linux-toradex.git/include/net/af_vsock.h, branch v5.5-rc7

vsock: prevent transport modules unloading

2019-11-15T02:12:18+00:00

This patch adds 'module' member in the 'struct vsock_transport'
in order to get/put the transport module. This prevents the
module unloading while sockets are assigned to it.

We increase the module refcnt when a socket is assigned to a
transport, and we decrease the module refcnt when the socket
is destructed.

Reviewed-by: Stefan Hajnoczi 
Reviewed-by: Jorgen Hansen 
Signed-off-by: Stefano Garzarella 
Signed-off-by: David S. Miller

vsock: add multi-transports support

2019-11-15T02:12:18+00:00

This patch adds the support of multiple transports in the
VSOCK core.

With the multi-transports support, we can use vsock with nested VMs
(using also different hypervisors) loading both guest->host and
host->guest transports at the same time.

Major changes:
- vsock core module can be loaded regardless of the transports
- vsock_core_init() and vsock_core_exit() are renamed to
  vsock_core_register() and vsock_core_unregister()
- vsock_core_register() has a feature parameter (H2G, G2H, DGRAM)
  to identify which directions the transport can handle and if it's
  support DGRAM (only vmci)
- each stream socket is assigned to a transport when the remote CID
  is set (during the connect() or when we receive a connection request
  on a listener socket).
  The remote CID is used to decide which transport to use:
  - remote CID <= VMADDR_CID_HOST will use guest->host transport;
  - remote CID == local_cid (guest->host transport) will use guest->host
    transport for loopback (host->guest transports don't support loopback);
  - remote CID > VMADDR_CID_HOST will use host->guest transport;
- listener sockets are not bound to any transports since no transport
  operations are done on it. In this way we can create a listener
  socket, also if the transports are not loaded or with VMADDR_CID_ANY
  to listen on all transports.
- DGRAM sockets are handled as before, since only the vmci_transport
  provides this feature.

Signed-off-by: Stefano Garzarella 
Signed-off-by: David S. Miller

vsock: add vsock_create_connected() called by transports

2019-11-15T02:12:18+00:00

All transports call __vsock_create() with the same parameters,
most of them depending on the parent socket. In order to simplify
the VSOCK core APIs exposed to the transports, this patch adds
the vsock_create_connected() callable from transports to create
a new socket when a connection request is received.
We also unexported the __vsock_create().

Suggested-by: Stefan Hajnoczi 
Reviewed-by: Stefan Hajnoczi 
Reviewed-by: Jorgen Hansen 
Signed-off-by: Stefano Garzarella 
Signed-off-by: David S. Miller

vsock: handle buffer_size sockopts in the core

2019-11-15T02:12:18+00:00

virtio_transport and vmci_transport handle the buffer_size
sockopts in a very similar way.

In order to support multiple transports, this patch moves this
handling in the core to allow the user to change the options
also if the socket is not yet assigned to any transport.

This patch also adds the '.notify_buffer_size' callback in the
'struct virtio_transport' in order to inform the transport,
when the buffer_size is changed by the user. It is also useful
to limit the 'buffer_size' requested (e.g. virtio transports).

Acked-by: Dexuan Cui 
Reviewed-by: Stefan Hajnoczi 
Reviewed-by: Jorgen Hansen 
Signed-off-by: Stefano Garzarella 
Signed-off-by: David S. Miller

vsock: add 'struct vsock_sock *' param to vsock_core_get_transport()

2019-11-15T02:12:18+00:00

Since now the 'struct vsock_sock' object contains a pointer to
the transport, this patch adds a parameter to the
vsock_core_get_transport() to return the right transport
assigned to the socket.

This patch modifies also the virtio_transport_get_ops(), that
uses the vsock_core_get_transport(), adding the
'struct vsock_sock *' parameter.

Reviewed-by: Stefan Hajnoczi 
Reviewed-by: Jorgen Hansen 
Signed-off-by: Stefano Garzarella 
Signed-off-by: David S. Miller

vsock: add 'transport' member in the struct vsock_sock

2019-11-15T02:12:18+00:00

As a preparation to support multiple transports, this patch adds
the 'transport' member at the 'struct vsock_sock'.
This new field is initialized during the creation in the
__vsock_create() function.

This patch also renames the global 'transport' pointer to
'transport_single', since for now we're only supporting a single
transport registered at run-time.

Reviewed-by: Stefan Hajnoczi 
Reviewed-by: Jorgen Hansen 
Signed-off-by: Stefano Garzarella 
Signed-off-by: David S. Miller

vsock: remove include/linux/vm_sockets.h file

2019-11-15T02:12:17+00:00

This header file now only includes the "uapi/linux/vm_sockets.h".
We can include directly it when needed.

Reviewed-by: Stefan Hajnoczi 
Reviewed-by: Jorgen Hansen 
Signed-off-by: Stefano Garzarella 
Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 321

2019-06-05T15:37:05+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2 and no later version this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 33 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Kate Stewart 
Reviewed-by: Alexios Zavras 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000435.345978407@linutronix.de
Signed-off-by: Greg Kroah-Hartman

vsock: split dwork to avoid reinitializations

2018-08-07T19:39:13+00:00

syzbot reported that we reinitialize an active delayed
work in vsock_stream_connect():

	ODEBUG: init active (active state 0) object type: timer_list hint:
	delayed_work_timer_fn+0x0/0x90 kernel/workqueue.c:1414
	WARNING: CPU: 1 PID: 11518 at lib/debugobjects.c:329
	debug_print_object+0x16a/0x210 lib/debugobjects.c:326

The pattern is apparently wrong, we should only initialize
the dealyed work once and could repeatly schedule it. So we
have to move out the initializations to allocation side.
And to avoid confusion, we can split the shared dwork
into two, instead of re-using the same one.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reported-by: 
Cc: Andy king 
Cc: Stefan Hajnoczi 
Cc: Jorgen Hansen 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller

VSOCK: use TCP state constants for sk_state

2017-10-06T01:44:17+00:00

There are two state fields: socket->state and sock->sk_state.  The
socket->state field uses SS_UNCONNECTED, SS_CONNECTED, etc while the
sock->sk_state typically uses values that match TCP state constants
(TCP_CLOSE, TCP_ESTABLISHED).  AF_VSOCK does not follow this convention
and instead uses SS_* constants for both fields.

The sk_state field will be exposed to userspace through the vsock_diag
interface for ss(8), netstat(8), and other programs.

This patch switches sk_state to TCP state constants so that the meaning
of this field is consistent with other address families.  Not just
AF_INET and AF_INET6 use the TCP constants, AF_UNIX and others do too.

The following mapping was used to convert the code:

  SS_FREE -> TCP_CLOSE
  SS_UNCONNECTED -> TCP_CLOSE
  SS_CONNECTING -> TCP_SYN_SENT
  SS_CONNECTED -> TCP_ESTABLISHED
  SS_DISCONNECTING -> TCP_CLOSING
  VSOCK_SS_LISTEN -> TCP_LISTEN

In __vsock_create() the sk_state initialization was dropped because
sock_init_data() already initializes sk_state to TCP_CLOSE.

Signed-off-by: Stefan Hajnoczi 
Signed-off-by: David S. Miller