linux-toradex.git/include/linux, branch v3.2.73

skbuff: Fix skb checksum partial check.

2015-11-17T15:54:46+00:00

[ Upstream commit 31b33dfb0a144469dd805514c9e63f4993729a48 ]

Earlier patch 6ae459bda tried to detect void ckecksum partial
skb by comparing pull length to checksum offset. But it does
not work for all cases since checksum-offset depends on
updates to skb->data.

Following patch fixes it by validating checksum start offset
after skb-data pointer is updated. Negative value of checksum
offset start means there is no need to checksum.

Fixes: 6ae459bda ("skbuff: Fix skb checksum flag on skb pull")
Reported-by: Andrew Vagin 
Signed-off-by: Pravin B Shelar 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

skbuff: Fix skb checksum flag on skb pull

2015-11-17T15:54:46+00:00

[ Upstream commit 6ae459bdaaeebc632b16e54dcbabb490c6931d61 ]

VXLAN device can receive skb with checksum partial. But the checksum
offset could be in outer header which is pulled on receive. This results
in negative checksum offset for the skb. Such skb can cause the assert
failure in skb_checksum_help(). Following patch fixes the bug by setting
checksum-none while pulling outer header.

Following is the kernel panic msg from old kernel hitting the bug.

------------[ cut here ]------------
kernel BUG at net/core/dev.c:1906!
RIP: 0010:[] skb_checksum_help+0x144/0x150
Call Trace:

[] queue_userspace_packet+0x408/0x470 [openvswitch]
[] ovs_dp_upcall+0x5d/0x60 [openvswitch]
[] ovs_dp_process_packet_with_key+0xe6/0x100 [openvswitch]
[] ovs_dp_process_received_packet+0x4b/0x80 [openvswitch]
[] ovs_vport_receive+0x2a/0x30 [openvswitch]
[] vxlan_rcv+0x53/0x60 [openvswitch]
[] vxlan_udp_encap_recv+0x8b/0xf0 [openvswitch]
[] udp_queue_rcv_skb+0x2dc/0x3b0
[] __udp4_lib_rcv+0x1cf/0x6c0
[] udp_rcv+0x1a/0x20
[] ip_local_deliver_finish+0xdd/0x280
[] ip_local_deliver+0x88/0x90
[] ip_rcv_finish+0x10d/0x370
[] ip_rcv+0x235/0x300
[] __netif_receive_skb+0x55d/0x620
[] netif_receive_skb+0x80/0x90
[] virtnet_poll+0x555/0x6f0
[] net_rx_action+0x134/0x290
[] __do_softirq+0xa8/0x210
[] call_softirq+0x1c/0x30
[] do_softirq+0x65/0xa0
[] irq_exit+0x8e/0xb0
[] do_IRQ+0x63/0xe0
[] common_interrupt+0x6e/0x6e

Reported-by: Anupam Chanda 
Signed-off-by: Pravin B Shelar 
Acked-by: Tom Herbert 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

net: add length argument to skb_copy_and_csum_datagram_iovec

2015-11-17T15:54:45+00:00

Without this length argument, we can read past the end of the iovec in
memcpy_toiovec because we have no way of knowing the total length of the
iovec's buffers.

This is needed for stable kernels where 89c22d8c3b27 ("net: Fix skb
csum races when peeking") has been backported but that don't have the
ioviter conversion, which is almost all the stable trees <= 3.18.

This also fixes a kernel crash for NFS servers when the client uses
 -onfsvers=3,proto=udp to mount the export.

Signed-off-by: Sabrina Dubroca 
Reviewed-by: Hannes Frederic Sowa 
[bwh: Backported to 3.2: adjust context in include/linux/skbuff.h]
Signed-off-by: Ben Hutchings

sched: declare pid_alive as inline

2015-11-17T15:54:45+00:00

commit 80e0b6e8a001361316a2d62b748fe677ec46b860 upstream.

We accidentally declared pid_alive without any extern/inline connotation.
Some platforms were fine with this, some like ia64 and mips were very angry.
If the function is inline, the prototype should be inline!

on ia64:
include/linux/sched.h:1718: warning: 'pid_alive' declared inline after
being called

Signed-off-by: Richard Guy Briggs 
Signed-off-by: Eric Paris 
Signed-off-by: Ben Hutchings 
Cc: Neal Gompa

jbd2: avoid infinite loop when destroying aborted journal

2015-10-13T02:46:13+00:00

commit 841df7df196237ea63233f0f9eaa41db53afd70f upstream.

Commit 6f6a6fda2945 "jbd2: fix ocfs2 corrupt when updating journal
superblock fails" changed jbd2_cleanup_journal_tail() to return EIO
when the journal is aborted. That makes logic in
jbd2_log_do_checkpoint() bail out which is fine, except that
jbd2_journal_destroy() expects jbd2_log_do_checkpoint() to always make
a progress in cleaning the journal. Without it jbd2_journal_destroy()
just loops in an infinite loop.

Fix jbd2_journal_destroy() to cleanup journal checkpoint lists of
jbd2_log_do_checkpoint() fails with error.

Reported-by: Eryu Guan 
Tested-by: Eryu Guan 
Fixes: 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a
Signed-off-by: Jan Kara 
Signed-off-by: Theodore Ts'o 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings 
Cc: Roland Dreier

fs: create and use seq_show_option for escaping

2015-10-13T02:46:08+00:00

commit a068acf2ee77693e0bf39d6e07139ba704f461c3 upstream.

Many file systems that implement the show_options hook fail to correctly
escape their output which could lead to unescaped characters (e.g.  new
lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files.  This
could lead to confusion, spoofed entries (resulting in things like
systemd issuing false d-bus "mount" notifications), and who knows what
else.  This looks like it would only be the root user stepping on
themselves, but it's possible weird things could happen in containers or
in other situations with delegated mount privileges.

Here's an example using overlay with setuid fusermount trusting the
contents of /proc/mounts (via the /etc/mtab symlink).  Imagine the use
of "sudo" is something more sneaky:

  $ BASE="ovl"
  $ MNT="$BASE/mnt"
  $ LOW="$BASE/lower"
  $ UP="$BASE/upper"
  $ WORK="$BASE/work/ 0 0
  none /proc fuse.pwn user_id=1000"
  $ mkdir -p "$LOW" "$UP" "$WORK"
  $ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt
  $ cat /proc/mounts
  none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0
  none /proc fuse.pwn user_id=1000 0 0
  $ fusermount -u /proc
  $ cat /proc/mounts
  cat: /proc/mounts: No such file or directory

This fixes the problem by adding new seq_show_option and
seq_show_option_n helpers, and updating the vulnerable show_option
handlers to use them as needed.  Some, like SELinux, need to be open
coded due to unusual existing escape mechanisms.

[akpm@linux-foundation.org: add lost chunk, per Kees]
[keescook@chromium.org: seq_show_option should be using const parameters]
Signed-off-by: Kees Cook 
Acked-by: Serge Hallyn 
Acked-by: Jan Kara 
Acked-by: Paul Moore 
Cc: J. R. Okajima 
Signed-off-by: Kees Cook 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
[bwh: Backported to 3.2:
 - Drop changes to overlayfs, reiserfs
 - Drop vers option from cifs
 - ceph changes are all in one file
 - Adjust context]
Signed-off-by: Ben Hutchings

drivers: usb: fsl: Workaround for USB erratum-A005275

2015-10-13T02:46:05+00:00

commit f8786a91548df6930643a052e40e5c0b7a8403a5 upstream.

Incoming packets in high speed are randomly corrupted by h/w
resulting in multiple errors. This workaround makes FS as
default mode in all affected socs by disabling HS chirp
signalling.This errata does not affect FS and LS mode.

Forces all HS devices to connect in FS mode for all socs
affected by this erratum:
P3041 and P2041 rev 1.0 and 1.1
P5020 and P5010 rev 1.0 and 2.0
P5040, P1010 and T4240 rev 1.0

Signed-off-by: Ramneek Mehresh 
Signed-off-by: Nikhil Badola 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

PCI: Add dev_flags bit to access VPD through function 0

2015-10-13T02:46:04+00:00

commit 932c435caba8a2ce473a91753bad0173269ef334 upstream.

Add a dev_flags bit, PCI_DEV_FLAGS_VPD_REF_F0, to access VPD through
function 0 to provide VPD access on other functions.  This is for hardware
devices that provide copies of the same VPD capability registers in
multiple functions.  Because the kernel expects that each function has its
own registers, both the locking and the state tracking are affected by VPD
accesses to different functions.

On such devices for example, if a VPD write is performed on function 0,
*any* later attempt to read VPD from any other function of that device will
hang.  This has to do with how the kernel tracks the expected value of the
F bit per function.

Concurrent accesses to different functions of the same device can not only
hang but also corrupt both read and write VPD data.

When hangs occur, typically the error message:

  vpd r/w failed.  This is likely a firmware bug on this device.

will be seen.

Never set this bit on function 0 or there will be an infinite recursion.

Signed-off-by: Mark Rustad 
Signed-off-by: Bjorn Helgaas 
Acked-by: Alexander Duyck 
Signed-off-by: Ben Hutchings

libata: add ATA_HORKAGE_NOTRIM

2015-08-12T14:33:21+00:00

commit 71d126fd28de2d4d9b7b2088dbccd7ca62fad6e0 upstream.

Some devices lose data on TRIM whether queued or not.  This patch adds
a horkage to disable TRIM.

tj: Collapsed unnecessary if() nesting.

Signed-off-by: Arne Fitzenreiter 
Signed-off-by: Tejun Heo 
[bwh: Backported to 3.2:
 - Adjust context
 - Drop change to show_ata_dev_trim()]
Signed-off-by: Ben Hutchings

bufferhead: Add _gfp version for sb_getblk()

2015-08-12T14:33:19+00:00

commit bd7ade3cd9b0850264306f5c2b79024a417b6396 upstream.

sb_getblk() is used during ext4 (and possibly other FSes) writeback
paths. Sometimes such path require allocating memory and guaranteeing
that such allocation won't block. Currently, however, there is no way
to provide user flags for sb_getblk which could lead to deadlocks.

This patch implements a sb_getblk_gfp with the only difference it can
accept user-provided GFP flags.

Signed-off-by: Nikolay Borisov 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Ben Hutchings