The port's actor_oper_port_state activity flag should be updated immediately
after changing the lacp_active option to reflect the current mode correctly.

Fixes: 3a755cd8b7c6 ("bonding: add new option lacp_active")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250815062000.22220-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This fixes the likes of hci_conn_num(CIS_LINK) returning the total of
ISO connection which includes BIS_LINK as well, so this splits the
iso_num into each link type and introduces hci_iso_num that can be used
in places where the total number of ISO connection still needs to be
used.

Fixes: 23205562ffc8 ("Bluetooth: separate CIS_LINK and BIS_LINK link types")
Fixes: a7bcffc673de ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

ll_privacy_capable only indicates that the controller supports the
feature but it doesnt' check that LE is enabled so it end up being
marked as active in the current settings when it shouldn't.

Fixes: ad383c2c65a5 ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

{cis,bis}_capable only indicates the controller supports the feature
since it doesn't check that LE is enabled so it shall not be used for
current setting, instead this introduces {cis,bis}_enabled macros that
can be used to indicate that these features are currently enabled.

Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Fixes: ae7533613133 ("Bluetooth: Check for ISO support in controller")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This issue applies for the following qdiscs: hhf, fq, fq_codel, and
fq_pie, and occurs in their change handlers when adjusting to the new
limit. The problem is the following in the values passed to the
subsequent qdisc_tree_reduce_backlog call given a tbf parent:

   When the tbf parent runs out of tokens, skbs of these qdiscs will
   be placed in gso_skb. Their peek handlers are qdisc_peek_dequeued,
   which accounts for both qlen and backlog. However, in the case of
   qdisc_dequeue_internal, ONLY qlen is accounted for when pulling
   from gso_skb. This means that these qdiscs are missing a
   qdisc_qstats_backlog_dec when dropping packets to satisfy the
   new limit in their change handlers.

   One can observe this issue with the following (with tc patched to
   support a limit of 0):

   export TARGET=fq
   tc qdisc del dev lo root
   tc qdisc add dev lo root handle 1: tbf rate 8bit burst 100b latency 1ms
   tc qdisc replace dev lo handle 3: parent 1:1 $TARGET limit 1000
   echo ''; echo 'add child'; tc -s -d qdisc show dev lo
   ping -I lo -f -c2 -s32 -W0.001 127.0.0.1 2>&1 >/dev/null
   echo ''; echo 'after ping'; tc -s -d qdisc show dev lo
   tc qdisc change dev lo handle 3: parent 1:1 $TARGET limit 0
   echo ''; echo 'after limit drop'; tc -s -d qdisc show dev lo
   tc qdisc replace dev lo handle 2: parent 1:1 sfq
   echo ''; echo 'post graft'; tc -s -d qdisc show dev lo

   The second to last show command shows 0 packets but a positive
   number (74) of backlog bytes. The problem becomes clearer in the
   last show command, where qdisc_purge_queue triggers
   qdisc_tree_reduce_backlog with the positive backlog and causes an
   underflow in the tbf parent's backlog (4096 Mb instead of 0).

To fix this issue, the codepath for all clients of qdisc_dequeue_internal
has been simplified: codel, pie, hhf, fq, fq_pie, and fq_codel.
qdisc_dequeue_internal handles the backlog adjustments for all cases that
do not directly use the dequeue handler.

The old fq_codel_change limit adjustment loop accumulated the arguments to
the subsequent qdisc_tree_reduce_backlog call through the cstats field.
However, this is confusing and error prone as fq_codel_dequeue could also
potentially mutate this field (which qdisc_dequeue_internal calls in the
non gso_skb case), so we have unified the code here with other qdiscs.

Fixes: 2d3cbfd6d54a ("net_sched: Flush gso_skb list too during ->change()")
Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM")
Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Signed-off-by: William Liu <will@willsroot.io>
Reviewed-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://patch.msgid.link/20250812235725.45243-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot found a race condition when kcm_unattach(psock)
and kcm_release(kcm) are executed at the same time.

kcm_unattach() is missing a check of the flag
kcm->tx_stopped before calling queue_work().

If the kcm has a reserved psock, kcm_unattach() might get executed
between cancel_work_sync() and unreserve_psock() in kcm_release(),
requeuing kcm->tx_work right before kcm gets freed in kcm_done().

Remove kcm->tx_stopped and replace it by the less
error-prone disable_work_sync().

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot+e62c9db591c30e174662@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e62c9db591c30e174662
Reported-by: syzbot+d199b52665b6c3069b94@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d199b52665b6c3069b94
Reported-by: syzbot+be6b1fdfeae512726b4e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=be6b1fdfeae512726b4e
Signed-off-by: Sven Stegemann <sven@stegemann.de>
Link: https://patch.msgid.link/20250812191810.27777-1-sven@stegemann.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
ixgbe: bypass devlink phys_port_name generation

Jedrzej adds option to skip phys_port_name generation and opts
ixgbe into it as some configurations rely on pre-devlink naming
which could end up broken as a result.

* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ixgbe: prevent from unwanted interface name changes
  devlink: let driver opt out of automatic phys_port_name generation
====================

Link: https://patch.msgid.link/20250812205226.1984369-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The estimator kthreads' affinity are defined by sysctl overwritten
preferences and applied through a plain call to the scheduler's affinity
API.

However since the introduction of managed kthreads preferred affinity,
such a practice shortcuts the kthreads core code which eventually
overwrites the target to the default unbound affinity.

Fix this with using the appropriate kthread's API.

Fixes: d1a89197589c ("kthread: Default affine kthread to its preferred NUMA node")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>

Currently when adding devlink port, phys_port_name is automatically
generated within devlink port initialization flow. As a result adding
devlink port support to driver may result in forced changes of interface
names, which breaks already existing network configs.

This is an expected behavior but in some scenarios it would not be
preferable to provide such limitation for legacy driver not being able to
keep 'pre-devlink' interface name.

Add flag no_phys_port_name to devlink_port_attrs struct which indicates
if devlink should not alter name of interface.

Suggested-by: Jiri Pirko <jiri@resnulli.us>
Link: https://lore.kernel.org/all/nbwrfnjhvrcduqzjl4a2jafnvvud6qsbxlvxaxilnryglf4j7r@btuqrimnfuly/
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Page pool can have pages "directly" (locklessly) recycled to it,
if the NAPI that owns the page pool is scheduled to run on the same CPU.
To make this safe we check that the NAPI is disabled while we destroy
the page pool. In most cases NAPI and page pool lifetimes are tied
together so this happens naturally.

The queue API expects the following order of calls:
 -> mem_alloc
    alloc new pp
 -> stop
    napi_disable
 -> start
    napi_enable
 -> mem_free
    free old pp

Here we allocate the page pool in ->mem_alloc and free in ->mem_free.
But the NAPIs are only stopped between ->stop and ->start. We created
page_pool_disable_direct_recycling() to safely shut down the recycling
in ->stop. This way the page_pool_destroy() call in ->mem_free doesn't
have to worry about recycling any more.

Unfortunately, the page_pool_disable_direct_recycling() is not enough
to deal with failures which necessitate freeing the _new_ page pool.
If we hit a failure in ->mem_alloc or ->stop the new page pool has
to be freed while the NAPI is active (assuming driver attaches the
page pool to an existing NAPI instance and doesn't reallocate NAPIs).

Freeing the new page pool is technically safe because it hasn't been
used for any packets, yet, so there can be no recycling. But the check
in napi_assert_will_not_race() has no way of knowing that. We could
check if page pool is empty but that'd make the check much less likely
to trigger during development.

Add page_pool_enable_direct_recycling(), pairing with
page_pool_disable_direct_recycling(). It will allow us to create the new
page pools in "disabled" state and only enable recycling when we know
the reconfig operation will not fail.

Coincidentally it will also let us re-enable the recycling for the old
pool, if the reconfig failed:

 -> mem_alloc (new)
 -> stop (old)
    # disables direct recycling for old
 -> start (new)
    # fail!!
 -> start (old)
    # go back to old pp but direct recycling is lost :(
 -> mem_free (new)

The new helper is idempotent to make the life easier for drivers,
which can operate in HDS mode and support zero-copy Rx.
The driver can call the helper twice whether there are two pools
or it has multiple references to a single pool.

Fixes: 40eca00ae605 ("bnxt_en: unlink page pool when stopping Rx queue")
Tested-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250805003654.2944974-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>