The usb/ch9.h will be installed to /usr/include/linux,
and be used from user space.
But le16_to_cpu() is only defined for kernel code.
Without this patch, user space compile will be broken.
Special thanks to Stefan Becker

Reported-by: Stefan Becker <chemobejk@gmail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The way this driver was added by f0ae849 (usb: Add Intel Langwell USB
OTG Transceiver Driver) never even compiled together with langwell_udc,
and that's the only way for it to be useful.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: stable@vger.kernel.org # v2.6.31+
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Alan Cox <alan@linux.intel.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Felipe Balbi <balbi@ti.com>

According to USB 3.0 Specification Table 9-22, if
bmAttributes [4:0] are set to zero, it means "no
streams supported", but the way this helper was
defined on Linux, we will *always* have one stream
which might cause several problems.

For example on DWC3, we would tell the controller
endpoint has streams enabled and yet start transfers
with Stream ID set to 0, which would goof up the host
side.

While doing that, convert the macro to an inline
function due to the different checks we now need.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'for-gadget/next' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (24 commits)
  usb: dwc3: gadget: add support for SG lists
  usb: dwc3: gadget: don't force 'LST' always
  usb: dwc3: gadget: don't return anything on prepare trbs
  usb: dwc3: gadget: re-factor dwc3_prepare_trbs()
  usb: gadget: introduce support for sg lists
  usb: renesas: pipe: convert a long if into a XOR operation
  usb: gadget: remove useless depends on Kconfig
  usb: gadget: s3c-hsudc: remove the_controller global
  usb: gadget: s3c-hsudc: use release_mem_region instead of release_resource
  usb: gadget: s3c-hsudc: Add regulator handling
  usb: gadget: s3c-hsudc: use udc_start and udc_stop functions
  usb: gadget: s3c-hsudc: move device registration to probe
  usb: gadget: s3c-hsudc: add missing otg_put_transceiver in probe
  usb: gadget: s3c-hsudc: add __devinit to probe function
  usb: gadget: s3c-hsudc: move platform_data struct to global header
  USB: EHCI: Add Marvell Host Controller driver
  USB: OTG: add Marvell usb OTG driver support
  usb: gadget: mv_udc: drop ARCH dependency
  usb: gadget: mv_udc: fix bug in ep_dequeue
  usb: gadget: enlarge maxburst bit width.
  ...

Some controllers support scatter/gather transfers
and that might be very useful for some gadget drivers.

This means that we can make use of larger buffer
allocations which means we will have less completion
IRQs overtime, thus improving the perceived performance.

Signed-off-by: Felipe Balbi <balbi@ti.com>

For super speed bulk transfer, the max burst size
is 16, so that 4 bits of maxburst cannot store it.

Signed-off-by: Yu Xu <yuxu@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

* 'for-next/gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (50 commits)
  usb: renesas_usbhs: show error reason on usbhsh_urb_enqueu()
  usb: renesas_usbhs: add force packet remove method
  usb: renesas_usbhs: care usb_hcd_giveback_urb() status
  usb: renesas_usbhs: add usbhsh_is_running()
  usb: renesas_usbhs: disable attch irq after device attached
  usb: renesas_usbhs: care pipe sequence
  usb: renesas_usbhs: add usbhs_pipe_attach() method
  usb: renesas_usbhs: add usbhsh_endpoint_detach_all() for error case
  usb: renesas_usbhs: modify device attach method
  usb: renesas_usbhs: pop packet when urb dequeued
  usb: renesas_usbhs: add lost error value when enqueue
  usb: gadget: mv_udc: replace some debug info
  usb: gadget: mv_udc: refine suspend/resume function
  usb: gadget: mv_udc: refine the clock relative code
  usb: gadget: mv_udc: disable ISR when stopped
  usb: gadget: mv_udc: add otg relative code
  usb: gadget: Use kcalloc instead of kzalloc to allocate array
  usb: renesas_usbhs: remove the_controller_link
  usb: renesas_usbhs: add test-mode support
  usb: renesas_usbhs: call usbhsg_queue_pop() when pipe disable.
  ...

The macro HUB_SET_DEPTH is defined twice in ch11.h (introduced by
commit 0eadcc0 "usb: USB3.0 ch11 definitions" and dbe79bb "USB 3.0
Hub Changes"), so remove the duplicate one in the USB 2.0 part.

Signed-off-by: Qinglin Ye <yestyle@gmail.com>
Cc: John Youn <John.Youn@synopsys.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This commit renames the “speed” field of the usb_gadget_driver
structure to “max_speed”.  This is so that to make it more
apparent that the field represents the maximum speed gadget
driver can support.

This also make the field look more like fields with the same
name in usb_gadget and usb_composite_driver structures.  All
of those represent the *maximal* speed given entity supports.

After this commit, there are the following fields in various
structures:
* usb_gadget::speed - the current connection speed,
* usb_gadget::max_speed - maximal speed UDC supports,
* usb_gadget_driver::max_speed - maximal speed gadget driver
  supports, and
* usb_composite_driver::max_speed - maximal speed composite
  gadget supports.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

This commit replaces usb_gadget's is_dualspeed field with
a max_speed field.

[ balbi@ti.com : Fixed DWC3 driver ]

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>