linux-toradex.git/include/linux, branch v3.2.26

block: add blk_queue_dead()

2012-08-02T13:37:54+00:00

commit 34f6055c80285e4efb3f602a9119db75239744dc upstream.

There are a number of QUEUE_FLAG_DEAD tests.  Add blk_queue_dead()
macro and use it.

This patch doesn't introduce any functional difference.

Signed-off-by: Tejun Heo 
Signed-off-by: Jens Axboe 
Signed-off-by: Ben Hutchings

workqueue: perform cpu down operations from low priority cpu_notifier()

2012-08-02T13:37:51+00:00

commit 6575820221f7a4dd6eadecf7bf83cdd154335eda upstream.

Currently, all workqueue cpu hotplug operations run off
CPU_PRI_WORKQUEUE which is higher than normal notifiers.  This is to
ensure that workqueue is up and running while bringing up a CPU before
other notifiers try to use workqueue on the CPU.

Per-cpu workqueues are supposed to remain working and bound to the CPU
for normal CPU_DOWN_PREPARE notifiers.  This holds mostly true even
with workqueue offlining running with higher priority because
workqueue CPU_DOWN_PREPARE only creates a bound trustee thread which
runs the per-cpu workqueue without concurrency management without
explicitly detaching the existing workers.

However, if the trustee needs to create new workers, it creates
unbound workers which may wander off to other CPUs while
CPU_DOWN_PREPARE notifiers are in progress.  Furthermore, if the CPU
down is cancelled, the per-CPU workqueue may end up with workers which
aren't bound to the CPU.

While reliably reproducible with a convoluted artificial test-case
involving scheduling and flushing CPU burning work items from CPU down
notifiers, this isn't very likely to happen in the wild, and, even
when it happens, the effects are likely to be hidden by the following
successful CPU down.

Fix it by using different priorities for up and down notifiers - high
priority for up operations and low priority for down operations.

Workqueue cpu hotplug operations will soon go through further cleanup.

Signed-off-by: Tejun Heo 
Acked-by: "Rafael J. Wysocki" 
Signed-off-by: Ben Hutchings

sched/nohz: Fix rq->cpu_load calculations some more

2012-08-02T13:37:38+00:00

commit 5aaa0b7a2ed5b12692c9ffb5222182bd558d3146 upstream.

Follow up on commit 556061b00 ("sched/nohz: Fix rq->cpu_load[]
calculations") since while that fixed the busy case it regressed the
mostly idle case.

Add a callback from the nohz exit to also age the rq->cpu_load[]
array. This closes the hole where either there was no nohz load
balance pass during the nohz, or there was a 'significant' amount of
idle time between the last nohz balance and the nohz exit.

So we'll update unconditionally from the tick to not insert any
accidental 0 load periods while busy, and we try and catch up from
nohz idle balance and nohz exit. Both these are still prone to missing
a jiffy, but that has always been the case.

Signed-off-by: Peter Zijlstra 
Cc: pjt@google.com
Cc: Venkatesh Pallipadi 
Link: http://lkml.kernel.org/n/tip-kt0trz0apodbf84ucjfdbr1a@git.kernel.org
Signed-off-by: Ingo Molnar 
[bwh: Backported to 3.2: adjust filenames and context]
Signed-off-by: Ben Hutchings

cpuset: mm: reduce large amounts of memory barrier related damage v3

2012-08-02T13:37:36+00:00

commit cc9a6c8776615f9c194ccf0b63a0aa5628235545 upstream.

Stable note:  Not tracked in Bugzilla. [get|put]_mems_allowed() is extremely
	expensive and severely impacted page allocator performance. This
	is part of a series of patches that reduce page allocator overhead.

Commit c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when
changing cpuset's mems") wins a super prize for the largest number of
memory barriers entered into fast paths for one commit.

[get|put]_mems_allowed is incredibly heavy with pairs of full memory
barriers inserted into a number of hot paths.  This was detected while
investigating at large page allocator slowdown introduced some time
after 2.6.32.  The largest portion of this overhead was shown by
oprofile to be at an mfence introduced by this commit into the page
allocator hot path.

For extra style points, the commit introduced the use of yield() in an
implementation of what looks like a spinning mutex.

This patch replaces the full memory barriers on both read and write
sides with a sequence counter with just read barriers on the fast path
side.  This is much cheaper on some architectures, including x86.  The
main bulk of the patch is the retry logic if the nodemask changes in a
manner that can cause a false failure.

While updating the nodemask, a check is made to see if a false failure
is a risk.  If it is, the sequence number gets bumped and parallel
allocators will briefly stall while the nodemask update takes place.

In a page fault test microbenchmark, oprofile samples from
__alloc_pages_nodemask went from 4.53% of all samples to 1.15%.  The
actual results were

                             3.3.0-rc3          3.3.0-rc3
                             rc3-vanilla        nobarrier-v2r1
    Clients   1 UserTime       0.07 (  0.00%)   0.08 (-14.19%)
    Clients   2 UserTime       0.07 (  0.00%)   0.07 (  2.72%)
    Clients   4 UserTime       0.08 (  0.00%)   0.07 (  3.29%)
    Clients   1 SysTime        0.70 (  0.00%)   0.65 (  6.65%)
    Clients   2 SysTime        0.85 (  0.00%)   0.82 (  3.65%)
    Clients   4 SysTime        1.41 (  0.00%)   1.41 (  0.32%)
    Clients   1 WallTime       0.77 (  0.00%)   0.74 (  4.19%)
    Clients   2 WallTime       0.47 (  0.00%)   0.45 (  3.73%)
    Clients   4 WallTime       0.38 (  0.00%)   0.37 (  1.58%)
    Clients   1 Flt/sec/cpu  497620.28 (  0.00%) 520294.53 (  4.56%)
    Clients   2 Flt/sec/cpu  414639.05 (  0.00%) 429882.01 (  3.68%)
    Clients   4 Flt/sec/cpu  257959.16 (  0.00%) 258761.48 (  0.31%)
    Clients   1 Flt/sec      495161.39 (  0.00%) 517292.87 (  4.47%)
    Clients   2 Flt/sec      820325.95 (  0.00%) 850289.77 (  3.65%)
    Clients   4 Flt/sec      1020068.93 (  0.00%) 1022674.06 (  0.26%)
    MMTests Statistics: duration
    Sys Time Running Test (seconds)             135.68    132.17
    User+Sys Time Running Test (seconds)         164.2    160.13
    Total Elapsed Time (seconds)                123.46    120.87

The overall improvement is small but the System CPU time is much
improved and roughly in correlation to what oprofile reported (these
performance figures are without profiling so skew is expected).  The
actual number of page faults is noticeably improved.

For benchmarks like kernel builds, the overall benefit is marginal but
the system CPU time is slightly reduced.

To test the actual bug the commit fixed I opened two terminals.  The
first ran within a cpuset and continually ran a small program that
faulted 100M of anonymous data.  In a second window, the nodemask of the
cpuset was continually randomised in a loop.

Without the commit, the program would fail every so often (usually
within 10 seconds) and obviously with the commit everything worked fine.
With this patch applied, it also worked fine so the fix should be
functionally equivalent.

Signed-off-by: Mel Gorman 
Cc: Miao Xie 
Cc: David Rientjes 
Cc: Peter Zijlstra 
Cc: Christoph Lameter 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Mel Gorman 
[bwh: Forward-ported from 3.0 to 3.2: apply the upstream changes
 to get_any_partial()]
Signed-off-by: Ben Hutchings

mm: compaction: introduce sync-light migration for use by compaction

2012-08-02T13:37:32+00:00

commit a6bc32b899223a877f595ef9ddc1e89ead5072b8 upstream.

Stable note: Not tracked in Buzilla. This was part of a series that
	reduced interactivity stalls experienced when THP was enabled.
	These stalls were particularly noticable when copying data
	to a USB stick but the experiences for users varied a lot.

This patch adds a lightweight sync migrate operation MIGRATE_SYNC_LIGHT
mode that avoids writing back pages to backing storage.  Async compaction
maps to MIGRATE_ASYNC while sync compaction maps to MIGRATE_SYNC_LIGHT.
For other migrate_pages users such as memory hotplug, MIGRATE_SYNC is
used.

This avoids sync compaction stalling for an excessive length of time,
particularly when copying files to a USB stick where there might be a
large number of dirty pages backed by a filesystem that does not support
->writepages.

[aarcange@redhat.com: This patch is heavily based on Andrea's work]
[akpm@linux-foundation.org: fix fs/nfs/write.c build]
[akpm@linux-foundation.org: fix fs/btrfs/disk-io.c build]
Signed-off-by: Mel Gorman 
Reviewed-by: Rik van Riel 
Cc: Andrea Arcangeli 
Cc: Minchan Kim 
Cc: Dave Jones 
Cc: Jan Kara 
Cc: Andy Isaacson 
Cc: Nai Xia 
Cc: Johannes Weiner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings

mm: compaction: make isolate_lru_page() filter-aware again

2012-08-02T13:37:31+00:00

commit c82449352854ff09e43062246af86bdeb628f0c3 upstream.

Stable note: Not tracked in Bugzilla. A fix aimed at preserving page aging
	information by reducing LRU list churning had the side-effect of
	reducing THP allocation success rates. This was part of a series
	to restore the success rates while preserving the reclaim fix.

Commit 39deaf85 ("mm: compaction: make isolate_lru_page() filter-aware")
noted that compaction does not migrate dirty or writeback pages and that
is was meaningless to pick the page and re-add it to the LRU list.  This
had to be partially reverted because some dirty pages can be migrated by
compaction without blocking.

This patch updates "mm: compaction: make isolate_lru_page" by skipping
over pages that migration has no possibility of migrating to minimise LRU
disruption.

Signed-off-by: Mel Gorman 
Reviewed-by: Rik van Riel
Cc: Andrea Arcangeli 
Reviewed-by: Minchan Kim 
Cc: Dave Jones 
Cc: Jan Kara 
Cc: Andy Isaacson 
Cc: Nai Xia 
Cc: Johannes Weiner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings

mm: compaction: determine if dirty pages can be migrated without blocking within ->migratepage

2012-08-02T13:37:30+00:00

commit b969c4ab9f182a6e1b2a0848be349f99714947b0 upstream.

Stable note: Not tracked in Bugzilla. A fix aimed at preserving page
	aging information by reducing LRU list churning had the side-effect
	of reducing THP allocation success rates. This was part of a series
	to restore the success rates while preserving the reclaim fix.

Asynchronous compaction is used when allocating transparent hugepages to
avoid blocking for long periods of time.  Due to reports of stalling,
there was a debate on disabling synchronous compaction but this severely
impacted allocation success rates.  Part of the reason was that many dirty
pages are skipped in asynchronous compaction by the following check;

	if (PageDirty(page) && !sync &&
		mapping->a_ops->migratepage != migrate_page)
			rc = -EBUSY;

This skips over all mapping aops using buffer_migrate_page() even though
it is possible to migrate some of these pages without blocking.  This
patch updates the ->migratepage callback with a "sync" parameter.  It is
the responsibility of the callback to fail gracefully if migration would
block.

Signed-off-by: Mel Gorman 
Reviewed-by: Rik van Riel 
Cc: Andrea Arcangeli 
Cc: Minchan Kim 
Cc: Dave Jones 
Cc: Jan Kara 
Cc: Andy Isaacson 
Cc: Nai Xia 
Cc: Johannes Weiner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings

net: remove skb_orphan_try()

2012-07-25T03:11:40+00:00

commit 62b1a8ab9b3660bb820d8dfe23148ed6cda38574 upstream.

Orphaning skb in dev_hard_start_xmit() makes bonding behavior
unfriendly for applications sending big UDP bursts : Once packets
pass the bonding device and come to real device, they might hit a full
qdisc and be dropped. Without orphaning, the sender is automatically
throttled because sk->sk_wmemalloc reaches sk->sk_sndbuf (assuming
sk_sndbuf is not too big)

We could try to defer the orphaning adding another test in
dev_hard_start_xmit(), but all this seems of little gain,
now that BQL tends to make packets more likely to be parked
in Qdisc queues instead of NIC TX ring, in cases where performance
matters.

Reverts commits :
fc6055a5ba31 net: Introduce skb_orphan_try()
87fd308cfc6b net: skb_tx_hash() fix relative to skb_orphan_try()
and removes SKBTX_DRV_NEEDS_SK_REF flag

Reported-and-bisected-by: Jean-Michel Hautbois 
Signed-off-by: Eric Dumazet 
Tested-by: Oliver Hartkopp 
Acked-by: Oliver Hartkopp 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2:
 - Adjust context
 - SKBTX_WIFI_STATUS is not defined]
Signed-off-by: Ben Hutchings

timekeeping: Provide hrtimer update function

2012-07-25T03:11:36+00:00

This is a backport of f6c06abfb3972ad4914cef57d8348fcb2932bc3b

To finally fix the infamous leap second issue and other race windows
caused by functions which change the offsets between the various time
bases (CLOCK_MONOTONIC, CLOCK_REALTIME and CLOCK_BOOTTIME) we need a
function which atomically gets the current monotonic time and updates
the offsets of CLOCK_REALTIME and CLOCK_BOOTTIME with minimalistic
overhead. The previous patch which provides ktime_t offsets allows us
to make this function almost as cheap as ktime_get() which is going to
be replaced in hrtimer_interrupt().

Signed-off-by: Thomas Gleixner 
Reviewed-by: Ingo Molnar 
Acked-by: Peter Zijlstra 
Acked-by: Prarit Bhargava 
Signed-off-by: John Stultz 
Link: http://lkml.kernel.org/r/1341960205-56738-7-git-send-email-johnstul@us.ibm.com
Signed-off-by: Thomas Gleixner 
[John Stultz: Backported to 3.2]
Cc: Prarit Bhargava 
Cc: Thomas Gleixner 
Cc: Linux Kernel 
Signed-off-by: John Stultz 
Signed-off-by: Ben Hutchings

hrtimer: Provide clock_was_set_delayed()

2012-07-25T03:11:34+00:00

commit f55a6faa384304c89cfef162768e88374d3312cb upstream.

clock_was_set() cannot be called from hard interrupt context because
it calls on_each_cpu().

For fixing the widely reported leap seconds issue it is necessary to
call it from hard interrupt context, i.e. the timer tick code, which
does the timekeeping updates.

Provide a new function which denotes it in the hrtimer cpu base
structure of the cpu on which it is called and raise the hrtimer
softirq. We then execute the clock_was_set() notificiation from
softirq context in run_hrtimer_softirq(). The hrtimer softirq is
rarely used, so polling the flag there is not a performance issue.

[ tglx: Made it depend on CONFIG_HIGH_RES_TIMERS. We really should get
  rid of all this ifdeffery ASAP ]

Signed-off-by: John Stultz 
Reported-by: Jan Engelhardt 
Reviewed-by: Ingo Molnar 
Acked-by: Peter Zijlstra 
Acked-by: Prarit Bhargava 
Link: http://lkml.kernel.org/r/1341960205-56738-2-git-send-email-johnstul@us.ibm.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Ben Hutchings