linux-toradex.git/include/net/raw.h, branch v5.11-rc2

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman

net: fix raw socket lookup device bind matching with VRFs

2018-11-08T00:12:39+00:00

When there exist a pair of raw sockets one unbound and one bound
to a VRF but equal in all other respects, when a packet is received
in the VRF context, __raw_v4_lookup() matches on both sockets.

This results in the packet being delivered over both sockets,
instead of only the raw socket bound to the VRF. The bound device
checks in __raw_v4_lookup() are replaced with a call to
raw_sk_bound_dev_eq() which correctly handles whether the packet
should be delivered over the unbound socket in such cases.

In __raw_v6_lookup() the match on the device binding of the socket is
similarly updated to use raw_sk_bound_dev_eq() which matches the
handling in __raw_v4_lookup().

Importantly raw_sk_bound_dev_eq() takes the raw_l3mdev_accept sysctl
into account.

Signed-off-by: Duncan Eastoe 
Signed-off-by: Mike Manning 
Reviewed-by: David Ahern 
Tested-by: David Ahern 
Signed-off-by: David S. Miller

net: provide a sysctl raw_l3mdev_accept for raw socket lookup with VRFs

2018-11-08T00:12:38+00:00

Add a sysctl raw_l3mdev_accept to control raw socket lookup in a manner
similar to use of tcp_l3mdev_accept for stream and of udp_l3mdev_accept
for datagram sockets. Have this default to enabled for reasons of
backwards compatibility. This is so as to specify the output device
with cmsg and IP_PKTINFO, but using a socket not bound to the
corresponding VRF. This allows e.g. older ping implementations to be
run with specifying the device but without executing it in the VRF.
If the option is disabled, packets received in a VRF context are only
handled by a raw socket bound to the VRF, and correspondingly packets
in the default VRF are only handled by a socket not bound to any VRF.

Signed-off-by: Mike Manning 
Reviewed-by: David Ahern 
Tested-by: David Ahern 
Signed-off-by: David S. Miller

ipv{4,6}/raw: simplify ѕeq_file code

2018-05-16T05:23:35+00:00

Pass the hashtable to the proc private data instead of copying
it into the per-file private data.

Signed-off-by: Christoph Hellwig

net: ipv4: add second dif to raw socket lookups

2017-08-07T18:39:21+00:00

Add a second device index, sdif, to raw socket lookups. sdif is the
index for ingress devices enslaved to an l3mdev. It allows the lookups
to consider the enslaved device as well as the L3 domain when searching
for a socket.

Signed-off-by: David Ahern 
Signed-off-by: David S. Miller

net: ip, diag -- Add diag interface for raw sockets

2016-10-23T23:35:24+00:00

In criu we are actively using diag interface to collect sockets
present in the system when dumping applications. And while for
unix, tcp, udp[lite], packet, netlink it works as expected,
the raw sockets do not have. Thus add it.

v2:
 - add missing sock_put calls in raw_diag_dump_one (by eric.dumazet@)
 - implement @destroy for diag requests (by dsa@)

v3:
 - add export of raw_abort for IPv6 (by dsa@)
 - pass net-admin flag into inet_sk_diag_fill due to
   changes in net-next branch (by dsa@)

v4:
 - use @pad in struct inet_diag_req_v2 for raw socket
   protocol specification: raw module carries sockets
   which may have custom protocol passed from socket()
   syscall and sole @sdiag_protocol is not enough to
   match underlied ones
 - start reporting protocol specifed in socket() call
   when sockets are raw ones for the same reason: user
   space tools like ss may parse this attribute and use
   it for socket matching

v5 (by eric.dumazet@):
 - use sock_hold in raw_sock_get instead of atomic_inc,
   we're holding (raw_v4_hashinfo|raw_v6_hashinfo)->lock
   when looking up so counter won't be zero here.

v6:
 - use sdiag_raw_protocol() helper which will access @pad
   structure used for raw sockets protocol specification:
   we can't simply rename this member without breaking uapi

v7:
 - sine sdiag_raw_protocol() helper is not suitable for
   uapi lets rather make an alias structure with proper
   names. __check_inet_diag_req_raw helper will catch
   if any of structure unintentionally changed.

CC: David S. Miller 
CC: Eric Dumazet 
CC: David Ahern 
CC: Alexey Kuznetsov 
CC: James Morris 
CC: Hideaki YOSHIFUJI 
CC: Patrick McHardy 
CC: Andrey Vagin 
CC: Stephen Hemminger 
Signed-off-by: Cyrill Gorcunov 
Signed-off-by: David S. Miller

sock: struct proto hash function may error

2016-02-11T08:54:14+00:00

In order to support fast reuseport lookups in TCP, the hash function
defined in struct proto must be capable of returning an error code.
This patch changes the function signature of all related hash functions
to return an integer and handles or propagates this return value at
all call sites.

Signed-off-by: Craig Gallek 
Signed-off-by: David S. Miller

raw/rawv6.h: Remove extern from function prototypes

2013-09-23T05:51:08+00:00

There are a mix of function prototypes with and without extern
in the kernel sources.  Standardize on not using extern for
function prototypes.

Function prototypes don't need to be written with extern.
extern is assumed by the compiler.  Its use is as unnecessary as
using auto to declare automatic/local variables in a block.

Signed-off-by: Joe Perches 
Signed-off-by: David S. Miller

include/net/raw.h: Convert raw_seq_private macro to inline

2010-09-08T20:42:22+00:00

Signed-off-by: Joe Perches 
Signed-off-by: David S. Miller

ipv4: ipmr: support multiple tables

2010-04-13T21:49:34+00:00

This patch adds support for multiple independant multicast routing instances,
named "tables".

Userspace multicast routing daemons can bind to a specific table instance by
issuing a setsockopt call using a new option MRT_TABLE. The table number is
stored in the raw socket data and affects all following ipmr setsockopt(),
getsockopt() and ioctl() calls. By default, a single table (RT_TABLE_DEFAULT)
is created with a default routing rule pointing to it. Newly created pimreg
devices have the table number appended ("pimregX"), with the exception of
devices created in the default table, which are named just "pimreg" for
compatibility reasons.

Packets are directed to a specific table instance using routing rules,
similar to how regular routing rules work. Currently iif, oif and mark
are supported as keys, source and destination addresses could be supported
additionally.

Example usage:

- bind pimd/xorp/... to a specific table:

uint32_t table = 123;
setsockopt(fd, IPPROTO_IP, MRT_TABLE, &table, sizeof(table));

- create routing rules directing packets to the new table:

# ip mrule add iif eth0 lookup 123
# ip mrule add oif eth0 lookup 123

Signed-off-by: Patrick McHardy 
Signed-off-by: David S. Miller