linux-toradex.git/include/scsi/sas_ata.h, branch v6.1

scsi: libsas: Refactor sas_ata_hard_reset()

2022-05-20T00:16:25+00:00

Create function sas_ata_wait_after_reset() from sas_ata_hard_reset() as
some LLDDs may want to check for a remote ATA phy is up after reset.

Link: https://lore.kernel.org/r/1652354134-171343-2-git-send-email-john.garry@huawei.com
Tested-by: Yihang Li 
Reviewed-by: Xiang Chen 
Signed-off-by: John Garry 
Signed-off-by: Martin K. Petersen

scsi: libsas: Add sas_execute_ata_cmd()

2022-02-23T02:11:02+00:00

Add a function to execute an ATA command using the TMF code, and use in the
hisi_sas driver. That driver needs to be able to issue the command on a
specific phy, so add an interface for that.

With that, hisi_sas_exec_internal_tmf_task() may be deleted.

Link: https://lore.kernel.org/r/1645534259-27068-19-git-send-email-john.garry@huawei.com
Tested-by: Yihang Li 
Tested-by: Damien Le Moal 
Reviewed-by: Christoph Hellwig 
Signed-off-by: John Garry 
Signed-off-by: Martin K. Petersen

scsi: libsas: Remove unused parameter for function sas_ata_eh()

2022-02-11T22:13:29+00:00

Input parameter work_q is not unused in function sas_ata_eh(), so remove
it.

Link: https://lore.kernel.org/r/1644561778-183074-4-git-send-email-chenxiang66@hisilicon.com
Reviewed-by: John Garry 
Signed-off-by: Xiang Chen 
Signed-off-by: Martin K. Petersen

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

2019-05-30T18:26:35+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Richard Fontana 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman

[SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type

2013-05-10T14:47:52+00:00

These enums have been separate since the dawn of SAS, mainly because the
latter is a procotol only enum and the former includes additional state
for libsas.  The dichotomy causes endless confusion about which one you
should use where and leads to pointless warnings like this:

drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo':
drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare]

Fix by eliminating one of them.  The one kept is effectively the sas.h
one, but call it sas_device_type and make sure the enums are all
properly namespaced with the SAS_ prefix.

Signed-off-by: James Bottomley

[SCSI] libsas: suspend / resume support

2012-08-24T09:10:23+00:00

libsas power management routines to suspend and recover the sas domain
based on a model where the lldd is allowed and expected to be
"forgetful".

sas_suspend_ha - disable event processing allowing the lldd to take down
                 links without concern for causing hotplug events.
                 Regardless of whether the lldd actually posts link down
                 messages libsas notifies the lldd that all
                 domain_devices are gone.

sas_prep_resume_ha - on the way back up before the lldd starts link
                     training clean out any spurious events that were
                     generated on the way down, and re-enable event
                     processing

sas_resume_ha - after the lldd has started and decided that all phys
		have posted link-up events this routine is called to let
		libsas start it's own timeout of any phys that did not
		resume.  After the timeout an lldd can cancel the
                phy teardown by posting a link-up event.

Storage for ex_change_count (u16) and phy_change_count (u8) are changed
to int so they can be set to -1 to indicate 'invalidated'.

Signed-off-by: Dan Williams 
Reviewed-by: Jacek Danecki 
Tested-by: Maciej Patelczyk 
Acked-by: Alan Stern 
Signed-off-by: James Bottomley

[SCSI] libata, libsas: introduce sched_eh and end_eh port ops

2012-07-20T07:58:45+00:00

When managing shost->host_eh_scheduled libata assumes that there is a
1:1 shost-to-ata_port relationship.  libsas creates a 1:N relationship
so it needs to manage host_eh_scheduled cumulatively at the host level.
The sched_eh and end_eh port port ops allow libsas to track when domain
devices enter/leave the "eh-pending" state under ha->lock (previously
named ha->state_lock, but it is no longer just a lock for ha->state
changes).

Since host_eh_scheduled indicates eh without backing commands pinning
the device it can be deallocated at any time.  Move the taking of the
domain_device reference under the port_lock to guarantee that the
ata_port stays around for the duration of eh.

Reviewed-by: Jacek Danecki 
Acked-by: Jeff Garzik 
Signed-off-by: Dan Williams 
Signed-off-by: James Bottomley

[SCSI] libsas, libata: fix start of life for a sas ata_port

2012-04-23T11:11:47+00:00

This changes the ordering of initialization and probing events from:
  1/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN
  2/ allocate ata_port and schedule port probe in DISCE_PROBE
...to:
  1/ allocate ata_port in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN
  2/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN
  3/ schedule port probe in DISCE_PROBE

This ordering prevents PHYE_SIGNAL_LOSS_EVENTS from sneaking in to
destrory ata devices before they have been fully initialized:

  BUG: unable to handle kernel paging request at 0000000000003b10
  IP: [] sas_ata_end_eh+0x12/0x5e [libsas]
  ...
  [] sas_unregister_common_dev+0x78/0xc9 [libsas]
  [] sas_unregister_dev+0x4f/0xad [libsas]
  [] sas_unregister_domain_devices+0x7f/0xbf [libsas]
  [] sas_deform_port+0x61/0x1b8 [libsas]
  [] sas_phye_loss_of_signal+0x29/0x2b [libsas]

...and kills the awkward "sata domain_device briefly existing in the
domain without an ata_port" state.

Reported-by: Michal Kosciowski 
Signed-off-by: Dan Williams 
Acked-by: Jeff Garzik 
Signed-off-by: James Bottomley

[SCSI] libsas: async ata scanning

2012-02-29T21:35:41+00:00

libsas ata error handling is already async but this does not help the
scan case.  Move initial link recovery out from under host->scan_mutex,
and delay synchronization with eh until after all port probe/recovery
work has been queued.

Device ordering is maintained with scan order by still calling
sas_rphy_add() in order of domain discovery.

Since we now scan the domain list when invoking libata-eh we need to be
careful to check for fully initialized ata ports.

Acked-by: Jack Wang 
Acked-by: Jeff Garzik 
Signed-off-by: Dan Williams 
Signed-off-by: James Bottomley

[SCSI] libsas: restore scan order

2012-02-29T21:34:19+00:00

ata devices are always scanned after ssp.  Prior to the ata error
handling reworks libsas would tend to scan devices in ascending expander
phy order.  Restore this ordering by deferring ssp discovery to a
DISCE_PROBE event, and keep the probe order consistent with the
discovery order, not the placement of sata devices.

Signed-off-by: Dan Williams 
Signed-off-by: James Bottomley