linux-toradex.git/include/net, branch v5.1-rc3

net/sched: let actions use RCU to access 'goto_chain'

2019-03-21T20:26:42+00:00

use RCU when accessing the action chain, to avoid use after free in the
traffic path when 'goto chain' is replaced on existing TC actions (see
script below). Since the control action is read in the traffic path
without holding the action spinlock, we need to explicitly ensure that
a->goto_chain is not NULL before dereferencing (i.e it's not sufficient
to rely on the value of TC_ACT_GOTO_CHAIN bits). Not doing so caused NULL
dereferences in tcf_action_goto_chain_exec() when the following script:

 # tc chain add dev dd0 chain 42 ingress protocol ip flower \
 > ip_proto udp action pass index 4
 # tc filter add dev dd0 ingress protocol ip flower \
 > ip_proto udp action csum udp goto chain 42 index 66
 # tc chain del dev dd0 chain 42 ingress
 (start UDP traffic towards dd0)
 # tc action replace action csum udp pass index 66

was run repeatedly for several hours.

Suggested-by: Cong Wang 
Suggested-by: Vlad Buslov 
Signed-off-by: Davide Caratti 
Signed-off-by: David S. Miller

net/sched: don't dereference a->goto_chain to read the chain index

2019-03-21T20:26:42+00:00

callers of tcf_gact_goto_chain_index() can potentially read an old value
of the chain index, or even dereference a NULL 'goto_chain' pointer,
because 'goto_chain' and 'tcfa_action' are read in the traffic path
without caring of concurrent write in the control path. The most recent
value of chain index can be read also from a->tcfa_action (it's encoded
there together with TC_ACT_GOTO_CHAIN bits), so we don't really need to
dereference 'goto_chain': just read the chain id from the control action.

Fixes: e457d86ada27 ("net: sched: add couple of goto_chain helpers")
Signed-off-by: Davide Caratti 
Signed-off-by: David S. Miller

net/sched: prepare TC actions to properly validate the control action

2019-03-21T20:26:41+00:00

- pass a pointer to struct tcf_proto in each actions's init() handler,
  to allow validating the control action, checking whether the chain
  exists and (eventually) refcounting it.
- remove code that validates the control action after a successful call
  to the action's init() handler, and replace it with a test that forbids
  addition of actions having 'goto_chain' and NULL goto_chain pointer at
  the same time.
- add tcf_action_check_ctrlact(), that will validate the control action
  and eventually allocate the action 'goto_chain' within the init()
  handler.
- add tcf_action_set_ctrlact(), that will assign the control action and
  swap the current 'goto_chain' pointer with the new given one.

This disallows 'goto_chain' on actions that don't initialize it properly
in their init() handler, i.e. calling tcf_action_check_ctrlact() after
successful IDR reservation and then calling tcf_action_set_ctrlact()
to assign 'goto_chain' and 'tcf_action' consistently.

By doing this, the kernel does not leak anymore refcounts when a valid
'goto chain' handle is replaced in TC actions, causing kmemleak splats
like the following one:

 # tc chain add dev dd0 chain 42 ingress protocol ip flower \
 > ip_proto tcp action drop
 # tc chain add dev dd0 chain 43 ingress protocol ip flower \
 > ip_proto udp action drop
 # tc filter add dev dd0 ingress matchall \
 > action gact goto chain 42 index 66
 # tc filter replace dev dd0 ingress matchall \
 > action gact goto chain 43 index 66
 # echo scan >/sys/kernel/debug/kmemleak
 <...>
 unreferenced object 0xffff93c0ee09f000 (size 1024):
 comm "tc", pid 2565, jiffies 4295339808 (age 65.426s)
 hex dump (first 32 bytes):
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
   00 00 00 00 08 00 06 00 00 00 00 00 00 00 00 00  ................
 backtrace:
   [<000000009b63f92d>] tc_ctl_chain+0x3d2/0x4c0
   [<00000000683a8d72>] rtnetlink_rcv_msg+0x263/0x2d0
   [<00000000ddd88f8e>] netlink_rcv_skb+0x4a/0x110
   [<000000006126a348>] netlink_unicast+0x1a0/0x250
   [<00000000b3340877>] netlink_sendmsg+0x2c1/0x3c0
   [<00000000a25a2171>] sock_sendmsg+0x36/0x40
   [<00000000f19ee1ec>] ___sys_sendmsg+0x280/0x2f0
   [<00000000d0422042>] __sys_sendmsg+0x5e/0xa0
   [<000000007a6c61f9>] do_syscall_64+0x5b/0x180
   [<00000000ccd07542>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
   [<0000000013eaa334>] 0xffffffffffffffff

Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti 
Signed-off-by: David S. Miller

sctp: get sctphdr by offset in sctp_compute_cksum

2019-03-19T01:16:12+00:00

sctp_hdr(skb) only works when skb->transport_header is set properly.

But in Netfilter, skb->transport_header for ipv6 is not guaranteed
to be right value for sctphdr. It would cause to fail to check the
checksum for sctp packets.

So fix it by using offset, which is always right in all places.

v1->v2:
  - Fix the changelog.

Fixes: e6d8b64b34aa ("net: sctp: fix and consolidate SCTP checksumming code")
Reported-by: Li Shuang 
Signed-off-by: Xin Long 
Signed-off-by: David S. Miller

packets: Always register packet sk in the same order

2019-03-19T00:58:39+00:00

When using fanouts with AF_PACKET, the demux functions such as
fanout_demux_cpu will return an index in the fanout socket array, which
corresponds to the selected socket.

The ordering of this array depends on the order the sockets were added
to a given fanout group, so for FANOUT_CPU this means sockets are bound
to cpus in the order they are configured, which is OK.

However, when stopping then restarting the interface these sockets are
bound to, the sockets are reassigned to the fanout group in the reverse
order, due to the fact that they were inserted at the head of the
interface's AF_PACKET socket list.

This means that traffic that was directed to the first socket in the
fanout group is now directed to the last one after an interface restart.

In the case of FANOUT_CPU, traffic from CPU0 will be directed to the
socket that used to receive traffic from the last CPU after an interface
restart.

This commit introduces a helper to add a socket at the tail of a list,
then uses it to register AF_PACKET sockets.

Note that this changes the order in which sockets are listed in /proc and
with sock_diag.

Fixes: dc99f600698d ("packet: Add fanout support")
Signed-off-by: Maxime Chevallier 
Acked-by: Willem de Bruijn 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

2019-03-16T19:20:08+00:00

Daniel Borkmann says:

====================
pull-request: bpf 2019-03-16

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a umem memory leak on cleanup in AF_XDP, from Björn.

2) Fix BTF to properly resolve forward-declared enums into their corresponding
   full enum definition types during deduplication, from Andrii.

3) Fix libbpf to reject invalid flags in xsk_socket__create(), from Magnus.

4) Fix accessing invalid pointer returned from bpf_tcp_sock() and
   bpf_sk_fullsock() after bpf_sk_release() was called, from Martin.

5) Fix generation of load/store DW instructions in PPC JIT, from Naveen.

6) Various fixes in BPF helper function documentation in bpf.h UAPI header
   used to bpf-helpers(7) man page, from Quentin.

7) Fix segfault in BPF test_progs when prog loading failed, from Yonghong.
====================

Signed-off-by: David S. Miller

xsk: fix umem memory leak on cleanup

2019-03-16T00:27:51+00:00

When the umem is cleaned up, the task that created it might already be
gone. If the task was gone, the xdp_umem_release function did not free
the pages member of struct xdp_umem.

It turned out that the task lookup was not needed at all; The code was
a left-over when we moved from task accounting to user accounting [1].

This patch fixes the memory leak by removing the task lookup logic
completely.

[1] https://lore.kernel.org/netdev/20180131135356.19134-3-bjorn.topel@gmail.com/

Link: https://lore.kernel.org/netdev/c1cb2ca8-6a14-3980-8672-f3de0bb38dfd@suse.cz/
Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt")
Reported-by: Jiri Slaby 
Signed-off-by: Björn Töpel 
Signed-off-by: Daniel Borkmann

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-03-14T16:28:12+00:00

Pull networking fixes from David Miller:
 "More fixes in the queue:

  1) Netfilter nat can erroneously register the device notifier twice,
     fix from Florian Westphal.

  2) Use after free in nf_tables, from Pablo Neira Ayuso.

  3) Parallel update of steering rule fix in mlx5 river, from Eli
     Britstein.

  4) RX processing panic in lan743x, fix from Bryan Whitehead.

  5) Use before initialization of TCP_SKB_CB, fix from Christoph Paasch.

  6) Fix locking in SRIOV mode of mlx4 driver, from Jack Morgenstein.

  7) Fix TX stalls in lan743x due to mishandling of interrupt ACKing
     modes, from Bryan Whitehead.

  8) Fix infoleak in l2tp_ip6_recvmsg(), from Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  pptp: dst_release sk_dst_cache in pptp_sock_destruct
  MAINTAINERS: GENET & SYSTEMPORT: Add internal Broadcom list
  l2tp: fix infoleak in l2tp_ip6_recvmsg()
  net/tls: Inform user space about send buffer availability
  net_sched: return correct value for *notify* functions
  lan743x: Fix TX Stall Issue
  net/mlx4_core: Fix qp mtt size calculation
  net/mlx4_core: Fix locking in SRIOV mode when switching between events and polling
  net/mlx4_core: Fix reset flow when in command polling mode
  mlxsw: minimal: Initialize base_mac
  mlxsw: core: Prevent duplication during QSFP module initialization
  net: dwmac-sun8i: fix a missing check of of_get_phy_mode
  net: sh_eth: fix a missing check of of_get_phy_mode
  net: 8390: fix potential NULL pointer dereferences
  net: fujitsu: fix a potential NULL pointer dereference
  net: qlogic: fix a potential NULL pointer dereference
  isdn: hfcpci: fix potential NULL pointer dereference
  Documentation: devicetree: add a new optional property for port mac address
  net: rocker: fix a potential NULL pointer dereference
  net: qlge: fix a potential NULL pointer dereference
  ...

sctp: convert to genradix

2019-03-12T17:04:02+00:00

This also makes sctp_stream_alloc_(out|in) saner, in that they no longer
allocate new flex_arrays/genradixes, they just preallocate more
elements.

This code does however have a suspicious lack of locking.

Link: http://lkml.kernel.org/r/20181217131929.11727-7-kent.overstreet@gmail.com
Signed-off-by: Kent Overstreet 
Cc: Vlad Yasevich 
Cc: Neil Horman 
Cc: Marcelo Ricardo Leitner 
Cc: Alexey Dobriyan 
Cc: Al Viro 
Cc: Dave Hansen 
Cc: Eric Paris 
Cc: Matthew Wilcox 
Cc: Paul Moore 
Cc: Pravin B Shelar 
Cc: Shaohua Li 
Cc: Stephen Smalley 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf

2019-03-11T23:14:14+00:00

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree:

1) Fix list corruption in device notifier in the masquerade
   infrastructure, from Florian Westphal.

2) Fix double-free of sets and use-after-free when deleting elements.

3) Don't bogusly return EBUSY when removing a set after flush command.

4) Use-after-free in dynamically allocate operations.

5) Don't report a new ruleset generation to userspace if transaction
   list is empty, this invalidates the userspace cache innecessarily.
   From Florian Westphal.
====================

Signed-off-by: David S. Miller