linux-toradex.git/include/soc/tegra/fuse.h, branch v5.10-rc2

soc/tegra: fuse: Add Tegra234 support

2020-09-18T13:55:29+00:00

Add support for FUSE block found on the Tegra234 SoC, which is largely
similar to the IP found on previous generations.

Reviewed-by: Jon Hunter 
Signed-off-by: Thierry Reding

soc/tegra: fuse: Implement tegra_is_silicon()

2020-09-18T13:55:26+00:00

This function can be used by drivers to determine whether code is
running on silicon or on a simulation platform.

Reviewed-by: Jon Hunter 
Signed-off-by: Thierry Reding

soc/tegra: fuse: Extract tegra_get_platform()

2020-09-18T13:55:22+00:00

This function extracts the PRE_SI_PLATFORM field from the HIDREV
register and can be used to determine which platform the kernel runs on
(silicon, simulation, ...). Note that while only Tegra194 and later
define this field, it should be safe to call this on prior generations
as well since this field should read as 0, indicating silicon.

Reviewed-by: Jon Hunter 
Signed-off-by: Thierry Reding

soc/tegra: fuse: Add Tegra186 and Tegra194 SoC IDs

2020-07-17T13:47:34+00:00

SoC IDs for these generations had never been defined. Do so now.

Signed-off-by: Sandipan Patra 
Reviewed-by: Jon Hunter 
Signed-off-by: Thierry Reding

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201

2019-05-30T18:29:52+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not see http www gnu org
  licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 228 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Steve Winslow 
Reviewed-by: Richard Fontana 
Reviewed-by: Alexios Zavras 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de
Signed-off-by: Greg Kroah-Hartman

soc/tegra: fuse: Remove duplicated function declaration

2018-11-13T19:24:33+00:00

The function tegra_read_chipid() is declared twice in fuse.h. Remove the
redundant declaration.

Signed-off-by: Bo Yan 
Acked-by: Jon Hunter 
Signed-off-by: Thierry Reding

soc/tegra: Register SoC device

2017-08-17T14:43:13+00:00

Move this code from arch/arm/mach-tegra and make it common among 32-bit
and 64-bit Tegra SoCs. This is slightly complicated by the fact that on
32-bit Tegra, the SoC device is used as the parent for all devices that
are instantiated from device tree.

Signed-off-by: Thierry Reding

phy: tegra: Add Tegra210 support

2016-04-29T14:44:48+00:00

Add support for the XUSB pad controller found on Tegra210 SoCs. The
hardware is roughly the same, but some of the registers have been moved
around and the number and type of supported pads has changed.

Signed-off-by: Thierry Reding

soc/tegra: fuse: Rename core_* to soc_*

2015-07-16T08:38:29+00:00

There's a mixture of core_* and soc_* prefixes for variables storing
information related to the VDD_CORE rail. Choose one (soc_*) and use it
more consistently.

Signed-off-by: Thierry Reding

soc/tegra: fuse: Add Tegra210 support

2015-07-16T08:38:29+00:00

Add Tegra210 support to the fuses driver and add Tegra210-specific
speedo definitions.

Signed-off-by: Thierry Reding