This commit adds a method that MAC drivers may call in order to find out
the device number of their associated PTP Hardware Clock.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit adds a new ethtool ioctl that exposes the SO_TIMESTAMPING
capabilities of a network interface. In addition, user space programs
can use this ioctl to discover the PTP Hardware Clock (PHC) device
associated with the interface.

Since software receive time stamps are handled by the stack, the generic
ethtool code can answer the query correctly in case the MAC or PHY
drivers lack special time stamping features.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new ethtool operation (get_rxfh_indir_size) to get the
indirectional table size.  Use this to validate the user buffer size
before calling get_rxfh_indir or set_rxfh_indir.  Use get_rxnfc to get
the number of RX rings, and validate the contents of the new
indirection table before calling set_rxfh_indir.  Remove this
validation from drivers.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added platform data struct to define interrupt and reset GPIO. This
allows to initialize the touchscreen controller inside the driver
rather then in each platform and use the driver as a module.

In order to use the auxiliar ADC inputs of STMPE811 devices we need
to add resources for the ADC block. Also move the ADC macros from
the touchscreen driver to the general header file. We will need them
for the ADC driver in future.

export access to the 'Local Shared OS and T_Crit Limit'
register.

The OLPC XO-1.75 laptop includes a SDHCI controller which is 1.8v
capable, and it truthfully reports so in its capabilities. This
alternate voltage is used for driving new "UHS-I" SD cards at their
full speed.

However, what the controller doesn't know is that the motherboard
physically doesn't have a 1.8v supply available.

Add a quirk so that systems such as this one can override disable
1.8v support, adding support for UHS-I cards (by running them at
3.3v).

This avoids a problem where the system would first try to run the
card at 1.8v, fail, and then not be able to fully reset the card
to retry at the normal 3.3v voltage.

This is more appropriate than using the MISSING_CAPS quirk, which
is intended for cases where the SDHCI controller is actually lying
about its capabilities, and would force us to somehow override both
caps words from another source.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Reviewed-by: Philip Rakity <prakity@nvidia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

set some platform_data.

Signed-off-by: Andrew Chew <achew@nvidia.com>

	arch/arm/mach-tegra/common.c
	drivers/ata/ahci-tegra.c

This patch allows for easy integration of a custom Linux boot logo to
replace the Tux' being shown by default.

Use gimp or the like to create a raw PPM in your desired resolution.

Reduce the number of colours in the image to 224:

  user@host:~$ ppmquant 224 Toradex-640x480.ppm > \
    Toradex-640x480-224.ppm
  ppmquant: making histogram...
  ppmquant: 370 colors found
  ppmquant: choosing 224 colors...
  ppmquant: mapping image to new colors...

Convert it from raw PPM to ASCII format:

  user@host:~$ pnmnoraw Toradex-640x480-224.ppm > \
    Toradex-640x480-ascii-224.ppm

Copy it into the Linux sources:

  cp Toradex-640x480-ascii-224.ppm linux-toradex/drivers/video/logo/\
    logo_custom_clut224.ppm

Activate exclusively custom Linux logo in the kernel configuration:

  Device Drivers -> Graphics support -> Bootup logo ->
    Custom 224-color Linux logo

And re-compile the kernel.