With so many counter addresses recently discovered as being wrong, it is
desirable to at least have a central database of information, rather
than two: one through the SYS_COUNT_* registers (used for
ndo_get_stats64), and the other through the offset field of struct
ocelot_stat_layout elements (used for ethtool -S).

The strategy will be to keep the SYS_COUNT_* definitions as the single
source of truth, but for that we need to expand our current definitions
to cover all registers. Then we need to convert the ocelot region
creation logic, and stats worker, to the read semantics imposed by going
through SYS_COUNT_* absolute register addresses, rather than offsets
of 32-bit words relative to SYS_COUNT_RX_OCTETS (which should have been
SYS_CNT, by the way).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The ocelot counters are 32-bit and require periodic reading, every 2
seconds, by ocelot_port_update_stats(), so that wraparounds are
detected.

Currently, the counters reported by ocelot_get_stats64() come from the
32-bit hardware counters directly, rather than from the 64-bit
accumulated ocelot->stats, and this is a problem for their integrity.

The strategy is to make ocelot_get_stats64() able to cherry-pick
individual stats from ocelot->stats the way in which it currently reads
them out from SYS_COUNT_* registers. But currently it can't, because
ocelot->stats is an opaque u64 array that's used only to feed data into
ethtool -S.

To solve that problem, we need to make ocelot->stats indexable, and
associate each element with an element of struct ocelot_stat_layout used
by ethtool -S.

This makes ocelot_stat_layout a fat (and possibly sparse) array, so we
need to change the way in which we access it. We no longer need
OCELOT_STAT_END as a sentinel, because we know the array's size
(OCELOT_NUM_STATS). We just need to skip the array elements that were
left unpopulated for the switch revision (ocelot, felix, seville).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ocelot_get_stats64() currently runs unlocked and therefore may collide
with ocelot_port_update_stats() which indirectly accesses the same
counters. However, ocelot_get_stats64() runs in atomic context, and we
cannot simply take the sleepable ocelot->stats_lock mutex. We need to
convert it to an atomic spinlock first. Do that as a preparatory change.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Reading stats using the SYS_COUNT_* register definitions is only used by
ocelot_get_stats64() from the ocelot switchdev driver, however,
currently the bucket definitions are incorrect.

Separately, on both RX and TX, we have the following problems:
- a 256-1023 bucket which actually tracks the 256-511 packets
- the 1024-1526 bucket actually tracks the 512-1023 packets
- the 1527-max bucket actually tracks the 1024-1526 packets

=> nobody tracks the packets from the real 1527-max bucket

Additionally, the RX_PAUSE, RX_CONTROL, RX_LONGS and RX_CLASSIFIED_DROPS
all track the wrong thing. However this doesn't seem to have any
consequence, since ocelot_get_stats64() doesn't use these.

Even though this problem only manifests itself for the switchdev driver,
we cannot split the fix for ocelot and for DSA, since it requires fixing
the bucket definitions from enum ocelot_reg, which makes us necessarily
adapt the structures from felix and seville as well.

Fixes: 84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953 switch")
Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")
Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull char / misc driver updates from Greg KH:
 "Here is the large set of char and misc and other driver subsystem
  changes for 6.0-rc1.

  Highlights include:

   - large set of IIO driver updates, additions, and cleanups

   - new habanalabs device support added (loads of register maps much
     like GPUs have)

   - soundwire driver updates

   - phy driver updates

   - slimbus driver updates

   - tiny virt driver fixes and updates

   - misc driver fixes and updates

   - interconnect driver updates

   - hwtracing driver updates

   - fpga driver updates

   - extcon driver updates

   - firmware driver updates

   - counter driver update

   - mhi driver fixes and updates

   - binder driver fixes and updates

   - speakup driver fixes

  All of these have been in linux-next for a while without any reported
  problems"

* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
  drivers: lkdtm: fix clang -Wformat warning
  char: remove VR41XX related char driver
  misc: Mark MICROCODE_MINOR unused
  spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
  dt-bindings: iio: adc: Add compatible for MT8188
  iio: light: isl29028: Fix the warning in isl29028_remove()
  iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
  iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
  iio: adc: max1027: unlock on error path in max1027_read_single_value()
  iio: proximity: sx9324: add empty line in front of bullet list
  iio: magnetometer: hmc5843: Remove duplicate 'the'
  iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  ...

In a future change we will need to remember the entire tc-taprio config
on all ports rather than just the base time, so use the
taprio_offload_get() helper function to replace ocelot_port->base_time
with ocelot_port->taprio.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When adjusting the PTP clock, the base time of the TAS configuration
will become unreliable. We need reset the TAS configuration by using a
new base time.

For example, if the driver gets a base time 0 of Qbv configuration from
user, and current time is 20000. The driver will set the TAS base time
to be 20000. After the PTP clock adjustment, the current time becomes
10000. If the TAS base time is still 20000, it will be a future time,
and TAS entry list will stop running. Another example, if the current
time becomes to be 10000000 after PTP clock adjust, a large time offset
can cause the hardware to hang.

This patch introduces a tas_clock_adjust() function to reset the TAS
module by using a new base time after the PTP clock adjustment. This can
avoid issues above.

Due to PTP clock adjustment can occur at any time, it may conflict with
the TAS configuration. We introduce a new TAS lock to serialize the
access to the TAS registers.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PMI8998 and PM660 expose the fab_id, this is needed by drivers like
the RRADC to calibrate ADC values.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220429220904.137297-4-caleb.connolly@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Some PMIC functions such as the RRADC need to be aware of the PMIC
chip revision information to implement errata or otherwise adjust
behaviour, export the PMIC information to enable this.

This is specifically required to enable the RRADC to adjust
coefficients based on which chip fab the PMIC was produced in,
this can vary per unique device and therefore has to be read at
runtime.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220429220904.137297-3-caleb.connolly@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Pull ARM driver updates from Arnd Bergmann:
 "There are minor updates to SoC specific drivers for chips by Rockchip,
  Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.

  Noteworthy driver changes include:

   - Several conversions of DT bindings to yaml format.

   - Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.

   - Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
     and support for more chips in the RPMh power domains and the
     soc-id.

   - NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.

   - Apple M1 gains support for the on-chip NVMe controller, making it
     possible to finally use the internal disks. This also includes SoC
     drivers for their RTKit IPC and for the SART DMA address filter.

  For other subsystems that merge their drivers through the SoC tree, we
  have

   - Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
     SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
     now has a cache for firmware argument structures as an
     optimization, and SCMI now supports the 3.1 version of the
     specification.

   - Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
     drivers

   - Memory controller updates for Tegra, and a few updates for other
     platforms"

* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
  memory: tegra: Add MC error logging on Tegra186 onward
  memory: tegra: Add memory controller channels support
  memory: tegra: Add APE memory clients for Tegra234
  memory: tegra: Add Tegra234 support
  nvme-apple: fix sparse endianess warnings
  soc/tegra: pmc: Document core domain fields
  soc: qcom: pdr: use static for servreg_* variables
  soc: imx: fix semicolon.cocci warnings
  soc: renesas: R-Car V3U is R-Car Gen4
  soc: imx: add i.MX8MP HDMI blk-ctrl
  soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
  soc: imx: add i.MX8MP HSIO blk-ctrl
  soc: imx: imx8m-blk-ctrl: set power device name
  soc: qcom: llcc: Add sc8180x and sc8280xp configurations
  dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
  soc/tegra: pmc: Select REGMAP
  dt-bindings: reset: st,sti-powerdown: Convert to yaml
  dt-bindings: reset: st,sti-picophyreset: Convert to yaml
  dt-bindings: reset: socfpga: Convert to yaml
  dt-bindings: reset: snps,axs10x-reset: Convert to yaml
  ...