linux-toradex.git/include/net/sctp, branch v5.12-rc5

sctp: bring inet(6)_skb_parm back to sctp_input_cb

2020-11-05T22:27:30+00:00

inet(6)_skb_parm was removed from sctp_input_cb by Commit a1dd2cf2f1ae
("sctp: allow changing transport encap_port by peer packets"), as it
thought sctp_input_cb->header is not used any more in SCTP.

syzbot reported a crash:

  [ ] BUG: KASAN: use-after-free in decode_session6+0xe7c/0x1580
  [ ]
  [ ] Call Trace:
  [ ]  
  [ ]  dump_stack+0x107/0x163
  [ ]  kasan_report.cold+0x1f/0x37
  [ ]  decode_session6+0xe7c/0x1580
  [ ]  __xfrm_policy_check+0x2fa/0x2850
  [ ]  sctp_rcv+0x12b0/0x2e30
  [ ]  sctp6_rcv+0x22/0x40
  [ ]  ip6_protocol_deliver_rcu+0x2e8/0x1680
  [ ]  ip6_input_finish+0x7f/0x160
  [ ]  ip6_input+0x9c/0xd0
  [ ]  ipv6_rcv+0x28e/0x3c0

It was caused by sctp_input_cb->header/IP6CB(skb) still used in sctp rx
path decode_session6() but some members overwritten by sctp6_rcv().

This patch is to fix it by bring inet(6)_skb_parm back to sctp_input_cb
and not overwriting it in sctp4/6_rcv() and sctp_udp_rcv().

Reported-by: syzbot+5be8aebb1b7dfa90ef31@syzkaller.appspotmail.com
Fixes: a1dd2cf2f1ae ("sctp: allow changing transport encap_port by peer packets")
Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Link: https://lore.kernel.org/r/136c1a7a419341487c504be6d1996928d9d16e02.1604472932.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski

sctp: add the error cause for new encapsulation port restart

2020-10-30T22:24:40+00:00

This patch is to add the function to make the abort chunk with
the error cause for new encapsulation port restart, defined
on Section 4.4 in draft-tuexen-tsvwg-sctp-udp-encaps-cons-03.

v1->v2:
  - no change.
v2->v3:
  - no need to call htons() when setting nep.cur_port/new_port.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: Jakub Kicinski

sctp: add udphdr to overhead when udp_port is set

2020-10-30T22:24:21+00:00

sctp_mtu_payload() is for calculating the frag size before making
chunks from a msg. So we should only add udphdr size to overhead
when udp socks are listening, as only then sctp can handle the
incoming sctp over udp packets and outgoing sctp over udp packets
will be possible.

Note that we can't do this according to transport->encap_port, as
different transports may be set to different values, while the
chunks were made before choosing the transport, we could not be
able to meet all rfc6951#section-5.6 recommends.

v1->v2:
  - Add udp_port for sctp_sock to avoid a potential race issue, it
    will be used in xmit path in the next patch.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: Jakub Kicinski

sctp: allow changing transport encap_port by peer packets

2020-10-30T22:24:16+00:00

As rfc6951#section-5.4 says:

  "After finding the SCTP association (which
   includes checking the verification tag), the UDP source port MUST be
   stored as the encapsulation port for the destination address the SCTP
   packet is received from (see Section 5.1).

   When a non-encapsulated SCTP packet is received by the SCTP stack,
   the encapsulation of outgoing packets belonging to the same
   association and the corresponding destination address MUST be
   disabled."

transport encap_port should be updated by a validated incoming packet's
udp src port.

We save the udp src port in sctp_input_cb->encap_port, and then update
the transport in two places:

  1. right after vtag is verified, which is required by RFC, and this
     allows the existent transports to be updated by the chunks that
     can only be processed on an asoc.

  2. right before processing the 'init' where the transports are added,
     and this allows building a sctp over udp connection by client with
     the server not knowing the remote encap port.

  3. when processing ootb_pkt and creating the temporary transport for
     the reply pkt.

Note that sctp_input_cb->header is removed, as it's not used any more
in sctp.

v1->v2:
  - Change encap_port as __be16 for sctp_input_cb.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: Jakub Kicinski

sctp: add encap_port for netns sock asoc and transport

2020-10-30T22:24:06+00:00

encap_port is added as per netns/sock/assoc/transport, and the
latter one's encap_port inherits the former one's by default.
The transport's encap_port value would mostly decide if one
packet should go out with udp encapsulated or not.

This patch also allows users to set netns' encap_port by sysctl.

v1->v2:
  - Change to define encap_port as __be16 for sctp_sock, asoc and
    transport.
v2->v3:
  - No change.
v3->v4:
  - Add 'encap_port' entry in ip-sysctl.rst.
v4->v5:
  - Improve the description of encap_port in ip-sysctl.rst.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: Jakub Kicinski

sctp: create udp4 sock and add its encap_rcv

2020-10-30T22:23:52+00:00

This patch is to add the functions to create/release udp4 sock,
and set the sock's encap_rcv to process the incoming udp encap
sctp packets. In sctp_udp_rcv(), as we can see, all we need to
do is fix the transport header for sctp_rcv(), then it would
implement the part of rfc6951#section-5.4:

  "When an encapsulated packet is received, the UDP header is removed.
   Then, the generic lookup is performed, as done by an SCTP stack
   whenever a packet is received, to find the association for the
   received SCTP packet"

Note that these functions will be called in the last patch of
this patchset when enabling this feature.

v1->v2:
  - Add pr_err() when fails to create udp v4 sock.
v2->v3:
  - Add 'select NET_UDP_TUNNEL' in sctp Kconfig.
v3->v4:
  - No change.
v4->v5:
  - Change to set udp_port to 0 by default.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: Jakub Kicinski

net: sctp: Fix IPv6 ancestor_size calc in sctp_copy_descendant

2020-09-20T21:15:12+00:00

When calculating ancestor_size with IPv6 enabled, simply using
sizeof(struct ipv6_pinfo) doesn't account for extra bytes needed for
alignment in the struct sctp6_sock. On x86, there aren't any extra
bytes, but on ARM the ipv6_pinfo structure is aligned on an 8-byte
boundary so there were 4 pad bytes that were omitted from the
ancestor_size calculation.  This would lead to corruption of the
pd_lobby pointers, causing an oops when trying to free the sctp
structure on socket close.

Fixes: 636d25d557d1 ("sctp: not copy sctp_sock pd_lobby in sctp_copy_descendant")
Signed-off-by: Henry Ptasinski 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: David S. Miller

net: pass a sockptr_t into ->setsockopt

2020-07-24T22:41:54+00:00

Rework the remaining setsockopt code to pass a sockptr_t instead of a
plain user pointer.  This removes the last remaining set_fs(KERNEL_DS)
outside of architecture specific code.

Signed-off-by: Christoph Hellwig 
Acked-by: Stefan Schmidt  [ieee802154]
Acked-by: Matthieu Baerts 
Signed-off-by: David S. Miller

net/ipv6: remove compat_ipv6_{get,set}sockopt

2020-07-20T01:16:41+00:00

Handle the few cases that need special treatment in-line using
in_compat_syscall().  This also removes all the now unused
compat_{get,set}sockopt methods.

Signed-off-by: Christoph Hellwig 
Signed-off-by: David S. Miller

net: sctp: drop duplicate words in comments

2020-07-16T03:34:11+00:00

Drop doubled words in several comments.

Signed-off-by: Randy Dunlap 
Cc: "David S. Miller" 
Cc: netdev@vger.kernel.org
Signed-off-by: Jakub Kicinski