62937f8751f The driver core only creates the sysfs "module" symlink for a built-in driver when its struct device_driver has mod_name set (see module_add_driver()). This driver left mod_name unset, so its built-in form had no such symlink. Set mod_name to KBUILD_MODNAME during driver registration. Built-in drivers now gain the symlink, while loadable modules are unaffected. Co-developed-by: Rahul Bukte <rahul.bukte@sony.com> Signed-off-by: Rahul Bukte <rahul.bukte@sony.com> Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Bastien Nocera <hadess@hadess.net> Link: https://patch.msgid.link/20260722-mod_name_usb-v1-3-96d781530f3f@sony.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The driver core only creates the sysfs "module" symlink for a built-in
driver when its struct device_driver has mod_name set (see
module_add_driver()). This driver left mod_name unset, so its built-in
form had no such symlink.

Set mod_name to KBUILD_MODNAME during driver registration. Built-in
drivers now gain the symlink, while loadable modules are unaffected.

Co-developed-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://patch.msgid.link/20260722-mod_name_usb-v1-3-96d781530f3f@sony.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: fix driver deregistration order 2026-09-08T09:00:48+00:00 Johan Hovold johan@kernel.org 2026-08-21T15:45:45+00:00 646e5b28b4fdbc1b828a2398d6ced2c1dd308a46 USB serial driver modules register one driver for the USB bus and one or more drivers for the ports on the USB serial bus. When unloading a driver module, the USB driver must be deregistered before the USB serial bus drivers so that I/O is stopped before unbinding the ports to avoid use-after-free in completion handlers accessing port data. Note that the "new_id" attributes must first be removed to prevent new ids from being added and triggering a probe of the USB driver after it has been deregistered. Fixes: 765e0ba62613 ("usb-serial: new API for driver registration") Cc: stable@vger.kernel.org # 3.4 Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Johan Hovold <johan@kernel.org> 
USB serial driver modules register one driver for the USB bus and one or
more drivers for the ports on the USB serial bus.

When unloading a driver module, the USB driver must be deregistered
before the USB serial bus drivers so that I/O is stopped before
unbinding the ports to avoid use-after-free in completion handlers
accessing port data.

Note that the "new_id" attributes must first be removed to prevent new
ids from being added and triggering a probe of the USB driver after it
has been deregistered.

Fixes: 765e0ba62613 ("usb-serial: new API for driver registration")
Cc: stable@vger.kernel.org	# 3.4
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Merge tag 'usb-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2026-08-25T17:44:46+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-08-25T17:44:46+00:00 f4d50813c0958b7d6bc79a7e0a77193372cbfd03 Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 7.3-rc1. Lots of driver work for new devices and systems, and many other minor fixes and updates. Included in here are: - Thunderbolt subsystem driver updates and additions - typec driver updates and additions - usb gadget fixes all over the place, seems like people are finally paying attention to these drivers for some reason - xhci driver updates and fixes based on lots of reports - usb-serial driver updates and additions - new device ids - other minor USB driver updates and fixes All of these have been in linux-next for a while with no reported issues" * tag 'usb-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (163 commits) usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind() usb: typec: hd3ss3220: fix VBUS regulator error message usb: usbfs: fix use-after-free of usb_device in usbdev_release() usb: gadget: u_audio: Fix use-after-free on sound card disconnect usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition usb: gadget: f_tcm: keep port count until LUN teardown completes usb: usbtest: disable dynamic ID support usb: typec: tcpci: pass correct rx_type to tcpm_pd_receive() USB: c67x00: fix use-after-free in c67x00_add_iso_urb() usb: typec: ucsi: use UCSI_TIMEOUT_MS for sync command completion usb: gadget: snps_udc_plat: clean up PHY on probe deferral usb: gadget: f_tcm: fix deadlock in usbg_make_tpg() usb: dwc2: gadget: Exit partial power down state when changing USB pull-up usb: gadget: f_fs: Fix Use-After-Free in AIO error path usb: gadget: f_fs: Prevent deadlock during ep0 read loop usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed usb: gadget: midi2: remove default configfs groups on teardown usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init() usb: typec: thunderbolt: Disable work before freeing tbt on remove usb: xhci: Handle bogus TRB pointers in Missed Service Error events ... 
Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for 7.3-rc1.

  Lots of driver work for new devices and systems, and many other minor
  fixes and updates. Included in here are:

   - Thunderbolt subsystem driver updates and additions

   - typec driver updates and additions

   - usb gadget fixes all over the place, seems like people are finally
     paying attention to these drivers for some reason

   - xhci driver updates and fixes based on lots of reports

   - usb-serial driver updates and additions

   - new device ids

   - other minor USB driver updates and fixes

  All of these have been in linux-next for a while with no reported issues"

* tag 'usb-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (163 commits)
  usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind()
  usb: typec: hd3ss3220: fix VBUS regulator error message
  usb: usbfs: fix use-after-free of usb_device in usbdev_release()
  usb: gadget: u_audio: Fix use-after-free on sound card disconnect
  usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
  usb: gadget: f_tcm: keep port count until LUN teardown completes
  usb: usbtest: disable dynamic ID support
  usb: typec: tcpci: pass correct rx_type to tcpm_pd_receive()
  USB: c67x00: fix use-after-free in c67x00_add_iso_urb()
  usb: typec: ucsi: use UCSI_TIMEOUT_MS for sync command completion
  usb: gadget: snps_udc_plat: clean up PHY on probe deferral
  usb: gadget: f_tcm: fix deadlock in usbg_make_tpg()
  usb: dwc2: gadget: Exit partial power down state when changing USB pull-up
  usb: gadget: f_fs: Fix Use-After-Free in AIO error path
  usb: gadget: f_fs: Prevent deadlock during ep0 read loop
  usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
  usb: gadget: midi2: remove default configfs groups on teardown
  usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init()
  usb: typec: thunderbolt: Disable work before freeing tbt on remove
  usb: xhci: Handle bogus TRB pointers in Missed Service Error events
  ...
usb: typec: tcpci: pass correct rx_type to tcpm_pd_receive() 2026-08-14T01:49:06+00:00 Xu Yang xu.yang_2@nxp.com 2026-07-23T10:46:14+00:00 b691a07c5f644080374ddd24de6a0e05f5d28744 Previously, tcpci_irq() always passed TCPC_TX_SOP as the receive type to tcpm_pd_receive(), ignoring the actual frame type reported by the TCPC_RX_BUF_FRAME_TYPE register. Cache the TCPC_RX_DETECT register value in rx_type_mask variable. When a PD messageis received, read TCPC_RX_BUF_FRAME_TYPE register and handle the message only if its frame type is enabled in mask. The TCPC_RX_BUF_FRAME_TYPE register records the received message type, which has a 1:1 mapping to enum tcpm_transmit_type. Fixes: fb7ff25ae433 ("usb: typec: tcpm: add discover identity support for SOP'") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://patch.msgid.link/20260723104614.3717623-1-xu.yang_2@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Previously, tcpci_irq() always passed TCPC_TX_SOP as the receive type
to tcpm_pd_receive(), ignoring the actual frame type reported by the
TCPC_RX_BUF_FRAME_TYPE register.

Cache the TCPC_RX_DETECT register value in rx_type_mask variable. When
a PD messageis received, read TCPC_RX_BUF_FRAME_TYPE register and handle
the message only if its frame type is enabled in mask.

The TCPC_RX_BUF_FRAME_TYPE register records the received message type,
which has a 1:1 mapping to enum tcpm_transmit_type.

Fixes: fb7ff25ae433 ("usb: typec: tcpm: add discover identity support for SOP'")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20260723104614.3717623-1-xu.yang_2@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>