linux-toradex.git/include/linux, branch v3.13.2

mmc: sdhci: add quirk for broken HS200 support

2014-02-06T19:34:08+00:00

commit 13868bf20f2f2c305f96e23620b024e167d6f9cb upstream.

This patch defines a quirk for platforms unable to enable HS200 support.

Signed-off-by: David Cohen 
Reviewed-by: Chuanxiao Dong 
Acked-by: Dong Aisheng 
Signed-off-by: Chris Ball 
Signed-off-by: Greg Kroah-Hartman

libata: disable LPM for some WD SATA-I devices

2014-02-06T19:34:05+00:00

commit ecd75ad514d73efc1bbcc5f10a13566c3ace5f53 upstream.

For some reason, some early WD drives spin up and down drives
erratically when the link is put into slumber mode which can reduce
the life expectancy of the device significantly.  Unfortunately, we
don't have full list of devices and given the nature of the issue it'd
be better to err on the side of false positives than the other way
around.  Let's disable LPM on all WD devices which match one of the
known problematic model prefixes and are SATA-I.

As horkage list doesn't support matching SATA capabilities, this is
implemented as two horkages - WD_BROKEN_LPM and NOLPM.  The former is
set for the known prefixes and sets the latter if the matched device
is SATA-I.

Note that this isn't optimal as this disables all LPM operations and
partial link power state reportedly works fine on these; however, the
way LPM is implemented in libata makes it difficult to precisely map
libata LPM setting to specific link power state.  Well, these devices
are already fairly outdated.  Let's just disable whole LPM for now.

Signed-off-by: Tejun Heo 
Reported-and-tested-by: Nikos Barkas 
Reported-and-tested-by: Ioannis Barkas 
References: https://bugzilla.kernel.org/show_bug.cgi?id=57211
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: add freescale imx28 special write register method

2014-02-06T19:33:51+00:00

commit ed8f8318d2ef3e5f9e4ddf79349508c116b68d7f upstream.

According to Freescale imx28 Errata, "ENGR119653 USB: ARM to USB
register error issue", All USB register write operations must
use the ARM SWP instruction. So, we implement special hw_write
and hw_test_and_clear for imx28.

Discussion for it at below:
http://marc.info/?l=linux-usb&m=137996395529294&w=2

This patch is needed for stable tree 3.11+.

Cc: robert.hodaszi@digi.com
Signed-off-by: Peter Chen 
Signed-off-by: Marc Kleine-Budde 
Tested-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

mm: Make {,set}page_address() static inline if WANT_PAGE_VIRTUAL

2014-01-29T13:06:18+00:00

commit f92f455f67fef27929e6043499414605b0c94872 upstream.

{,set}page_address() are macros if WANT_PAGE_VIRTUAL.  If
!WANT_PAGE_VIRTUAL, they're plain C functions.

If someone calls them with a void *, this pointer is auto-converted to
struct page * if !WANT_PAGE_VIRTUAL, but causes a build failure on
architectures using WANT_PAGE_VIRTUAL (arc, m68k and sparc64):

  drivers/md/bcache/bset.c: In function `__btree_sort':
  drivers/md/bcache/bset.c:1190: warning: dereferencing `void *' pointer
  drivers/md/bcache/bset.c:1190: error: request for member `virtual' in something not a structure or union

Convert them to static inline functions to fix this.  There are already
plenty of users of struct page members inside , so there's
no reason to keep them as macros.

Signed-off-by: Geert Uytterhoeven 
Acked-by: Michael S. Tsirkin 
Tested-by: Guenter Roeck 
Tested-by: David Rientjes 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2014-01-16T01:31:55+00:00

Pull locking fixes from Ingo Molnar:
 "Two fixes from lockdep coverage of seqlocks, which fix deadlocks on
  lockdep-enabled ARM systems"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched_clock: Disable seqlock lockdep usage in sched_clock()
  seqlock: Use raw_ prefix instead of _no_lockdep

Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2014-01-16T01:21:17+00:00

Pull i2c bugfix from Wolfram Sang.

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: Re-instate body of i2c_parent_is_i2c_adapter()

crash_dump: fix compilation error (on MIPS at least)

2014-01-15T07:19:42+00:00

  In file included from kernel/crash_dump.c:2:0:
  include/linux/crash_dump.h:22:27: error: unknown type name `pgprot_t'

when CONFIG_CRASH_DUMP=y

The error was traced back to commit 9cb218131de1 ("vmcore: introduce
remap_oldmem_pfn_range()")

include  to get the missing definition

Signed-off-by: Qais Yousef 
Reviewed-by: James Hogan 
Cc: Michael Holzheu 
Acked-by: Vivek Goyal 
Cc: 	[3.12+]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

i2c: Re-instate body of i2c_parent_is_i2c_adapter()

2014-01-14T16:11:13+00:00

The body of i2c_parent_is_i2c_adapter() is currently guarded by
I2C_MUX. It should be CONFIG_I2C_MUX instead.

Among potentially other problems, this resulted in i2c_lock_adapter()
only locking I2C mux child adapters, and not the parent adapter. In
turn, this could allow inter-mingling of mux child selection and I2C
transactions, which could result in I2C transactions being directed to
the wrong I2C bus, and possibly even switching between busses in the
middle of a transaction.

One concrete issue caused by this bug was corrupted HDMI EDID reads
during boot on the NVIDIA Tegra Seaboard system, although this only
became apparent in recent linux-next, when the boot timing was changed
just enough to trigger the race condition.

Fixes: 3923172b3d70 ("i2c: reduce parent checking to a NOOP in non-I2C_MUX case")
Cc: Phil Carmody 
Cc: 
Signed-off-by: Stephen Warren 
Signed-off-by: Wolfram Sang

seqlock: Use raw_ prefix instead of _no_lockdep

2014-01-12T09:13:59+00:00

Linus disliked the _no_lockdep() naming, so instead
use the more-consistent raw_* prefix to the non-lockdep
enabled seqcount methods.

This also adds raw_ methods for the write operations
as well, which will be utilized in a following patch.

Acked-by: Linus Torvalds 
Reviewed-by: Stephen Boyd 
Signed-off-by: John Stultz 
Signed-off-by: Peter Zijlstra 
Cc: Krzysztof Hałasa 
Cc: Uwe Kleine-König 
Cc: Willy Tarreau 
Link: http://lkml.kernel.org/r/1388704274-5278-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar

net: core: explicitly select a txq before doing l2 forwarding

2014-01-10T18:23:08+00:00

Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The
will cause several issues:

- NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan
  instead of lower device which misses the necessary txq synchronization for
  lower device such as txq stopping or frozen required by dev watchdog or
  control path.
- dev_hard_start_xmit() was called with NULL txq which bypasses the net device
  watchdog.
- dev_hard_start_xmit() does not check txq everywhere which will lead a crash
  when tso is disabled for lower device.

Fix this by explicitly introducing a new param for .ndo_select_queue() for just
selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also
extended to accept this parameter and dev_queue_xmit_accel() was used to do l2
forwarding transmission.

With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need
to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep
a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of
dev_queue_xmit() to do the transmission.

In the future, it was also required for macvtap l2 forwarding support since it
provides a necessary synchronization method.

Cc: John Fastabend 
Cc: Neil Horman 
Cc: e1000-devel@lists.sourceforge.net
Signed-off-by: Jason Wang 
Acked-by: Neil Horman 
Acked-by: John Fastabend 
Signed-off-by: David S. Miller