Pull ARC updates from Vineet Gupta:

 - Intc imporvements [Yuriy]

 - VDK platform updates [Alexey]

* tag 'arc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat-*] ARC_HAS_COH_CACHES no longer relevant
  ARCv2: intc: Delete useless comments in Device Trees
  ARCv2: IDU-intc: Delete deprecated parameters in Device Trees
  ARCv2: IDU-intc: mask all common interrupts by default
  ARCv2: IDU-intc: Use build registers for getting numbers of interrupts
  ARCv2: intc: Set default priority for all core interrupts
  ARCv2: intc: Use runtime value of irq count for setting up intc
  ARCv2: intc: Rework the build time irq count information
  ARC: [intc-*]: confine NR_CPU_IRQS to intc code
  ARCv2: intc: Use ARC_REG_STATUS32 for addressing STATUS32 reg
  arc: vdk: Add support of UIO
  arc: vdk: Add support of MMC controller
  arc: vdk: Disable halt on reset

Pull power supply and reset updates from Sebastian Reichel:
 "New drivers:
   - sbs-charger driver
   - max14656_charger_detector
   - axp20x_ac_power

  New chip/feature support"
   - axp20x_usb_power: add AXP223 support
   - tps65217: add usb charger support
   - qcom_smbb: support otg regulator
   - at91-reset: add samx7 support

  Dropped drivers:
   - intel_mid_battery (platform was dropped)

  Fixes:
   - at91-poweroff: avoid wearing off LPDDR memory
   - replace deprecated extcon API
   - lots of cleanup and style fixes
   - misc minor functionality fixes"

* tag 'for-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (84 commits)
  power: supply: add AC power supply driver for AXP20X and AXP22X PMICs
  dt-bindings: power: supply: add AXP20X/AXP22X AC power supply
  power: supply: axp20x_usb_power: use IIO channels when available
  power: supply: max14656: Export I2C and OF device ID as module aliases
  power: supply: bq2415x: check for NULL acpi_id to avoid null pointer dereference
  power: supply: bq24190_charger: Adjust formatting
  power: supply: bq24190_charger: Handle fault before status on interrupt
  power: supply: bq24190_charger: Don't read fault register outside irq_handle_thread()
  power: supply: bq24190_charger: Call power_supply_changed() for relevant component
  power: supply: bq24190_charger: Install irq_handler_thread() at end of probe()
  power: supply: bq24190_charger: Call set_mode_host() on pm_resume()
  power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING
  power: supply: qcom_smbb: add regulator dependency
  power: reset: at91-reset: remove leftover platform_device_id
  power: reset: at91-reset: add samx7 support
  power: supply: max14656: fix platform_no_drv_owner.cocci warnings
  power: supply: pcf50633-charger: Compress return logic into one line.
  power: supply: ab8500_btemp: Compress return logic into one line.
  power: reset: at91-poweroff: timely shutdown LPDDR memories
  ARM: at91: define LPDDR types
  ...

This enhancement is needed to allow masking all available common interrupts
in IDU interrupt controller in boot time since the kernel can
discover a number of them from the build register. Also now there
is no need to specify in device tree a list of used core interrupts
by IDU. E.g. before:

    idu_intc: idu-interrupt-controller {
        compatible = "snps,archs-idu-intc";
        interrupt-controller;
        interrupt-parent = <&core_intc>;
        #interrupt-cells = <2>;
        interrupts = <24 25 26 27 28 29 30 31>;
    };

and after:

    idu_intc: idu-interrupt-controller {
        compatible = "snps,archs-idu-intc";
        interrupt-controller;
        interrupt-parent = <&core_intc>;
        #interrupt-cells = <2>;
    };

Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

The Atmel MPDDR controller support LPDDR2 and LPDDR3 memories, add their
types.

Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

Pull powerpc updates from Michael Ellerman:
 "Highlights include:

   - Support for the kexec_file_load() syscall, which is a prereq for
     secure and trusted boot.

   - Prevent kernel execution of userspace on P9 Radix (similar to
     SMEP/PXN).

   - Sort the exception tables at build time, to save time at boot, and
     store them as relative offsets to save space in the kernel image &
     memory.

   - Allow building the kernel with thin archives, which should allow us
     to build an allyesconfig once some other fixes land.

   - Build fixes to allow us to correctly rebuild when changing the
     kernel endian from big to little or vice versa.

   - Plumbing so that we can avoid doing a full mm TLB flush on P9
     Radix.

   - Initial stack protector support (-fstack-protector).

   - Support for dumping the radix (aka. Linux) and hash page tables via
     debugfs.

   - Fix an oops in cxl coredump generation when cxl_get_fd() is used.

   - Freescale updates from Scott: "Highlights include 8xx hugepage
     support, qbman fixes/cleanup, device tree updates, and some misc
     cleanup."

   - Many and varied fixes and minor enhancements as always.

  Thanks to:
    Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman
    Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz,
    Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar
    Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff
    Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin,
    Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N.
    Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica
    Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj
    Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain"

[ And thanks to Michael, who took time off from a new baby to get this
  pull request done.   - Linus ]

* tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits)
  powerpc/fsl/dts: add FMan node for t1042d4rdb
  powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb
  powerpc/fsl/dts: add QMan and BMan nodes on t1024
  powerpc/fsl/dts: add QMan and BMan nodes on t1023
  soc/fsl/qman: test: use DEFINE_SPINLOCK()
  powerpc/fsl-lbc: use DEFINE_SPINLOCK()
  powerpc/8xx: Implement support of hugepages
  powerpc: get hugetlbpage handling more generic
  powerpc: port 64 bits pgtable_cache to 32 bits
  powerpc/boot: Request no dynamic linker for boot wrapper
  soc/fsl/bman: Use resource_size instead of computation
  soc/fsl/qe: use builtin_platform_driver
  powerpc/fsl_pmc: use builtin_platform_driver
  powerpc/83xx/suspend: use builtin_platform_driver
  powerpc/ftrace: Fix the comments for ftrace_modify_code
  powerpc/perf: macros for power9 format encoding
  powerpc/perf: power9 raw event format encoding
  powerpc/perf: update attribute_group data structure
  powerpc/perf: factor out the event format field
  powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, including a couple of newly added
  drivers:

   - A new driver for the power management controller on TI Keystone

   - Support for the prerelease "SCPI" firmware protocol that ended up
     being shipped by Amlogic in their GXBB SoC.

   - A soc_device can now be matched using a glob from inside the
     kernel, when another driver wants to know the specific chip it is
     running on and cannot find out from DT, firmware or hardware.

   - Renesas SoCs now support identification through the soc_device
     interface, both in user space and kernel.

   - Renesas r8a7743 and r8a7745 gain support for their system
     controller

   - A new checking module for the ARM "PSCI" (not to be confused with
     "SCPI" mentioned above) firmware interface.

   - A new driver for the Tegra GMI memory interface

   - Support for the Tegra firmware interfaces with their power
     management controllers

  As usual, the updates for the reset controller framework are merged
  here, as they tend to touch multiple SoCs as well, including a new
  driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp
  interface.

  The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
  Rockchips SoCs see some further updates"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
  misc: sram: remove useless #ifdef
  drivers: psci: Allow PSCI node to be disabled
  drivers: psci: PSCI checker module
  soc: renesas: Identify SoC and register with the SoC bus
  firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails
  firmware: qcom: scm: Remove core, iface and bus clocks dependency
  dt-bindings: firmware: scm: Add MSM8996 DT bindings
  memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name()
  bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name()
  ARM: shmobile: Document DT bindings for Product Register
  soc: renesas: rcar-sysc: add R8A7745 support
  reset: Add Tegra BPMP reset driver
  dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
  dt-bindings: Add power domains to Tegra BPMP firmware
  firmware: tegra: Add BPMP support
  firmware: tegra: Add IVC library
  dt-bindings: firmware: Add bindings for Tegra BPMP
  mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
  mailbox: Add Tegra HSP driver
  firmware: arm_scpi: add support for pre-v1.0 SCPI compatible
  ...

Pull ARC updates from Vineet Gupta:
 "These are mostly timer/clocksource driver updates which were
  Reviewed/Acked by Daniel but had to be merged via ARC tree due to
  dependencies.

  I will follow up with another pull request with actual ARC changes
  early next week !

  Summary:

   - Moving ARC timer driver into drivers/clocksource

   - EZChip timer driver updates [Noam]

   - ARC AXS103 and HAPS platform updates [Alexey]"

* tag 'arc-4.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: axs10x: really enable ARC PGU
  ARC: rename Zebu platform support to HAPS
  clocksource: nps: avoid maybe-uninitialized warning
  clocksource: Add clockevent support to NPS400 driver
  clocksource: update "fn" at CLOCKSOURCE_OF_DECLARE() of nps400 timer
  soc: Support for NPS HW scheduling
  clocksource: import ARC timer driver
  ARC: breakout timer include code into separate header ...
  ARC: move mcip.h into include/soc and adjust the includes
  ARC: breakout aux handling into a separate header
  ARC: time: move time_init() out of the driver
  ARC: timer: gfrc, rtc: build under same option (64-bit timers)
  ARC: timer: gfrc, rtc: Read BCR to detect whether hardware exists ...
  ARC: timer: gfrc, rtc: deuglify big endian code

This new header file is for NPS400 SoC (part of ARC architecture).
The header file includes macros for save/restore of HW scheduling.
The control of HW scheduling is achieved by writing core registers.
This code was moved from arc/plat-eznps so it can be used
from drivers/clocksource/, available only for CONFIG_EZNPS_MTM_EXT.

Signed-off-by: Noam Camus <noamca@mellanox.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

... which allows for use in drivers/clocksource later

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>