linux-toradex.git/include/net/bluetooth/l2cap.h, branch v6.12

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23+00:00

asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
	sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
	sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

Bluetooth: L2CAP: Remove unused declarations

2024-09-10T17:04:43+00:00

Commit e7b02296fb40 ("Bluetooth: Remove BT_HS") removed the implementations
but leave declarations.

Signed-off-by: Yue Haibing 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: compute LE flow credits based on recvbuf space

2024-05-14T14:51:07+00:00

Previously LE flow credits were returned to the
sender even if the socket's receive buffer was
full. This meant that no back-pressure
was applied to the sender, thus it continued to
send data, resulting in data loss without any
error being reported. Furthermore, the amount
of credits was essentially fixed to a small
amount, leading to reduced performance.

This is fixed by computing the number of returned
LE flow credits based on the estimated available
space in the receive buffer of an L2CAP socket.
Consequently, if the receive buffer is full, no
credits are returned until the buffer is read and
thus cleared by user-space.

Since the computation of available receive buffer
space can only be performed approximately (due to
sk_buff overhead) and the receive buffer size may
be changed by user-space after flow credits have
been sent, superfluous received data is temporary
stored within l2cap_pinfo. This is necessary
because Bluetooth LE provides no retransmission
mechanism once the data has been acked by the
physical layer.

If receive buffer space estimation is not possible
at the moment, we fall back to providing credits
for one full packet as before. This is currently
the case during connection setup, when MPS is not
yet available.

Fixes: b1c325c23d75 ("Bluetooth: Implement returning of LE L2CAP credits")
Signed-off-by: Sebastian Urban 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings

2024-05-14T14:51:04+00:00

-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.

There are currently a couple of objects (`req` and `rsp`), in a couple
of structures, that contain flexible structures (`struct l2cap_ecred_conn_req`
and `struct l2cap_ecred_conn_rsp`), for example:

struct l2cap_ecred_rsp_data {
        struct {
                struct l2cap_ecred_conn_rsp rsp;
                __le16 scid[L2CAP_ECRED_MAX_CID];
        } __packed pdu;
        int count;
};

in the struct above, `struct l2cap_ecred_conn_rsp` is a flexible
structure:

struct l2cap_ecred_conn_rsp {
        __le16 mtu;
        __le16 mps;
        __le16 credits;
        __le16 result;
        __le16 dcid[];
};

So, in order to avoid ending up with a flexible-array member in the
middle of another structure, we use the `struct_group_tagged()` (and
`__struct_group()` when the flexible structure is `__packed`) helper
to separate the flexible array from the rest of the members in the
flexible structure:

struct l2cap_ecred_conn_rsp {
        struct_group_tagged(l2cap_ecred_conn_rsp_hdr, hdr,

	... the rest of members

        );
        __le16 dcid[];
};

With the change described above, we now declare objects of the type of
the tagged struct, in this example `struct l2cap_ecred_conn_rsp_hdr`,
without embedding flexible arrays in the middle of other structures:

struct l2cap_ecred_rsp_data {
        struct {
                struct l2cap_ecred_conn_rsp_hdr rsp;
                __le16 scid[L2CAP_ECRED_MAX_CID];
        } __packed pdu;
        int count;
};

Also, when the flexible-array member needs to be accessed, we use
`container_of()` to retrieve a pointer to the flexible structure.

We also use the `DEFINE_RAW_FLEX()` helper for a couple of on-stack
definitions of a flexible structure where the size of the flexible-array
member is known at compile-time.

So, with these changes, fix the following warnings:
net/bluetooth/l2cap_core.c:1260:45: warning: structure containing a
flexible array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/l2cap_core.c:3740:45: warning: structure containing a
flexible array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/l2cap_core.c:4999:45: warning: structure containing a
flexible array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/l2cap_core.c:7116:47: warning: structure containing a
flexible array member is not at the end of another structure
[-Wflex-array-member-not-at-end]

Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_conn: Always use sk_timeo as conn_timeout

2024-03-06T22:22:41+00:00

This aligns the use socket sk_timeo as conn_timeout when initiating a
connection and then use it when scheduling the resulting HCI command,
that way the command is actually aborted synchronously thus not
blocking commands generated by hci_abort_conn_sync to inform the
controller the connection is to be aborted.

Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Remove BT_HS

2024-03-06T22:22:39+00:00

High Speed, Alternate MAC and PHY (AMP) extension, has been removed from
Bluetooth Core specification on 5.3:

https://www.bluetooth.com/blog/new-core-specification-v5-3-feature-enhancements/

Fixes: 244bc377591c ("Bluetooth: Add BT_HS config option")
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: L2CAP: Delay identity address updates

2023-04-24T04:48:44+00:00

This delays the identity address updates to give time for userspace to
process the new address otherwise there is a risk that userspace
creates a duplicated device if the MGMT event is delayed for some
reason.

Signed-off-by: Luiz Augusto von Dentz

Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put

2022-07-26T20:35:24+00:00

This fixes the following trace which is caused by hci_rx_work starting up
*after* the final channel reference has been put() during sock_close() but
*before* the references to the channel have been destroyed, so instead
the code now rely on kref_get_unless_zero/l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.

  refcount_t: increment on 0; use-after-free.
  BUG: KASAN: use-after-free in refcount_dec_and_test+0x20/0xd0
  Read of size 4 at addr ffffffc114f5bf18 by task kworker/u17:14/705

  CPU: 4 PID: 705 Comm: kworker/u17:14 Tainted: G S      W
  4.14.234-00003-g1fb6d0bd49a4-dirty #28
  Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150
  Google Inc. MSM sm8150 Flame DVT (DT)
  Workqueue: hci0 hci_rx_work
  Call trace:
   dump_backtrace+0x0/0x378
   show_stack+0x20/0x2c
   dump_stack+0x124/0x148
   print_address_description+0x80/0x2e8
   __kasan_report+0x168/0x188
   kasan_report+0x10/0x18
   __asan_load4+0x84/0x8c
   refcount_dec_and_test+0x20/0xd0
   l2cap_chan_put+0x48/0x12c
   l2cap_recv_frame+0x4770/0x6550
   l2cap_recv_acldata+0x44c/0x7a4
   hci_acldata_packet+0x100/0x188
   hci_rx_work+0x178/0x23c
   process_one_work+0x35c/0x95c
   worker_thread+0x4cc/0x960
   kthread+0x1a8/0x1c4
   ret_from_fork+0x10/0x18

Cc: stable@kernel.org
Reported-by: Lee Jones 
Signed-off-by: Luiz Augusto von Dentz 
Tested-by: Lee Jones 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: L2CAP: Fix not checking for maximum number of DCID

2021-03-15T20:08:33+00:00

When receiving L2CAP_CREDIT_BASED_CONNECTION_REQ the remote may request
more channels than allowed by the spec (10 octecs = 5 CIDs) so this
checks if the number of channels is bigger than the maximum allowed and
respond with an error.

Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann

Bluetooth: L2CAP: Fix handling fragmented length

2021-01-25T18:26:33+00:00

Bluetooth Core Specification v5.2, Vol. 3, Part A, section 1.4, table
1.1:

 'Start Fragments always either begin with the first octet of the Basic
  L2CAP header of a PDU or they have a length of zero (see [Vol 2] Part
  B, Section 6.6.2).'

Apparently this was changed by the following errata:

https://www.bluetooth.org/tse/errata_view.cfm?errata_id=10216

Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann