Change struct ib_class_port_info to conform to IB Spec 1.3
That in order to get specific capability mask from ClassPortInfo mad.

>From the IB Spec, ClassPortInfo section:
        "CapabilityMask2 Bits 0-26: Additional class-specific capabilities...
         RespTimeValue the rest 5 bits"

The new struct now has one field for capabilitymask2 (previously was the
reserved field) and the resp_time field.

And it fixes up qib and srpt, use of the field repurposed to be used as
capabilitymask2:
IB/qib: Change pma_get_classportinfo
IB/srpt: Adjust the use of ib_class_port_info

Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

In ib_mad.h, ib_mad_snoop_handler uses send_buf rather than send_wr

Signed-off-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Stop abusing wr_id and just pass the parameter explicitly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Receipt of CM MAD with other than the Send method for an attribute
other than the ClassPortInfo attribute is invalid.

CM attributes other than ClassPortInfo only use the send method.

The SRP initiator does not maintain a timeout policy for CM connect
requests relies on the CM layer to do that. The result was that
the SRP initiator hung as the connect request never completed.

A new SRP target has been observed to respond to Send CM REQ
with GetResp of CM REQ with bad status. This is non conformant
with IBA spec but exposes a vulnerability in the current MAD/CM
code which will respond to the incoming GetResp of CM REQ as if
it was a valid incoming Send of CM REQ rather than tossing
this on the floor. It also causes the MAD layer not to
retransmit the original REQ even though it has not received a REP.

Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

When the hfi1 driver was added these definitions were moved from the qib driver
to ib_mad.h to be used by both qib and hfi1.  They should have been moved to
ib_smi.h instead.

Fixes: d4ab347005fb ("IB/core: Add core header changes needed for OPA")
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Remove the unused IB_NOTICE_REPRESS_* defines.

When the hfi1 driver was added these definitions were moved from the qib driver
to ib_mad.h.  They should have been removed instead.

Fixes: d4ab347005fb ("IB/core: Add core header changes needed for OPA")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The pd now has a local_dma_lkey member which completely replaces
ib_get_dma_mr, use it instead.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

This patch adds the value of the CNP opcode to the existing list of enumerated
opcodes in ib_pack.h

Add common OPA header definitions for driver
build:
- opa_port_info.h
- opa_smi.h
- hfi1_user.h

Additionally, ib_mad.h, has additional definitions
that are common to ib_drivers including:
- trap support
- cca support

The qib driver has the duplication removed in favor
those in ib_mad.h

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: John, Jubin <jubin.john@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

For devices which support OPA MADs

   1) Use previously defined SMP support functions.

   2) Pass correct base version to ib_create_send_mad when processing OPA MADs.

   3) Process out_mad_key_index returned by agents for a response.  This is
      necessary because OPA SMP packets must carry a valid pkey.

   4) Carry the correct segment size (OPA vs IBTA) of RMPP messages within
      ib_mad_recv_wc.

   5) Handle variable length OPA MADs by:

        * Adjusting the 'fake' WC for locally routed SMP's to represent the
          proper incoming byte_len
        * out_mad_size is used from the local HCA agents
                1) when sending agent responses on the wire
                2) when passing responses through the local_completions
		   function

	NOTE: wc.byte_len includes the GRH length and therefore is different
	      from the in_mad_size specified to the local HCA agents.
	      out_mad_size should _not_ include the GRH length as it is added

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

This patch is the first of 3 which adds processing of OPA MADs

1) Add Intel Omni-Path Architecture defines
2) Increase max management version to accommodate OPA
3) update ib_create_send_mad
	If the device supports OPA MADs and the MAD being sent is the OPA base
	version alter the MAD size and sg lengths as appropriate

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>