linux-toradex.git/include/net/udp.h, branch v5.5-rc7

udp: Remove unlikely() from IS_ERR*() condition

2019-08-31T02:49:37+00:00

"unlikely(IS_ERR_OR_NULL(x))" is excessive. IS_ERR_OR_NULL() already uses
unlikely() internally.

Signed-off-by: Denis Efremov 
Cc: "David S. Miller" 
Cc: Joe Perches 
Cc: Andrew Morton 
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller

Merge tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2019-05-31T15:34:32+00:00

Pull yet more SPDX updates from Greg KH:
 "Here is another set of reviewed patches that adds SPDX tags to
  different kernel files, based on a set of rules that are being used to
  parse the comments to try to determine that the license of the file is
  "GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of
  these matches are included here, a number of "non-obvious" variants of
  text have been found but those have been postponed for later review
  and analysis.

  There is also a patch in here to add the proper SPDX header to a bunch
  of Kbuild files that we have missed in the past due to new files being
  added and forgetting that Kbuild uses two different file names for
  Makefiles. This issue was reported by the Kbuild maintainer.

  These patches have been out for review on the linux-spdx@vger mailing
  list, and while they were created by automatic tools, they were
  hand-verified by a bunch of different people, all whom names are on
  the patches are reviewers"

* tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (82 commits)
  treewide: Add SPDX license identifier - Kbuild
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201
  ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman

udp: Avoid post-GRO UDP checksum recalculation

2019-05-30T18:10:39+00:00

Currently, when resegmenting an unexpected UDP GRO packet, the full UDP
checksum will be calculated for every new SKB created by skb_segment()
because the netdev features passed in by udp_rcv_segment() lack any
information about checksum offload capabilities.

Usually, we have no need to perform this calculation again, as
  1) The GRO implementation guarantees that any packets making it to the
     udp_rcv_segment() function had correct checksums, and, more
     importantly,
  2) Upon the successful return of udp_rcv_segment(), we immediately pull
     the UDP header off and either queue the segment to the socket or
     hand it off to a new protocol handler.

Unless userspace has set the IP_CHECKSUM sockopt to indicate that they
want the final checksum values, we can pass the needed netdev feature
flags to __skb_gso_segment() to avoid checksumming each segment in
skb_segment().

Fixes: cf329aa42b66 ("udp: cope with UDP GRO packet misdirection")
Cc: Paolo Abeni 
Cc: Subash Abhinov Kasiviswanathan 
Signed-off-by: Sean Tranchetti 
Acked-by: Paolo Abeni 
Signed-off-by: David S. Miller

datagram: remove rendundant 'peeked' argument

2019-04-08T16:51:54+00:00

After commit a297569fe00a ("net/udp: do not touch skb->peeked unless
really needed") the 'peeked' argument of __skb_try_recv_datagram()
and friends is always equal to !!'flags & MSG_PEEK'.

Since such argument is really a boolean info, and the callers have
already 'flags & MSG_PEEK' handy, we can remove it and clean-up the
code a bit.

Signed-off-by: Paolo Abeni 
Acked-by: Willem de Bruijn 
Signed-off-by: David S. Miller

net: Convert protocol error handlers from void to int

2018-11-09T01:13:08+00:00

We'll need this to handle ICMP errors for tunnels without a sending socket
(i.e. FoU and GUE). There, we might have to look up different types of IP
tunnels, registered as network protocols, before we get a match, so we
want this for the error handlers of IPPROTO_IPIP and IPPROTO_IPV6 in both
inet_protos and inet6_protos. These error codes will be used in the next
patch.

For consistency, return sensible error codes in protocol error handlers
whenever handlers can't handle errors because, even if valid, they don't
match a protocol or any of its states.

This has no effect on existing error handling paths.

Signed-off-by: Stefano Brivio 
Reviewed-by: Sabrina Dubroca 
Signed-off-by: David S. Miller

udp: cope with UDP GRO packet misdirection

2018-11-08T00:23:05+00:00

In some scenarios, the GRO engine can assemble an UDP GRO packet
that ultimately lands on a non GRO-enabled socket.
This patch tries to address the issue explicitly checking for the UDP
socket features before enqueuing the packet, and eventually segmenting
the unexpected GRO packet, as needed.

We must also cope with re-insertion requests: after segmentation the
UDP code calls the helper introduced by the previous patches, as needed.

Segmentation is performed by a common helper, which takes care of
updating socket and protocol stats is case of failure.

rfc v3 -> v1
 - fix compile issues with rxrpc
 - when gso_segment returns NULL, treat is as an error
 - added 'ipv4' argument to udp_rcv_segment()

rfc v2 -> rfc v3
 - moved udp_rcv_segment() into net/udp.h, account errors to socket
   and ns, always return NULL or segs list

Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller

net: ensure unbound datagram socket to be chosen when not in a VRF

2018-11-08T00:12:38+00:00

Ensure an unbound datagram skt is chosen when not in a VRF. The check
for a device match in compute_score() for UDP must be performed when
there is no device match. For this, a failure is returned when there is
no device match. This ensures that bound sockets are never selected,
even if there is no unbound socket.

Allow IPv6 packets to be sent over a datagram skt bound to a VRF. These
packets are currently blocked, as flowi6_oif was set to that of the
master vrf device, and the ipi6_ifindex is that of the slave device.
Allow these packets to be sent by checking the device with ipi6_ifindex
has the same L3 scope as that of the bound device of the skt, which is
the master vrf device. Note that this check always succeeds if the skt
is unbound.

Even though the right datagram skt is now selected by compute_score(),
a different skt is being returned that is bound to the wrong vrf. The
difference between these and stream sockets is the handling of the skt
option for SO_REUSEPORT. While the handling when adding a skt for reuse
correctly checks that the bound device of the skt is a match, the skts
in the hashslot are already incorrect. So for the same hash, a skt for
the wrong vrf may be selected for the required port. The root cause is
that the skt is immediately placed into a slot when it is created,
but when the skt is then bound using SO_BINDTODEVICE, it remains in the
same slot. The solution is to move the skt to the correct slot by
forcing a rehash.

Signed-off-by: Mike Manning 
Reviewed-by: David Ahern 
Tested-by: David Ahern 
Signed-off-by: David S. Miller

udp: gro behind static key

2018-10-05T18:52:38+00:00

Avoid the socket lookup cost in udp_gro_receive if no socket has a
udp tunnel callback configured.

udp_sk(sk)->gro_receive requires a registration with
setup_udp_tunnel_sock, which enables the static key.

Signed-off-by: Willem de Bruijn 
Acked-by: Paolo Abeni 
Signed-off-by: David S. Miller

Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/net

2018-07-03T01:29:26+00:00

Simple overlapping changes in stmmac driver.

Adjust skb_gro_flush_final_remcsum function signature to make GRO list
changes in net-next, as per Stephen Rothwell's example merge
resolution.

Signed-off-by: David S. Miller