linux-toradex.git/include/linux, branch v3.0.18

block: fail SCSI passthrough ioctls on partition devices

2012-01-26T01:24:54+00:00

commit 0bfc96cb77224736dfa35c3c555d37b3646ef35e upstream.

[ Changes with respect to 3.3: return -ENOTTY from scsi_verify_blk_ioctl
  and -ENOIOCTLCMD from sd_compat_ioctl. ]

Linux allows executing the SG_IO ioctl on a partition or LVM volume, and
will pass the command to the underlying block device.  This is
well-known, but it is also a large security problem when (via Unix
permissions, ACLs, SELinux or a combination thereof) a program or user
needs to be granted access only to part of the disk.

This patch lets partitions forward a small set of harmless ioctls;
others are logged with printk so that we can see which ioctls are
actually sent.  In my tests only CDROM_GET_CAPABILITY actually occurred.
Of course it was being sent to a (partition on a) hard disk, so it would
have failed with ENOTTY and the patch isn't changing anything in
practice.  Still, I'm treating it specially to avoid spamming the logs.

In principle, this restriction should include programs running with
CAP_SYS_RAWIO.  If for example I let a program access /dev/sda2 and
/dev/sdb, it still should not be able to read/write outside the
boundaries of /dev/sda2 independent of the capabilities.  However, for
now programs with CAP_SYS_RAWIO will still be allowed to send the
ioctls.  Their actions will still be logged.

This patch does not affect the non-libata IDE driver.  That driver
however already tests for bd != bd->bd_contains before issuing some
ioctl; it could be restricted further to forbid these ioctls even for
programs running with CAP_SYS_ADMIN/CAP_SYS_RAWIO.

Cc: linux-scsi@vger.kernel.org
Cc: Jens Axboe 
Cc: James Bottomley 
Signed-off-by: Paolo Bonzini 
[ Make it also print the command name when warning - Linus ]
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

block: add and use scsi_blk_cmd_ioctl

2012-01-26T01:24:54+00:00

commit 577ebb374c78314ac4617242f509e2f5e7156649 upstream.

Introduce a wrapper around scsi_cmd_ioctl that takes a block device.

The function will then be enhanced to detect partition block devices
and, in that case, subject the ioctls to whitelisting.

Cc: linux-scsi@vger.kernel.org
Cc: Jens Axboe 
Cc: James Bottomley 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

fix shrink_dcache_parent() livelock

2012-01-26T01:24:51+00:00

commit eaf5f9073533cde21c7121c136f1c3f072d9cf59 upstream.

Two (or more) concurrent calls of shrink_dcache_parent() on the same dentry may
cause shrink_dcache_parent() to loop forever.

Here's what appears to happen:

1 - CPU0: select_parent(P) finds C and puts it on dispose list, returns 1

2 - CPU1: select_parent(P) locks P->d_lock

3 - CPU0: shrink_dentry_list() locks C->d_lock
   dentry_kill(C) tries to lock P->d_lock but fails, unlocks C->d_lock

4 - CPU1: select_parent(P) locks C->d_lock,
         moves C from dispose list being processed on CPU0 to the new
dispose list, returns 1

5 - CPU0: shrink_dentry_list() finds dispose list empty, returns

6 - Goto 2 with CPU0 and CPU1 switched

Basically select_parent() steals the dentry from shrink_dentry_list() and thinks
it found a new one, causing shrink_dentry_list() to think it's making progress
and loop over and over.

One way to trigger this is to make udev calls stat() on the sysfs file while it
is going away.

Having a file in /lib/udev/rules.d/ with only this one rule seems to the trick:

ATTR{vendor}=="0x8086", ATTR{device}=="0x10ca", ENV{PCI_SLOT_NAME}="%k", ENV{MATCHADDR}="$attr{address}", RUN+="/bin/true"

Then execute the following loop:

while true; do
        echo -bond0 > /sys/class/net/bonding_masters
        echo +bond0 > /sys/class/net/bonding_masters
        echo -bond1 > /sys/class/net/bonding_masters
        echo +bond1 > /sys/class/net/bonding_masters
done

One fix would be to check all callers and prevent concurrent calls to
shrink_dcache_parent().  But I think a better solution is to stop the
stealing behavior.

This patch adds a new dentry flag that is set when the dentry is added to the
dispose list.  The flag is cleared in dentry_lru_del() in case the dentry gets a
new reference just before being pruned.

If the dentry has this flag, select_parent() will skip it and let
shrink_dentry_list() retry pruning it.  With select_parent() skipping those
dentries there will not be the appearance of progress (new dentries found) when
there is none, hence shrink_dcache_parent() will not loop forever.

Set the flag is also set in prune_dcache_sb() for consistency as suggested by
Linus.

Signed-off-by: Miklos Szeredi 
Signed-off-by: Al Viro 
Signed-off-by: Greg Kroah-Hartman

svcrpc: destroy server sockets all at once

2012-01-26T01:24:48+00:00

commit 2fefb8a09e7ed251ae8996e0c69066e74c5aa560 upstream.

There's no reason I can see that we need to call sv_shutdown between
closing the two lists of sockets.

Signed-off-by: J. Bruce Fields 
Signed-off-by: Greg Kroah-Hartman

V4L/DVB: v4l2-ioctl: integer overflow in video_usercopy()

2012-01-26T01:24:46+00:00

commit 6c06108be53ca5e94d8b0e93883d534dd9079646 upstream.

If ctrls->count is too high the multiplication could overflow and
array_size would be lower than expected.  Mauro and Hans Verkuil
suggested that we cap it at 1024.  That comes from the maximum
number of controls with lots of room for expantion.

$ grep V4L2_CID include/linux/videodev2.h | wc -l
211

Signed-off-by: Dan Carpenter 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

memcg: add mem_cgroup_replace_page_cache() to fix LRU issue

2012-01-26T01:24:43+00:00

commit ab936cbcd02072a34b60d268f94440fd5cf1970b upstream.

Commit ef6a3c6311 ("mm: add replace_page_cache_page() function") added a
function replace_page_cache_page().  This function replaces a page in the
radix-tree with a new page.  WHen doing this, memory cgroup needs to fix
up the accounting information.  memcg need to check PCG_USED bit etc.

In some(many?) cases, 'newpage' is on LRU before calling
replace_page_cache().  So, memcg's LRU accounting information should be
fixed, too.

This patch adds mem_cgroup_replace_page_cache() and removes the old hooks.
 In that function, old pages will be unaccounted without touching
res_counter and new page will be accounted to the memcg (of old page).
WHen overwriting pc->mem_cgroup of newpage, take zone->lru_lock and avoid
races with LRU handling.

Background:
  replace_page_cache_page() is called by FUSE code in its splice() handling.
  Here, 'newpage' is replacing oldpage but this newpage is not a newly allocated
  page and may be on LRU. LRU mis-accounting will be critical for memory cgroup
  because rmdir() checks the whole LRU is empty and there is no account leak.
  If a page is on the other LRU than it should be, rmdir() will fail.

This bug was added in March 2011, but no bug report yet.  I guess there
are not many people who use memcg and FUSE at the same time with upstream
kernels.

The result of this bug is that admin cannot destroy a memcg because of
account leak.  So, no panic, no deadlock.  And, even if an active cgroup
exist, umount can succseed.  So no problem at shutdown.

Signed-off-by: KAMEZAWA Hiroyuki 
Acked-by: Johannes Weiner 
Acked-by: Michal Hocko 
Cc: Miklos Szeredi 
Cc: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

PCI: Fix PCI_EXP_TYPE_RC_EC value

2012-01-26T01:24:38+00:00

commit 1830ea91c20b06608f7cdb2455ce05ba834b3214 upstream.

Spec shows this as 1010b = 0xa

Signed-off-by: Alex Williamson 
Signed-off-by: Jesse Barnes 
Signed-off-by: Greg Kroah-Hartman

usb: ch9: fix up MaxStreams helper

2012-01-12T19:35:33+00:00

commit 18b7ede5f7ee2092aedcb578d3ac30bd5d4fc23c upstream.

[ removed the dwc3 portion of the patch as it didn't apply to
older kernels - gregkh]

According to USB 3.0 Specification Table 9-22, if
bmAttributes [4:0] are set to zero, it means "no
streams supported", but the way this helper was
defined on Linux, we will *always* have one stream
which might cause several problems.

For example on DWC3, we would tell the controller
endpoint has streams enabled and yet start transfers
with Stream ID set to 0, which would goof up the host
side.

While doing that, convert the macro to an inline
function due to the different checks we now need.

Signed-off-by: Felipe Balbi 
Signed-off-by: Sarah Sharp 
Signed-off-by: Greg Kroah-Hartman

usb: fix number of mapped SG DMA entries

2012-01-12T19:35:25+00:00

commit bc677d5b64644c399cd3db6a905453e611f402ab upstream.

Add a new field num_mapped_sgs to struct urb so that we have a place to
store the number of mapped entries and can also retain the original
value of entries in num_sgs.  Previously, usb_hcd_map_urb_for_dma()
would overwrite this with the number of mapped entries, which would
break dma_unmap_sg() because it requires the original number of entries.

This fixes warnings like the following when using USB storage devices:
 ------------[ cut here ]------------
 WARNING: at lib/dma-debug.c:902 check_unmap+0x4e4/0x695()
 ehci_hcd 0000:00:12.2: DMA-API: device driver frees DMA sg list with different entry count [map count=4] [unmap count=1]
 Modules linked in: ohci_hcd ehci_hcd
 Pid: 0, comm: kworker/0:1 Not tainted 3.2.0-rc2+ #319
 Call Trace:
    [] warn_slowpath_common+0x80/0x98
  [] warn_slowpath_fmt+0x41/0x43
  [] check_unmap+0x4e4/0x695
  [] ? trace_hardirqs_off+0xd/0xf
  [] ? _raw_spin_unlock_irqrestore+0x33/0x50
  [] debug_dma_unmap_sg+0xeb/0x117
  [] usb_hcd_unmap_urb_for_dma+0x71/0x188
  [] unmap_urb_for_dma+0x20/0x22
  [] usb_hcd_giveback_urb+0x5d/0xc0
  [] ehci_urb_done+0xf7/0x10c [ehci_hcd]
  [] qh_completions+0x429/0x4bd [ehci_hcd]
  [] ehci_work+0x95/0x9c0 [ehci_hcd]
  ...
 ---[ end trace f29ac88a5a48c580 ]---
 Mapped at:
  [] debug_dma_map_sg+0x45/0x139
  [] usb_hcd_map_urb_for_dma+0x22e/0x478
  [] usb_hcd_submit_urb+0x63f/0x6fa
  [] usb_submit_urb+0x2c7/0x2de
  [] usb_sg_wait+0x55/0x161

Signed-off-by: Clemens Ladisch 
Signed-off-by: Greg Kroah-Hartman

mfd: Turn on the twl4030-madc MADC clock

2012-01-06T22:14:11+00:00

commit 3d6271f92e98094584fd1e609a9969cd33e61122 upstream.

Without turning the MADC clock on, no MADC conversions occur.

$ cat /sys/class/hwmon/hwmon0/device/in8_input
[   53.428436] twl4030_madc twl4030_madc: conversion timeout!
cat: read error: Resource temporarily unavailable

Signed-off-by: Kyle Manna 
Signed-off-by: Samuel Ortiz 
Signed-off-by: Greg Kroah-Hartman