linux-toradex.git/include/scsi, branch v3.14.3 Linux kernel for Apalis and Colibri modules Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending 2014-01-31T23:31:23+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-01-31T23:31:23+00:00 4e13c5d0212f25d69a97606b9d5a85edb52a7737 Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - add support for SCSI Referrals (Hannes) - add support for T10 DIF into target core (nab + mkp) - add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab) - add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab) - prep changes to iser-target for >= v3.15 T10 DIF support (Sagi) - add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn) - allow percpu_ida_alloc() to receive task state bitmask (Kent) - fix >= v3.12 iscsi-target session reset hung task regression (nab) - fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab) - fix a long-standing network portal creation race (Andy)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits) target: Fix percpu_ref_put race in transport_lun_remove_cmd target/iscsi: Fix network portal creation race target: Report bad sector in sense data for DIF errors iscsi-target: Convert gfp_t parameter to task state bitmask iscsi-target: Fix connection reset hang with percpu_ida_alloc percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask iscsi-target: Pre-allocate more tags to avoid ack starvation qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO. qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine IB/isert: Move fastreg descriptor creation to a function IB/isert: Avoid frwr notation, user fastreg IB/isert: seperate connection protection domains and dma MRs tcm_loop: Enable DIF/DIX modes in SCSI host LLD target/rd: Add DIF protection into rd_execute_rw target/rd: Add support for protection SGL setup + release target/rd: Refactor rd_build_device_space + rd_release_device_space target/file: Add DIF protection support to fd_execute_rw target/file: Add DIF protection init/format support ... 
Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

  - add support for SCSI Referrals (Hannes)
  - add support for T10 DIF into target core (nab + mkp)
  - add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab)
  - add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab)
  - prep changes to iser-target for >= v3.15 T10 DIF support (Sagi)
  - add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn)
  - allow percpu_ida_alloc() to receive task state bitmask (Kent)
  - fix >= v3.12 iscsi-target session reset hung task regression (nab)
  - fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab)
  - fix a long-standing network portal creation race (Andy)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits)
  target: Fix percpu_ref_put race in transport_lun_remove_cmd
  target/iscsi: Fix network portal creation race
  target: Report bad sector in sense data for DIF errors
  iscsi-target: Convert gfp_t parameter to task state bitmask
  iscsi-target: Fix connection reset hang with percpu_ida_alloc
  percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask
  iscsi-target: Pre-allocate more tags to avoid ack starvation
  qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport
  qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO.
  qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure
  IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine
  IB/isert: Move fastreg descriptor creation to a function
  IB/isert: Avoid frwr notation, user fastreg
  IB/isert: seperate connection protection domains and dma MRs
  tcm_loop: Enable DIF/DIX modes in SCSI host LLD
  target/rd: Add DIF protection into rd_execute_rw
  target/rd: Add support for protection SGL setup + release
  target/rd: Refactor rd_build_device_space + rd_release_device_space
  target/file: Add DIF protection support to fd_execute_rw
  target/file: Add DIF protection init/format support
  ...
Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd 2014-01-28T18:57:14+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-01-28T18:57:14+00:00 08d21b5f93eb92a781daea71b6fcb3a340909141 Pull exofs and ore fixes from Boaz Harrosh: "The main fix here, the first patch, is also destined for -stable. The rest is small trivia and cosmetics. The ORE patches effect both exofs and pnfs-objects very reproducible bugs" [ ORE is "object raid engine", used by exofs and pnfs - Linus ] * 'for-linus' of git://git.open-osd.org/linux-open-osd: exofs: Print less in r4w exofs: Allow corrupted directory entry to be empty file exofs: Allow O_DIRECT open ore: Don't crash on NULL bio in _clear_bio ore: Fix wrong math in allocation of per device BIO 
Pull exofs and ore fixes from Boaz Harrosh:
 "The main fix here, the first patch, is also destined for -stable.  The
  rest is small trivia and cosmetics.  The ORE patches effect both exofs
  and pnfs-objects very reproducible bugs"

[ ORE is "object raid engine", used by exofs and pnfs  - Linus ]

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  exofs: Print less in r4w
  exofs: Allow corrupted directory entry to be empty file
  exofs: Allow O_DIRECT open
  ore: Don't crash on NULL bio in _clear_bio
  ore: Fix wrong math in allocation of per device BIO
Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband 2014-01-25T01:18:32+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-01-25T01:18:32+00:00 8e585a6c4abdef8562308f3f307aeea6cf168e8b Pull infiniband updates from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.14: - Flow steering for InfiniBand UD traffic - IP-based addressing for IBoE aka RoCE - Pass SRP submaintainership from Dave to Bart - SRP transport fixes from Bart - Add the new Cisco usNIC low-level device driver - Various other fixes" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (75 commits) IB/mlx5: Verify reserved fields are cleared IB/mlx5: Remove old field for create mkey mailbox IB/mlx5: Abort driver cleanup if teardown hca fails IB/mlx5: Allow creation of QPs with zero-length work queues mlx5_core: Fix PowerPC support mlx5_core: Improve debugfs readability IB/mlx5: Add support for resize CQ IB/mlx5: Implement modify CQ IB/mlx5: Make sure doorbell record is visible before doorbell mlx5_core: Use mlx5 core style warning IB/mlx5: Clear out struct before create QP command mlx5_core: Fix out arg size in access_register command RDMA/nes: Slight optimization of Ethernet address compare IB/qib: Fix QP check when looping back to/from QP1 RDMA/cxgb4: Fix gcc warning on 32-bit arch IB/usnic: Remove unused includes of <linux/version.h> RDMA/amso1100: Add check if cache memory was allocated before freeing it IPoIB: Report operstate consistently when brought up without a link IB/core: Fix unused variable warning RDMA/cma: Handle global/non-linklocal IPv6 addresses in cma_check_linklocal() ... 
Pull infiniband updates from Roland Dreier:
 "Main batch of InfiniBand/RDMA changes for 3.14:
   - Flow steering for InfiniBand UD traffic
   - IP-based addressing for IBoE aka RoCE
   - Pass SRP submaintainership from Dave to Bart
   - SRP transport fixes from Bart
   - Add the new Cisco usNIC low-level device driver
   - Various other fixes"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (75 commits)
  IB/mlx5: Verify reserved fields are cleared
  IB/mlx5: Remove old field for create mkey mailbox
  IB/mlx5: Abort driver cleanup if teardown hca fails
  IB/mlx5: Allow creation of QPs with zero-length work queues
  mlx5_core: Fix PowerPC support
  mlx5_core: Improve debugfs readability
  IB/mlx5: Add support for resize CQ
  IB/mlx5: Implement modify CQ
  IB/mlx5: Make sure doorbell record is visible before doorbell
  mlx5_core: Use mlx5 core style warning
  IB/mlx5: Clear out struct before create QP command
  mlx5_core: Fix out arg size in access_register command
  RDMA/nes: Slight optimization of Ethernet address compare
  IB/qib: Fix QP check when looping back to/from QP1
  RDMA/cxgb4: Fix gcc warning on 32-bit arch
  IB/usnic: Remove unused includes of <linux/version.h>
  RDMA/amso1100: Add check if cache memory was allocated before freeing it
  IPoIB: Report operstate consistently when brought up without a link
  IB/core: Fix unused variable warning
  RDMA/cma: Handle global/non-linklocal IPv6 addresses in cma_check_linklocal()
  ...
ore: Fix wrong math in allocation of per device BIO 2014-01-23T08:55:03+00:00 Boaz Harrosh bharrosh@panasas.com 2013-11-21T15:58:08+00:00 aad560b7f63b495f48a7232fd086c5913a676e6f At IO preparation we calculate the max pages at each device and allocate a BIO per device of that size. The calculation was wrong on some unaligned corner cases offset/length combination and would make prepare return with -ENOMEM. This would be bad for pnfs-objects that would in that case IO through MDS. And fatal for exofs were it would fail writes with EIO. Fix it by doing the proper math, that will work in all cases. (I ran a test with all possible offset/length combinations this time round). Also when reading we do not need to allocate for the parity units since we jump over them. Also lower the max_io_length to take into account the parity pages so not to allocate BIOs bigger than PAGE_SIZE CC: Stable Kernel <stable@vger.kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> 
At IO preparation we calculate the max pages at each device and
allocate a BIO per device of that size. The calculation was wrong
on some unaligned corner cases offset/length combination and would
make prepare return with -ENOMEM. This would be bad for pnfs-objects
that would in that case IO through MDS. And fatal for exofs were it
would fail writes with EIO.

Fix it by doing the proper math, that will work in all cases. (I
ran a test with all possible offset/length combinations this time
round).

Also when reading we do not need to allocate for the parity units
since we jump over them.

Also lower the max_io_length to take into account the parity pages
so not to allocate BIOs bigger than PAGE_SIZE

CC: Stable Kernel <stable@vger.kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
scsi_transport_srp: Fix kernel-doc warnings 2014-01-21T18:46:17+00:00 Bart Van Assche bvanassche@acm.org 2014-01-13T11:39:35+00:00 0c7f82189d2249153ee302fe4d02de15f165d220 The following command has been used to verify that the kernel-doc tool no longer complains about undocumented fields: scripts/kernel-doc -html drivers/scsi/scsi_transport_srp.c \ include/scsi/scsi_transport_srp.h >srp-transport-doc.html Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Sebastian Riemer <sebastian.riemer@profitbricks.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Roland Dreier <roland@purestorage.com> 
The following command has been used to verify that the kernel-doc
tool no longer complains about undocumented fields:

    scripts/kernel-doc -html drivers/scsi/scsi_transport_srp.c \
      include/scsi/scsi_transport_srp.h >srp-transport-doc.html

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Sebastian Riemer <sebastian.riemer@profitbricks.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
scsi_transport_srp: Fix a race condition 2014-01-21T18:46:17+00:00 Bart Van Assche bvanassche@acm.org 2013-12-11T16:06:14+00:00 93079162bf0ed2934c7b0c3ee93ba894df8fb3cd The rport timers must be stopped before the SRP initiator destroys the resources associated with the SCSI host. This is necessary because otherwise the callback functions invoked from the SRP transport layer could trigger a use-after-free. Stopping the rport timers before invoking scsi_remove_host() can trigger long delays in the SCSI error handler if a transport layer failure occurs while scsi_remove_host() is in progress. Hence move the code for stopping the rport timers from srp_rport_release() into a new function and invoke that function after scsi_remove_host() has finished. This patch fixes the following sporadic kernel crash: kernel BUG at include/asm-generic/dma-mapping-common.h:64! invalid opcode: 0000 [#1] SMP RIP: 0010:[<ffffffffa03b20b1>] [<ffffffffa03b20b1>] srp_unmap_data+0x121/0x130 [ib_srp] Call Trace: [<ffffffffa03b20fc>] srp_free_req+0x3c/0x80 [ib_srp] [<ffffffffa03b2188>] srp_finish_req+0x48/0x70 [ib_srp] [<ffffffffa03b21fb>] srp_terminate_io+0x4b/0x60 [ib_srp] [<ffffffffa03a6fb5>] __rport_fail_io_fast+0x75/0x80 [scsi_transport_srp] [<ffffffffa03a7438>] rport_fast_io_fail_timedout+0x88/0xc0 [scsi_transport_srp] [<ffffffff8108b370>] worker_thread+0x170/0x2a0 [<ffffffff81090876>] kthread+0x96/0xa0 [<ffffffff8100c0ca>] child_rip+0xa/0x20 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com> 
The rport timers must be stopped before the SRP initiator destroys the
resources associated with the SCSI host. This is necessary because
otherwise the callback functions invoked from the SRP transport layer
could trigger a use-after-free. Stopping the rport timers before
invoking scsi_remove_host() can trigger long delays in the SCSI error
handler if a transport layer failure occurs while scsi_remove_host()
is in progress. Hence move the code for stopping the rport timers from
srp_rport_release() into a new function and invoke that function after
scsi_remove_host() has finished. This patch fixes the following
sporadic kernel crash:

     kernel BUG at include/asm-generic/dma-mapping-common.h:64!
     invalid opcode: 0000 [#1] SMP
     RIP: 0010:[<ffffffffa03b20b1>]  [<ffffffffa03b20b1>] srp_unmap_data+0x121/0x130 [ib_srp]
     Call Trace:
     [<ffffffffa03b20fc>] srp_free_req+0x3c/0x80 [ib_srp]
     [<ffffffffa03b2188>] srp_finish_req+0x48/0x70 [ib_srp]
     [<ffffffffa03b21fb>] srp_terminate_io+0x4b/0x60 [ib_srp]
     [<ffffffffa03a6fb5>] __rport_fail_io_fast+0x75/0x80 [scsi_transport_srp]
     [<ffffffffa03a7438>] rport_fast_io_fail_timedout+0x88/0xc0 [scsi_transport_srp]
     [<ffffffff8108b370>] worker_thread+0x170/0x2a0
     [<ffffffff81090876>] kthread+0x96/0xa0
     [<ffffffff8100c0ca>] child_rip+0xa/0x20

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
target_core_alua: Referrals infrastructure 2014-01-10T05:48:17+00:00 Hannes Reinecke hare@suse.de 2013-12-17T08:18:49+00:00 c66094bf325ee406b92298d73089ee25484a0263 Add infrastructure for referrals. v2 changes: - Fix unsigned long long division in core_alua_state_lba_dependent on 32-bit (Fengguang + Chen + Hannes) - Fix compile warning in core_alua_state_lba_dependent (nab) - Convert segment_* + sectors variables in core_alua_state_lba_dependent to u64 (Hannes) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 
Add infrastructure for referrals.

v2 changes:

 - Fix unsigned long long division in core_alua_state_lba_dependent on
   32-bit  (Fengguang + Chen + Hannes)
 - Fix compile warning in core_alua_state_lba_dependent (nab)
 - Convert segment_* + sectors variables in core_alua_state_lba_dependent
   to u64 (Hannes)

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
[SCSI] libiscsi: Add local_ipaddr parameter in iscsi_conn struct 2013-12-20T04:56:26+00:00 Adheer Chandravanshi adheer.chandravanshi@qlogic.com 2013-11-22T10:28:21+00:00 ae56ff4084129c7d8a5bf946d48602f551bff2f5 Add local_ipaddr param and support get/set operations on it. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
Add local_ipaddr param and support get/set operations on it.

Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] scsi_transport_iscsi: Export ISCSI_PARAM_LOCAL_IPADDR attr for iscsi_connection 2013-12-20T04:56:26+00:00 Adheer Chandravanshi adheer.chandravanshi@qlogic.com 2013-11-22T10:28:20+00:00 5af62f240b4bf6a79ffe71d570b7b1e2765ea0d0 This attribute specifies the local IP address used to establish connection. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
This attribute specifies the local IP address used to establish connection.

Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] scsi_transport_iscsi: Add host statistics support 2013-12-20T04:56:25+00:00 Lalit Chandivade lalit.chandivade@qlogic.com 2013-11-22T10:28:18+00:00 6fa7c554386d391d1d0f46bc298e57d2eda76e78 Add transport_iscsi hooks to get aggregate host statistics. The statistics include MAC, TCP/IP & iSCSI statistics. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
Add transport_iscsi hooks to get aggregate host statistics.
The statistics include MAC, TCP/IP & iSCSI statistics.

Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>