linux-toradex.git/include/net/sctp/stream_interleave.h, branch v5.0

sctp: implement handle_ftsn for sctp_stream_interleave

2017-12-15T18:52:22+00:00

handle_ftsn is added as a member of sctp_stream_interleave, used to skip
ssn for data or mid for idata, called for SCTP_CMD_PROCESS_FWDTSN cmd.

sctp_handle_iftsn works for ifwdtsn, and sctp_handle_fwdtsn works for
fwdtsn. Note that different from sctp_handle_fwdtsn, sctp_handle_iftsn
could do stream abort pd.

Signed-off-by: Xin Long 
Acked-by: Marcelo R. Leitner 
Signed-off-by: David S. Miller

sctp: implement report_ftsn for sctp_stream_interleave

2017-12-15T18:52:22+00:00

report_ftsn is added as a member of sctp_stream_interleave, used to
skip tsn from tsnmap, remove old events from reasm or lobby queue,
and abort pd for data or idata, called for SCTP_CMD_REPORT_FWDTSN
cmd and asoc reset.

sctp_report_iftsn works for ifwdtsn, and sctp_report_fwdtsn works
for fwdtsn. Note that sctp_report_iftsn doesn't do asoc abort_pd,
as stream abort_pd will be done when handling ifwdtsn. But when
ftsn is equal with ftsn, which means asoc reset, asoc abort_pd has
to be done.

Signed-off-by: Xin Long 
Acked-by: Marcelo R. Leitner 
Signed-off-by: David S. Miller

sctp: implement validate_ftsn for sctp_stream_interleave

2017-12-15T18:52:22+00:00

validate_ftsn is added as a member of sctp_stream_interleave, used to
validate ssn/chunk type for fwdtsn or mid (message id)/chunk type for
ifwdtsn, called in sctp_sf_eat_fwd_tsn, just as validate_data.

If this check fails, an abort packet will be sent, as said in section
2.3.1 of RFC8260.

As ifwdtsn and fwdtsn chunks have different length, it also defines
ftsn_chunk_len for sctp_stream_interleave to describe the chunk size.
Then it replaces all sizeof(struct sctp_fwdtsn_chunk) with
sctp_ftsnchk_len.

It also adds the process for ifwdtsn in rx path. As Marcelo pointed
out, there's no need to add event table for ifwdtsn, but just share
prsctp_chunk_event_table with fwdtsn's. It would drop fwdtsn chunk
for ifwdtsn and drop ifwdtsn chunk for fwdtsn by calling validate_ftsn
in sctp_sf_eat_fwd_tsn.

After this patch, the ifwdtsn can be accepted.

Note that this patch also removes the sctp.intl_enable check for
idata chunks in sctp_chunk_event_lookup, as it will do this check
in validate_data later.

Signed-off-by: Xin Long 
Acked-by: Marcelo R. Leitner 
Signed-off-by: David S. Miller

sctp: implement generate_ftsn for sctp_stream_interleave

2017-12-15T18:52:21+00:00

generate_ftsn is added as a member of sctp_stream_interleave, used to
create fwdtsn or ifwdtsn chunk according to abandoned chunks, called
in sctp_retransmit and sctp_outq_sack.

sctp_generate_iftsn works for ifwdtsn, and sctp_generate_fwdtsn is
still used for making fwdtsn.

Signed-off-by: Xin Long 
Acked-by: Marcelo R. Leitner 
Signed-off-by: David S. Miller

sctp: implement abort_pd for sctp_stream_interleave

2017-12-11T16:23:05+00:00

abort_pd is added as a member of sctp_stream_interleave, used to abort
partial delivery for data or idata, called in sctp_cmd_assoc_failed.

Since stream interleave allows to do partial delivery for each stream
at the same time, sctp_intl_abort_pd for idata would be very different
from the old function sctp_ulpq_abort_pd for data.

Note that sctp_ulpevent_make_pdapi will support per stream in this
patch by adding pdapi_stream and pdapi_seq in sctp_pdapi_event, as
described in section 6.1.7 of RFC6458.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: implement start_pd for sctp_stream_interleave

2017-12-11T16:23:05+00:00

start_pd is added as a member of sctp_stream_interleave, used to
do partial_delivery for data or idata when datalen >= asoc->rwnd
in sctp_eat_data. The codes have been done in last patches, but
they need to be extracted into start_pd, so that it could be used
for SCTP_CMD_PART_DELIVER cmd as well.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: implement renege_events for sctp_stream_interleave

2017-12-11T16:23:05+00:00

renege_events is added as a member of sctp_stream_interleave, used to
renege some old data or idata in reasm or lobby queue properly to free
some memory for the new data when there's memory stress.

It defines sctp_renege_events for idata, and leaves sctp_ulpq_renege
as it is for data.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: implement enqueue_event for sctp_stream_interleave

2017-12-11T16:23:05+00:00

enqueue_event is added as a member of sctp_stream_interleave, used to
enqueue either data, idata or notification events into user socket rx
queue.

It replaces sctp_ulpq_tail_event used in the other places with
enqueue_event.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: implement ulpevent_data for sctp_stream_interleave

2017-12-11T16:23:05+00:00

ulpevent_data is added as a member of sctp_stream_interleave, used to
do the most process in ulpq, including to convert data or idata chunk
to event, reasm them in reasm queue and put them in lobby queue in
right order, and deliver them up to user sk rx queue.

This procedure is described in section 2.2.3 of RFC8260.

It adds most functions for idata here to do the similar process as
the old functions for data. But since the details are very different
between them, the old functions can not be reused for idata.

event->ssn and event->ppid settings are moved to ulpevent_data from
sctp_ulpevent_make_rcvmsg, so that sctp_ulpevent_make_rcvmsg could
work for both data and idata.

Note that mid is added in sctp_ulpevent for idata, __packed has to
be used for defining sctp_ulpevent, or it would exceeds the skb cb
that saves a sctp_ulpevent variable for ulp layer process.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: implement validate_data for sctp_stream_interleave

2017-12-11T16:23:04+00:00

validate_data is added as a member of sctp_stream_interleave, used
to validate ssn/chunk type for data or mid (message id)/chunk type
for idata, called in sctp_eat_data.

If this check fails, an abort packet will be sent, as said in
section 2.2.3 of RFC8260.

It also adds the process for idata in rx path. As Marcelo pointed
out, there's no need to add event table for idata, but just share
chunk_event_table with data's. It would drop data chunk for idata
and drop idata chunk for data by calling validate_data in
sctp_eat_data.

As last patch did, it also replaces sizeof(struct sctp_data_chunk)
with sctp_datachk_len for rx path.

After this patch, the idata can be accepted and delivered to ulp
layer.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller