linux-toradex.git/include/net, branch v2.6.31.7 Linux kernel for Apalis and Colibri modules netfilter: nf_nat: fix NAT issue in 2.6.30.4+ 2009-12-08T18:22:33+00:00 Jozsef Kadlecsik kadlec@blackhole.kfki.hu 2009-11-06T08:43:42+00:00 325786e848323cd6c3e658886448ceafda09bf86 commit f9dd09c7f7199685601d75882447a6598be8a3e0 upstream. Vitezslav Samel discovered that since 2.6.30.4+ active FTP can not work over NAT. The "cause" of the problem was a fix of unacknowledged data detection with NAT (commit a3a9f79e361e864f0e9d75ebe2a0cb43d17c4272). However, actually, that fix uncovered a long standing bug in TCP conntrack: when NAT was enabled, we simply updated the max of the right edge of the segments we have seen (td_end), by the offset NAT produced with changing IP/port in the data. However, we did not update the other parameter (td_maxend) which is affected by the NAT offset. Thus that could drift away from the correct value and thus resulted breaking active FTP. The patch below fixes the issue by *not* updating the conntrack parameters from NAT, but instead taking into account the NAT offsets in conntrack in a consistent way. (Updating from NAT would be more harder and expensive because it'd need to re-calculate parameters we already calculated in conntrack.) Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit f9dd09c7f7199685601d75882447a6598be8a3e0 upstream.

Vitezslav Samel discovered that since 2.6.30.4+ active FTP can not work
over NAT. The "cause" of the problem was a fix of unacknowledged data
detection with NAT (commit a3a9f79e361e864f0e9d75ebe2a0cb43d17c4272).
However, actually, that fix uncovered a long standing bug in TCP conntrack:
when NAT was enabled, we simply updated the max of the right edge of
the segments we have seen (td_end), by the offset NAT produced with
changing IP/port in the data. However, we did not update the other parameter
(td_maxend) which is affected by the NAT offset. Thus that could drift
away from the correct value and thus resulted breaking active FTP.

The patch below fixes the issue by *not* updating the conntrack parameters
from NAT, but instead taking into account the NAT offsets in conntrack in a
consistent way. (Updating from NAT would be more harder and expensive because
it'd need to re-calculate parameters we already calculated in conntrack.)

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mac80211: fix spurious delBA handling 2009-12-08T18:21:44+00:00 Johannes Berg johannes@sipsolutions.net 2009-11-22T11:28:41+00:00 b62b52ae0de1bb97f8c9dfe4609270493d77c7c4 commit 827d42c9ac91ddd728e4f4a31fefb906ef2ceff7 upstream. Lennert Buytenhek noticed that delBA handling in mac80211 was broken and has remotely triggerable problems, some of which are due to some code shuffling I did that ended up changing the order in which things were done -- this was commit d75636ef9c1af224f1097941879d5a8db7cd04e5 Author: Johannes Berg <johannes@sipsolutions.net> Date: Tue Feb 10 21:25:53 2009 +0100 mac80211: RX aggregation: clean up stop session and other parts were already present in the original commit d92684e66091c0f0101819619b315b4bb8b5bcc5 Author: Ron Rindjunsky <ron.rindjunsky@intel.com> Date: Mon Jan 28 14:07:22 2008 +0200 mac80211: A-MPDU Tx add delBA from recipient support The first problem is that I moved a BUG_ON before various checks -- thereby making it possible to hit. As the comment indicates, the BUG_ON can be removed since the ampdu_action callback must already exist when the state is != IDLE. The second problem isn't easily exploitable but there's a race condition due to unconditionally setting the state to OPERATIONAL when a delBA frame is received, even when no aggregation session was ever initiated. All the drivers accept stopping the session even then, but that opens a race window where crashes could happen before the driver accepts it. Right now, a WARN_ON may happen with non-HT drivers, while the race opens only for HT drivers. For this case, there are two things necessary to fix it: 1) don't process spurious delBA frames, and be more careful about the session state; don't drop the lock 2) HT drivers need to be prepared to handle a session stop even before the session was really started -- this is true for all drivers (that support aggregation) but iwlwifi which can be fixed easily. The other HT drivers (ath9k and ar9170) are behaving properly already. Reported-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 827d42c9ac91ddd728e4f4a31fefb906ef2ceff7 upstream.

Lennert Buytenhek noticed that delBA handling in mac80211
was broken and has remotely triggerable problems, some of
which are due to some code shuffling I did that ended up
changing the order in which things were done -- this was

  commit d75636ef9c1af224f1097941879d5a8db7cd04e5
  Author: Johannes Berg <johannes@sipsolutions.net>
  Date:   Tue Feb 10 21:25:53 2009 +0100

    mac80211: RX aggregation: clean up stop session

and other parts were already present in the original

  commit d92684e66091c0f0101819619b315b4bb8b5bcc5
  Author: Ron Rindjunsky <ron.rindjunsky@intel.com>
  Date:   Mon Jan 28 14:07:22 2008 +0200

      mac80211: A-MPDU Tx add delBA from recipient support

The first problem is that I moved a BUG_ON before various
checks -- thereby making it possible to hit. As the comment
indicates, the BUG_ON can be removed since the ampdu_action
callback must already exist when the state is != IDLE.

The second problem isn't easily exploitable but there's a
race condition due to unconditionally setting the state to
OPERATIONAL when a delBA frame is received, even when no
aggregation session was ever initiated. All the drivers
accept stopping the session even then, but that opens a
race window where crashes could happen before the driver
accepts it. Right now, a WARN_ON may happen with non-HT
drivers, while the race opens only for HT drivers.

For this case, there are two things necessary to fix it:
 1) don't process spurious delBA frames, and be more careful
    about the session state; don't drop the lock

 2) HT drivers need to be prepared to handle a session stop
    even before the session was really started -- this is
    true for all drivers (that support aggregation) but
    iwlwifi which can be fixed easily. The other HT drivers
    (ath9k and ar9170) are behaving properly already.

Reported-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bluetooth: Add extra device reference counting for connections 2009-10-22T22:11:53+00:00 Marcel Holtmann marcel@holtmann.org 2009-08-22T21:19:26+00:00 34976a3ca81f3f5a250ba6074bda0848e97cf2e9 commit 9eba32b86d17ef87131fa0bce43c614904ab5781 upstream. The device model itself has no real usable reference counting at the moment and this causes problems if parents are deleted before their children. The device model itself handles the memory details of this correctly, but the uevent order is not consistent. This causes various problems for systems like HAL or even X. So until device_put() does a proper cleanup, the device for Bluetooth connection will be protected with an extra reference counting to ensure the correct order of uevents when connections are terminated. This is not an automatic feature. Higher Bluetooth layers like HIDP or BNEP should grab this new reference to ensure that their uevents are send before the ones from the parent device. Based on a report by Brian Rogers <brian@xyzw.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 9eba32b86d17ef87131fa0bce43c614904ab5781 upstream.

The device model itself has no real usable reference counting at the
moment and this causes problems if parents are deleted before their
children. The device model itself handles the memory details of this
correctly, but the uevent order is not consistent. This causes various
problems for systems like HAL or even X.

So until device_put() does a proper cleanup, the device for Bluetooth
connection will be protected with an extra reference counting to ensure
the correct order of uevents when connections are terminated.

This is not an automatic feature. Higher Bluetooth layers like HIDP or
BNEP should grab this new reference to ensure that their uevents are
send before the ones from the parent device.

Based on a report by Brian Rogers <brian@xyzw.org>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
pkt_sched: Revert tasklet_hrtimer changes. 2009-09-02T00:59:25+00:00 David S. Miller davem@davemloft.net 2009-09-02T00:59:25+00:00 2fbd3da3877ad8d923b055e5996f80b4d4a6daf4 These are full of unresolved problems, mainly that conversions don't work 1-1 from hrtimers to tasklet_hrtimers because unlike hrtimers tasklets can't be killed from softirq context. And when a qdisc gets reset, that's exactly what we need to do here. We'll work this out in the net-next-2.6 tree and if warranted we'll backport that work to -stable. This reverts the following 3 changesets: a2cb6a4dd470d7a64255a10b843b0d188416b78f ("pkt_sched: Fix bogon in tasklet_hrtimer changes.") 38acce2d7983632100a9ff3fd20295f6e34074a8 ("pkt_sched: Convert CBQ to tasklet_hrtimer.") ee5f9757ea17759e1ce5503bdae2b07e48e32af9 ("pkt_sched: Convert qdisc_watchdog to tasklet_hrtimer") Signed-off-by: David S. Miller <davem@davemloft.net> 
These are full of unresolved problems, mainly that conversions don't
work 1-1 from hrtimers to tasklet_hrtimers because unlike hrtimers
tasklets can't be killed from softirq context.

And when a qdisc gets reset, that's exactly what we need to do here.

We'll work this out in the net-next-2.6 tree and if warranted we'll
backport that work to -stable.

This reverts the following 3 changesets:

a2cb6a4dd470d7a64255a10b843b0d188416b78f
("pkt_sched: Fix bogon in tasklet_hrtimer changes.")

38acce2d7983632100a9ff3fd20295f6e34074a8
("pkt_sched: Convert CBQ to tasklet_hrtimer.")

ee5f9757ea17759e1ce5503bdae2b07e48e32af9
("pkt_sched: Convert qdisc_watchdog to tasklet_hrtimer")

Signed-off-by: David S. Miller <davem@davemloft.net>
pkt_sched: Convert qdisc_watchdog to tasklet_hrtimer 2009-08-23T01:09:17+00:00 David S. Miller davem@davemloft.net 2009-08-21T23:33:34+00:00 ee5f9757ea17759e1ce5503bdae2b07e48e32af9 None of this stuff should execute in hw IRQ context, therefore use a tasklet_hrtimer so that it runs in softirq context. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> 
None of this stuff should execute in hw IRQ context, therefore
use a tasklet_hrtimer so that it runs in softirq context.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
net: restore gnet_stats_basic to previous definition 2009-08-18T04:33:49+00:00 Eric Dumazet eric.dumazet@gmail.com 2009-08-16T09:36:49+00:00 c1a8f1f1c8e01eab5862c8db39b49ace814e6c66 In 5e140dfc1fe87eae27846f193086724806b33c7d "net: reorder struct Qdisc for better SMP performance" the definition of struct gnet_stats_basic changed incompatibly, as copies of this struct are shipped to userland via netlink. Restoring old behavior is not welcome, for performance reason. Fix is to use a private structure for kernel, and teach gnet_stats_copy_basic() to convert from kernel to user land, using legacy structure (struct gnet_stats_basic) Based on a report and initial patch from Michael Spang. Reported-by: Michael Spang <mspang@csclub.uwaterloo.ca> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
In 5e140dfc1fe87eae27846f193086724806b33c7d "net: reorder struct Qdisc
for better SMP performance" the definition of struct gnet_stats_basic
changed incompatibly, as copies of this struct are shipped to
userland via netlink.

Restoring old behavior is not welcome, for performance reason.

Fix is to use a private structure for kernel, and
teach gnet_stats_copy_basic() to convert from kernel to user land,
using legacy structure (struct gnet_stats_basic)

Based on a report and initial patch from Michael Spang.

Reported-by: Michael Spang <mspang@csclub.uwaterloo.ca>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2009-08-04T02:05:50+00:00 David S. Miller davem@davemloft.net 2009-08-04T02:05:50+00:00 eca4c3d2dd66d0230140c9af05dee591df6f0e42 






cfg80211: fix regression on beacon world roaming feature
2009-08-03T20:31:21+00:00

Luis R. Rodriguez
lrodriguez@atheros.com

2009-07-31T00:43:48+00:00

371842448c05b42d11a4be1c8e4e81d62ecc7534

A regression was added through patch a4ed90d6:

"cfg80211: respect API on orig_flags on channel for beacon hint"

We did indeed respect _orig flags but the intention was not clearly
stated in the commit log. This patch fixes firmware issues picked
up by iwlwifi when we lift passive scan of beaconing restrictions
on channels its EEPROM has been configured to always enable.

By doing so though we also disallowed beacon hints on devices
registering their wiphy with custom world regulatory domains
enabled, this happens to be currently ath5k, ath9k and ar9170.
The passive scan and beacon restrictions on those devices would
never be lifted even if we did find a beacon and the hardware did
support such enhancements when world roaming.

Since Johannes indicates iwlwifi firmware cannot be changed to
allow beacon hinting we set up a flag now to specifically allow
drivers to disable beacon hints for devices which cannot use them.

We enable the flag on iwlwifi to disable beacon hints and by default
enable it for all other drivers. It should be noted beacon hints lift
passive scan flags and beacon restrictions when we receive a beacon from
an AP on any 5 GHz non-DFS channels, and channels 12-14 on the 2.4 GHz
band. We don't bother with channels 1-11 as those channels are allowed
world wide.

This should fix world roaming for ath5k, ath9k and ar9170, thereby
improving scan time when we receive the first beacon from any AP,
and also enabling beaconing operation (AP/IBSS/Mesh) on cards which
would otherwise not be allowed to do so. Drivers not using custom
regulatory stuff (wiphy_apply_custom_regulatory()) were not affected
by this as the orig_flags for the channels would have been cleared
upon wiphy registration.

I tested this with a world roaming ath5k card.

Cc: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>





A regression was added through patch a4ed90d6:

"cfg80211: respect API on orig_flags on channel for beacon hint"

We did indeed respect _orig flags but the intention was not clearly
stated in the commit log. This patch fixes firmware issues picked
up by iwlwifi when we lift passive scan of beaconing restrictions
on channels its EEPROM has been configured to always enable.

By doing so though we also disallowed beacon hints on devices
registering their wiphy with custom world regulatory domains
enabled, this happens to be currently ath5k, ath9k and ar9170.
The passive scan and beacon restrictions on those devices would
never be lifted even if we did find a beacon and the hardware did
support such enhancements when world roaming.

Since Johannes indicates iwlwifi firmware cannot be changed to
allow beacon hinting we set up a flag now to specifically allow
drivers to disable beacon hints for devices which cannot use them.

We enable the flag on iwlwifi to disable beacon hints and by default
enable it for all other drivers. It should be noted beacon hints lift
passive scan flags and beacon restrictions when we receive a beacon from
an AP on any 5 GHz non-DFS channels, and channels 12-14 on the 2.4 GHz
band. We don't bother with channels 1-11 as those channels are allowed
world wide.

This should fix world roaming for ath5k, ath9k and ar9170, thereby
improving scan time when we receive the first beacon from any AP,
and also enabling beaconing operation (AP/IBSS/Mesh) on cards which
would otherwise not be allowed to do so. Drivers not using custom
regulatory stuff (wiphy_apply_custom_regulatory()) were not affected
by this as the orig_flags for the channels would have been cleared
upon wiphy registration.

I tested this with a world roaming ath5k card.

Cc: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>







bluetooth: rfcomm_init bug fix
2009-08-03T20:24:39+00:00

Dave Young
hidave.darkstar@gmail.com

2009-08-03T04:26:16+00:00

af0d3b103bcfa877343ee338de12002cd50c9ee5

rfcomm tty may be used before rfcomm_tty_driver initilized,
The problem is that now socket layer init before tty layer, if userspace
program do socket callback right here then oops will happen.

reporting in:
http://marc.info/?l=linux-bluetooth&m=124404919324542&w=2

make 3 changes:
1. remove #ifdef in rfcomm/core.c,
make it blank function when rfcomm tty not selected in rfcomm.h

2. tune the rfcomm_init error patch to ensure
tty driver initilized before rfcomm socket usage.

3. remove __exit for rfcomm_cleanup_sockets
because above change need call it in a __init function.

Reported-by: Oliver Hartkopp <oliver@hartkopp.net>
Tested-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>





rfcomm tty may be used before rfcomm_tty_driver initilized,
The problem is that now socket layer init before tty layer, if userspace
program do socket callback right here then oops will happen.

reporting in:
http://marc.info/?l=linux-bluetooth&m=124404919324542&w=2

make 3 changes:
1. remove #ifdef in rfcomm/core.c,
make it blank function when rfcomm tty not selected in rfcomm.h

2. tune the rfcomm_init error patch to ensure
tty driver initilized before rfcomm socket usage.

3. remove __exit for rfcomm_cleanup_sockets
because above change need call it in a __init function.

Reported-by: Oliver Hartkopp <oliver@hartkopp.net>
Tested-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>







NET: ROSE: Don't use static buffer.
2009-07-27T02:11:14+00:00

Ralf Baechle
ralf@linux-mips.org

2009-07-27T02:11:14+00:00

dcf777f6ed9799c5ac90ac17a5c369e6b73ca92e

The use of a static buffer in rose2asc() to return its result is not
threadproof and can result in corruption if multiple threads are trying
to use one of the procfs files based on rose2asc().

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>





The use of a static buffer in rose2asc() to return its result is not
threadproof and can result in corruption if multiple threads are trying
to use one of the procfs files based on rose2asc().

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>