linux-toradex.git/include/media/rc-map.h, branch v3.2.42

[media] ati_remote: add support for SnapStream Firefly remote

2011-09-22T13:54:40+00:00

The protocol differs by having two toggle bits in the scancode. Since
one of the bits is otherwise unused, we can safely handle the bits
unconditionally.

[mchehab@redhat.com: Fix some bad whitespacing]
Signed-off-by: Anssi Hannula 
Signed-off-by: Mauro Carvalho Chehab

[media] ati_remote: add keymap for Medion X10 RF remote

2011-09-22T13:53:18+00:00

Signed-off-by: Mauro Carvalho Chehab

[media] ati_remote: migrate to the rc subsystem

2011-09-22T13:51:31+00:00

The keycode mangling algorithm is kept the same, so the new external
keymap has the same values as the old static table.

[mchehab@redhat.com: Fix some bad whitespacing]
Signed-off-by: Anssi Hannula 
Signed-off-by: Mauro Carvalho Chehab

[media] rc-core support for Microsoft IR keyboard/mouse

2011-07-27T20:55:59+00:00

This is a custom IR protocol decoder, for the RC-6-ish protocol used by
the Microsoft Remote Keyboard, apparently developed internally at
Microsoft, and officially dubbed MCIR-2, per their March 2011 remote and
transceiver requirements and specifications document, which also touches
on this IR keyboard/mouse device.

Its a standard keyboard with embedded thumb stick mouse pointer and
mouse buttons, along with a number of media keys. The media keys are
standard RC-6, identical to the signals from the stock MCE remotes, and
will be handled as such. The keyboard and mouse signals will be decoded
and delivered to the system by an input device registered specifically
by this driver.

Successfully tested with multiple mceusb-driven transceivers, as well as
with fintek-cir and redrat3 hardware. Essentially, any raw IR hardware
with enough sampling resolution should be able to use this decoder,
nothing about it is at all receiver-hardware-specific.

This work is inspired by lirc_mod_mce:

The documentation there and code aided in understanding and decoding the
protocol, but the bulk of the code is actually borrowed more from the
existing in-kernel decoders than anything. I did recycle the keyboard
keycode table, a few defines, and some of the keyboard and mouse data
parsing bits from lirc_mod_mce though.

Special thanks to James Meyer for providing the hardware, and being
patient with me as I took forever to get around to writing this.

callback routine to ensure we don't get any stuck keys, and used
symbolic names for the keytable. Also cc'ing Florian this time, who I
believe is the original mod-mce author...

CC: Florian Demski 
Signed-off-by: Jarod Wilson 
Signed-off-by: Mauro Carvalho Chehab

[media] rc: add tivo/nero liquidtv keymap

2011-05-20T12:27:29+00:00

Signed-off-by: Jarod Wilson 
Signed-off-by: Mauro Carvalho Chehab

[media] rc/keymaps: Rename Hauppauge table as rc-hauppauge

2011-03-22T22:24:14+00:00

There are two "hauppauge-new" keymaps, one with protocol
unknown, and the other with the protocol marked accordingly.
However, both tables are miss-named.

Also, the old rc-hauppauge-new is broken, as it mixes
three different controllers as if they were just one.

This patch solves half of the problem by renaming the
correct keycode table as just rc-hauppauge. This table
contains the codes for the four different types of
remote controllers found on Hauppauge cards, properly
mapped with their different addresses.

 create mode 100644 drivers/media/rc/keymaps/rc-hauppauge.c
 delete mode 100644 drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
[Jarod: fix up RC_MAP_HAUPPAUGE defines]

Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Jarod Wilson

[media] add TerraTec remote

2011-03-22T07:54:55+00:00

Remote used for TerraTec Cinergy T Stick RC.
Keytable from Martin Groszhauser 

Signed-off-by: Antti Palosaari 
Cc: Martin Groszhauser 
Cc: TerraTux 
Signed-off-by: Mauro Carvalho Chehab

[media] technisat-usb2: added driver for Technisat's USB2.0 DVB-S/S2 receiver

2011-03-21T23:31:33+00:00

This patch is adding support for Technisat's new USB2.0 DVB-S/S2 receiver
device. The development was sponsored by Technisat.

The Green led is toggle depending on the frontend-state. The Red LED is turned
on all the time.

The MAC address reading from the EEPROM along with the
LRC-method to check whether its valid.

Support for the IR-receiver of the Technisat USB2 box. The keys of
small, black remote-control are built-in, repeated key behaviour are
simulated.

The i2c-mutex of the dvb-usb-structure is used as a general mutex for
USB requests, as there are 3 threads racing for atomic requests
consisting of multiple usb-requests.

A module option is there which disables the toggling of LEDs by the
driver on certain triggers. Useful when being used in a "dark"
environment.

[mchehab@redhat.com: Fix merge conflicts with RC renaming patches]
Signed-off-by: Martin Wilks 
Signed-off-by: Patrick Boettcher 
Signed-off-by: Mauro Carvalho Chehab

[media] saa7134: Add support for Compro VideoMate Vista M1F

2010-12-29T10:17:17+00:00

Signed-off-by: Pavel Osnova 
Signed-off-by: Ramiro Morales 
Signed-off-by: Mauro Carvalho Chehab

[media] Add a keymap for Pixelview 002-T remote

2010-12-29T10:17:00+00:00

Signed-off-by: Mauro Carvalho Chehab