linux-toradex.git/include/rdma/ib_addr.h, branch v4.4.5

IB/addr: Pass network namespace as a parameter

2015-10-28T16:32:47+00:00

Add network namespace support to the ib_addr module. For that, all the
address resolution and matching should be done using the appropriate
namespace instead of init_net.

This is achieved by:

1. Adding an explicit network namespace argument to exported function that
   require a namespace.
2. Saving the namespace in the rdma_addr_client structure.
3. Using it when calling networking functions.

In order to preserve the behavior of calling modules, &init_net is
passed as the parameter in calls from other modules. This is modified as
namespace support is added on more levels.

Signed-off-by: Haggai Eran 
Signed-off-by: Yotam Kenneth 
Signed-off-by: Shachar Raindel 
Signed-off-by: Guy Shapiro 
Signed-off-by: Doug Ledford

IB/core: Use GID table in AH creation and dmac resolution

2015-10-22T03:48:17+00:00

Previously, vlan id and source MAC were used from QP attributes. Since
the net device is now stored in the GID attributes, they could be used
instead of getting this information from the QP attributes.

IB_QP_SMAC, IB_QP_ALT_SMAC, IB_QP_VID and IB_QP_ALT_VID were removed
because there is no known libibverbs that uses them.

This commit also modifies the vendors (mlx4, ocrdma) drivers in order
to use the new approach.

ocrdma driver changes were done by Somnath Kotur 

Signed-off-by: Matan Barak 
Signed-off-by: Doug Ledford

IB/core cleanup: Add const to args - agent_send_response

2015-06-02T13:33:13+00:00

In order to support constant callers of agent_send_response we add const
specifiers to the its pointer arguments.

Adjust the call tree accordingly.

Signed-off-by: Ira Weiny 
Reviewed-by: Hal Rosenstock 
Reviewed-by: Jason Gunthorpe 
Signed-off-by: Doug Ledford

IB/core: change rdma_gid2ip into void function as it always return zero

2015-05-05T17:21:27+00:00

Signed-off-by: Honggang Li 
Acked-by: Sean Hefty 
Signed-off-by: Doug Ledford

IB/cma: IBoE (RoCE) IP-based GID addressing

2014-01-18T22:12:35+00:00

Currently, the IB core and specifically the RDMA-CM assumes that IBoE
(RoCE) gids encode related Ethernet netdevice interface MAC address
and possibly VLAN id.

Change GIDs to be treated as they encode interface IP address.

Since Ethernet layer 2 address parameters are not longer encoded
within gids, we have to extend the Infiniband address structures (e.g.
ib_ah_attr) with layer 2 address parameters, namely mac and vlan.

Signed-off-by: Moni Shoua 
Signed-off-by: Or Gerlitz 
Signed-off-by: Roland Dreier

IB/core: Ethernet L2 attributes in verbs/cm structures

2014-01-14T22:20:54+00:00

This patch add the support for Ethernet L2 attributes in the
verbs/cm/cma structures.

When dealing with L2 Ethernet, we should use smac, dmac, vlan ID and priority
in a similar manner that the IB L2 (and the L4 PKEY) attributes are used.

Thus, those attributes were added to the following structures:

* ib_ah_attr - added dmac
* ib_qp_attr - added smac and vlan_id, (sl remains vlan priority)
* ib_wc - added smac, vlan_id
* ib_sa_path_rec - added smac, dmac, vlan_id
* cm_av - added smac and vlan_id

For the path record structure, extra care was taken to avoid the new
fields when packing it into wire format, so we don't break the IB CM
and SA wire protocol.

On the active side, the CM fills. its internal structures from the
path provided by the ULP.  We add there taking the ETH L2 attributes
and placing them into the CM Address Handle (struct cm_av).

On the passive side, the CM fills its internal structures from the WC
associated with the REQ message.  We add there taking the ETH L2
attributes from the WC.

When the HW driver provides the required ETH L2 attributes in the WC,
they set the IB_WC_WITH_SMAC and IB_WC_WITH_VLAN flags. The IB core
code checks for the presence of these flags, and in their absence does
address resolution from the ib_init_ah_from_wc() helper function.

ib_modify_qp_is_ok is also updated to consider the link layer. Some
parameters are mandatory for Ethernet link layer, while they are
irrelevant for IB.  Vendor drivers are modified to support the new
function signature.

Signed-off-by: Matan Barak 
Signed-off-by: Or Gerlitz 
Signed-off-by: Roland Dreier

IB/addr: Add AF_IB support to ip_addr_size

2013-06-20T20:08:02+00:00

Add support for AF_IB to ip_addr_size, and rename the function to
account for the change.  Give the compiler more control over whether
the call should be inline or not by moving the definition into the .c
file, removing the static inline, and exporting it.

Signed-off-by: Sean Hefty 
Signed-off-by: Roland Dreier

rdma/core: Fix sparse warnings

2012-01-04T17:17:45+00:00

Clean up sparse warnings in the rdma core layer.

Signed-off-by: Sean Hefty 
Signed-off-by: Roland Dreier

net: consolidate and fix ethtool_ops->get_settings calling

2011-09-15T21:32:26+00:00

This patch does several things:
- introduces __ethtool_get_settings which is called from ethtool code and
  from drivers as well. Put ASSERT_RTNL there.
- dev_ethtool_get_settings() is replaced by __ethtool_get_settings()
- changes calling in drivers so rtnl locking is respected. In
  iboe_get_rate was previously ->get_settings() called unlocked. This
  fixes it. Also prb_calc_retire_blk_tmo() in af_packet.c had the same
  problem. Also fixed by calling __dev_get_by_index() instead of
  dev_get_by_index() and holding rtnl_lock for both calls.
- introduces rtnl_lock in bnx2fc_vport_create() and fcoe_vport_create()
  so bnx2fc_if_create() and fcoe_if_create() are called locked as they
  are from other places.
- use __ethtool_get_settings() in bonding code

Signed-off-by: Jiri Pirko 

v2->v3:
	-removed dev_ethtool_get_settings()
	-added ASSERT_RTNL into __ethtool_get_settings()
	-prb_calc_retire_blk_tmo - use __dev_get_by_index() and lock
	 around it and __ethtool_get_settings() call
v1->v2:
        add missing export_symbol
Reviewed-by: Ben Hutchings  [except FCoE bits]
Acked-by: Ralf Baechle 
Signed-off-by: David S. Miller

ethtool: Call ethtool's get/set_settings callbacks with cleaned data

2011-04-29T21:01:30+00:00

This makes sure that when a driver calls the ethtool's
get/set_settings() callback of another driver, the data passed to it
is clean. This guarantees that speed_hi will be zeroed correctly if
the called callback doesn't explicitely set it: we are sure we don't
get a corrupted speed from the underlying driver. We also take care of
setting the cmd field appropriately (ETHTOOL_GSET/SSET).

This applies to dev_ethtool_get_settings(), which now makes sure it
sets up that ethtool command parameter correctly before passing it to
drivers. This also means that whoever calls dev_ethtool_get_settings()
does not have to clean the ethtool command parameter. This function
also becomes an exported symbol instead of an inline.

All drivers visible to make allyesconfig under x86_64 have been
updated.

Signed-off-by: David Decotigny 
Signed-off-by: David S. Miller