linux-toradex.git/include/uapi/asm-generic, branch v6.4-rc1 Linux kernel for Apalis and Colibri modules open: return EINVAL for O_DIRECTORY | O_CREAT 2023-03-22T10:06:55+00:00 Christian Brauner brauner@kernel.org 2023-03-21T08:18:07+00:00 43b450632676fb60e9faeddff285d9fac94a4f58 After a couple of years and multiple LTS releases we received a report that the behavior of O_DIRECTORY | O_CREAT changed starting with v5.7. On kernels prior to v5.7 combinations of O_DIRECTORY, O_CREAT, O_EXCL had the following semantics: (1) open("/tmp/d", O_DIRECTORY | O_CREAT) * d doesn't exist: create regular file * d exists and is a regular file: ENOTDIR * d exists and is a directory: EISDIR (2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL) * d doesn't exist: create regular file * d exists and is a regular file: EEXIST * d exists and is a directory: EEXIST (3) open("/tmp/d", O_DIRECTORY | O_EXCL) * d doesn't exist: ENOENT * d exists and is a regular file: ENOTDIR * d exists and is a directory: open directory On kernels since to v5.7 combinations of O_DIRECTORY, O_CREAT, O_EXCL have the following semantics: (1) open("/tmp/d", O_DIRECTORY | O_CREAT) * d doesn't exist: ENOTDIR (create regular file) * d exists and is a regular file: ENOTDIR * d exists and is a directory: EISDIR (2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL) * d doesn't exist: ENOTDIR (create regular file) * d exists and is a regular file: EEXIST * d exists and is a directory: EEXIST (3) open("/tmp/d", O_DIRECTORY | O_EXCL) * d doesn't exist: ENOENT * d exists and is a regular file: ENOTDIR * d exists and is a directory: open directory This is a fairly substantial semantic change that userspace didn't notice until Pedro took the time to deliberately figure out corner cases. Since no one noticed this breakage we can somewhat safely assume that O_DIRECTORY | O_CREAT combinations are likely unused. The v5.7 breakage is especially weird because while ENOTDIR is returned indicating failure a regular file is actually created. This doesn't make a lot of sense. Time was spent finding potential users of this combination. Searching on codesearch.debian.net showed that codebases often express semantical expectations about O_DIRECTORY | O_CREAT which are completely contrary to what our code has done and currently does. The expectation often is that this particular combination would create and open a directory. This suggests users who tried to use that combination would stumble upon the counterintuitive behavior no matter if pre-v5.7 or post v5.7 and quickly realize neither semantics give them what they want. For some examples see the code examples in [1] to [3] and the discussion in [4]. There are various ways to address this issue. The lazy/simple option would be to restore the pre-v5.7 behavior and to just live with that bug forever. But since there's a real chance that the O_DIRECTORY | O_CREAT quirk isn't relied upon we should try to get away with murder(ing bad semantics) first. If we need to Frankenstein pre-v5.7 behavior later so be it. So let's simply return EINVAL categorically for O_DIRECTORY | O_CREAT combinations. In addition to cleaning up the old bug this also opens up the possiblity to make that flag combination do something more intuitive in the future. Starting with this commit the following semantics apply: (1) open("/tmp/d", O_DIRECTORY | O_CREAT) * d doesn't exist: EINVAL * d exists and is a regular file: EINVAL * d exists and is a directory: EINVAL (2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL) * d doesn't exist: EINVAL * d exists and is a regular file: EINVAL * d exists and is a directory: EINVAL (3) open("/tmp/d", O_DIRECTORY | O_EXCL) * d doesn't exist: ENOENT * d exists and is a regular file: ENOTDIR * d exists and is a directory: open directory One additional note, O_TMPFILE is implemented as: #define __O_TMPFILE 020000000 #define O_TMPFILE (__O_TMPFILE | O_DIRECTORY) #define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT) For older kernels it was important to return an explicit error when O_TMPFILE wasn't supported. So O_TMPFILE requires that O_DIRECTORY is raised alongside __O_TMPFILE. It also enforced that O_CREAT wasn't specified. Since O_DIRECTORY | O_CREAT could be used to create a regular allowing that combination together with __O_TMPFILE would've meant that false positives were possible, i.e., that a regular file was created instead of a O_TMPFILE. This could've been used to trick userspace into thinking it operated on a O_TMPFILE when it wasn't. Now that we block O_DIRECTORY | O_CREAT completely the check for O_CREAT in the __O_TMPFILE branch via if ((flags & O_TMPFILE_MASK) != O_TMPFILE) can be dropped. Instead we can simply check verify that O_DIRECTORY is raised via if (!(flags & O_DIRECTORY)) and explain this in two comments. As Aleksa pointed out O_PATH is unaffected by this change since it always returned EINVAL if O_CREAT was specified - with or without O_DIRECTORY. Link: https://lore.kernel.org/lkml/20230320071442.172228-1-pedro.falcato@gmail.com Link: https://sources.debian.org/src/flatpak/1.14.4-1/subprojects/libglnx/glnx-dirfd.c/?hl=324#L324 [1] Link: https://sources.debian.org/src/flatpak-builder/1.2.3-1/subprojects/libglnx/glnx-shutil.c/?hl=251#L251 [2] Link: https://sources.debian.org/src/ostree/2022.7-2/libglnx/glnx-dirfd.c/?hl=324#L324 [3] Link: https://www.openwall.com/lists/oss-security/2014/11/26/14 [4] Reported-by: Pedro Falcato <pedro.falcato@gmail.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christian Brauner <brauner@kernel.org> 
After a couple of years and multiple LTS releases we received a report
that the behavior of O_DIRECTORY | O_CREAT changed starting with v5.7.

On kernels prior to v5.7 combinations of O_DIRECTORY, O_CREAT, O_EXCL
had the following semantics:

(1) open("/tmp/d", O_DIRECTORY | O_CREAT)
    * d doesn't exist:                create regular file
    * d exists and is a regular file: ENOTDIR
    * d exists and is a directory:    EISDIR

(2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL)
    * d doesn't exist:                create regular file
    * d exists and is a regular file: EEXIST
    * d exists and is a directory:    EEXIST

(3) open("/tmp/d", O_DIRECTORY | O_EXCL)
    * d doesn't exist:                ENOENT
    * d exists and is a regular file: ENOTDIR
    * d exists and is a directory:    open directory

On kernels since to v5.7 combinations of O_DIRECTORY, O_CREAT, O_EXCL
have the following semantics:

(1) open("/tmp/d", O_DIRECTORY | O_CREAT)
    * d doesn't exist:                ENOTDIR (create regular file)
    * d exists and is a regular file: ENOTDIR
    * d exists and is a directory:    EISDIR

(2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL)
    * d doesn't exist:                ENOTDIR (create regular file)
    * d exists and is a regular file: EEXIST
    * d exists and is a directory:    EEXIST

(3) open("/tmp/d", O_DIRECTORY | O_EXCL)
    * d doesn't exist:                ENOENT
    * d exists and is a regular file: ENOTDIR
    * d exists and is a directory:    open directory

This is a fairly substantial semantic change that userspace didn't
notice until Pedro took the time to deliberately figure out corner
cases. Since no one noticed this breakage we can somewhat safely assume
that O_DIRECTORY | O_CREAT combinations are likely unused.

The v5.7 breakage is especially weird because while ENOTDIR is returned
indicating failure a regular file is actually created. This doesn't make
a lot of sense.

Time was spent finding potential users of this combination. Searching on
codesearch.debian.net showed that codebases often express semantical
expectations about O_DIRECTORY | O_CREAT which are completely contrary
to what our code has done and currently does.

The expectation often is that this particular combination would create
and open a directory. This suggests users who tried to use that
combination would stumble upon the counterintuitive behavior no matter
if pre-v5.7 or post v5.7 and quickly realize neither semantics give them
what they want. For some examples see the code examples in [1] to [3]
and the discussion in [4].

There are various ways to address this issue. The lazy/simple option
would be to restore the pre-v5.7 behavior and to just live with that bug
forever. But since there's a real chance that the O_DIRECTORY | O_CREAT
quirk isn't relied upon we should try to get away with murder(ing bad
semantics) first. If we need to Frankenstein pre-v5.7 behavior later so
be it.

So let's simply return EINVAL categorically for O_DIRECTORY | O_CREAT
combinations. In addition to cleaning up the old bug this also opens up
the possiblity to make that flag combination do something more intuitive
in the future.

Starting with this commit the following semantics apply:

(1) open("/tmp/d", O_DIRECTORY | O_CREAT)
    * d doesn't exist:                EINVAL
    * d exists and is a regular file: EINVAL
    * d exists and is a directory:    EINVAL

(2) open("/tmp/d", O_DIRECTORY | O_CREAT | O_EXCL)
    * d doesn't exist:                EINVAL
    * d exists and is a regular file: EINVAL
    * d exists and is a directory:    EINVAL

(3) open("/tmp/d", O_DIRECTORY | O_EXCL)
    * d doesn't exist:                ENOENT
    * d exists and is a regular file: ENOTDIR
    * d exists and is a directory:    open directory

One additional note, O_TMPFILE is implemented as:

    #define __O_TMPFILE    020000000
    #define O_TMPFILE      (__O_TMPFILE | O_DIRECTORY)
    #define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT)

For older kernels it was important to return an explicit error when
O_TMPFILE wasn't supported. So O_TMPFILE requires that O_DIRECTORY is
raised alongside __O_TMPFILE. It also enforced that O_CREAT wasn't
specified. Since O_DIRECTORY | O_CREAT could be used to create a regular
allowing that combination together with __O_TMPFILE would've meant that
false positives were possible, i.e., that a regular file was created
instead of a O_TMPFILE. This could've been used to trick userspace into
thinking it operated on a O_TMPFILE when it wasn't.

Now that we block O_DIRECTORY | O_CREAT completely the check for O_CREAT
in the __O_TMPFILE branch via if ((flags & O_TMPFILE_MASK) != O_TMPFILE)
can be dropped. Instead we can simply check verify that O_DIRECTORY is
raised via if (!(flags & O_DIRECTORY)) and explain this in two comments.

As Aleksa pointed out O_PATH is unaffected by this change since it
always returned EINVAL if O_CREAT was specified - with or without
O_DIRECTORY.

Link: https://lore.kernel.org/lkml/20230320071442.172228-1-pedro.falcato@gmail.com
Link: https://sources.debian.org/src/flatpak/1.14.4-1/subprojects/libglnx/glnx-dirfd.c/?hl=324#L324 [1]
Link: https://sources.debian.org/src/flatpak-builder/1.2.3-1/subprojects/libglnx/glnx-shutil.c/?hl=251#L251 [2]
Link: https://sources.debian.org/src/ostree/2022.7-2/libglnx/glnx-dirfd.c/?hl=324#L324 [3]
Link: https://www.openwall.com/lists/oss-security/2014/11/26/14 [4]
Reported-by: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
uapi: Add missing _UAPI prefix to <asm-generic/types.h> include guard 2022-12-01T15:22:06+00:00 Geert Uytterhoeven geert@linux-m68k.org 2022-11-23T16:39:18+00:00 32975c491ee410598b33201344c123fcc81a7c33 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
hugetlb_encode.h: fix undefined behaviour (34 << 26) 2022-10-03T21:02:55+00:00 Matthias Goergens matthias.goergens@gmail.com 2022-09-05T03:19:04+00:00 710bb68c2e3a24512e2d2bae470960d7488e97b1 Left-shifting past the size of your datatype is undefined behaviour in C. The literal 34 gets the type `int`, and that one is not big enough to be left shifted by 26 bits. An `unsigned` is long enough (on any machine that has at least 32 bits for their ints.) For uniformity, we mark all the literals as unsigned. But it's only really needed for HUGETLB_FLAG_ENCODE_16GB. Thanks to Randy Dunlap for an initial review and suggestion. Link: https://lkml.kernel.org/r/20220905031904.150925-1-matthias.goergens@gmail.com Signed-off-by: Matthias Goergens <matthias.goergens@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 
Left-shifting past the size of your datatype is undefined behaviour in C. 
The literal 34 gets the type `int`, and that one is not big enough to be
left shifted by 26 bits.

An `unsigned` is long enough (on any machine that has at least 32 bits for
their ints.)

For uniformity, we mark all the literals as unsigned.  But it's only
really needed for HUGETLB_FLAG_ENCODE_16GB.

Thanks to Randy Dunlap for an initial review and suggestion.

Link: https://lkml.kernel.org/r/20220905031904.150925-1-matthias.goergens@gmail.com
Signed-off-by: Matthias Goergens <matthias.goergens@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/madvise: introduce MADV_COLLAPSE sync hugepage collapse 2022-09-12T03:25:46+00:00 Zach O'Keefe zokeefe@google.com 2022-07-06T23:59:27+00:00 7d8faaf155454f8798ec56404faca29a82689c77 This idea was introduced by David Rientjes[1]. Introduce a new madvise mode, MADV_COLLAPSE, that allows users to request a synchronous collapse of memory at their own expense. The benefits of this approach are: * CPU is charged to the process that wants to spend the cycles for the THP * Avoid unpredictable timing of khugepaged collapse Semantics This call is independent of the system-wide THP sysfs settings, but will fail for memory marked VM_NOHUGEPAGE. If the ranges provided span multiple VMAs, the semantics of the collapse over each VMA is independent from the others. This implies a hugepage cannot cross a VMA boundary. If collapse of a given hugepage-aligned/sized region fails, the operation may continue to attempt collapsing the remainder of memory specified. The memory ranges provided must be page-aligned, but are not required to be hugepage-aligned. If the memory ranges are not hugepage-aligned, the start/end of the range will be clamped to the first/last hugepage-aligned address covered by said range. The memory ranges must span at least one hugepage-sized region. All non-resident pages covered by the range will first be swapped/faulted-in, before being internally copied onto a freshly allocated hugepage. Unmapped pages will have their data directly initialized to 0 in the new hugepage. However, for every eligible hugepage aligned/sized region to-be collapsed, at least one page must currently be backed by memory (a PMD covering the address range must already exist). Allocation for the new hugepage may enter direct reclaim and/or compaction, regardless of VMA flags. When the system has multiple NUMA nodes, the hugepage will be allocated from the node providing the most native pages. This operation operates on the current state of the specified process and makes no persistent changes or guarantees on how pages will be mapped, constructed, or faulted in the future Return Value If all hugepage-sized/aligned regions covered by the provided range were either successfully collapsed, or were already PMD-mapped THPs, this operation will be deemed successful. On success, process_madvise(2) returns the number of bytes advised, and madvise(2) returns 0. Else, -1 is returned and errno is set to indicate the error for the most-recently attempted hugepage collapse. Note that many failures might have occurred, since the operation may continue to collapse in the event a single hugepage-sized/aligned region fails. ENOMEM Memory allocation failed or VMA not found EBUSY Memcg charging failed EAGAIN Required resource temporarily unavailable. Try again might succeed. EINVAL Other error: No PMD found, subpage doesn't have Present bit set, "Special" page no backed by struct page, VMA incorrectly sized, address not page-aligned, ... Most notable here is ENOMEM and EBUSY (new to madvise) which are intended to provide the caller with actionable feedback so they may take an appropriate fallback measure. Use Cases An immediate user of this new functionality are malloc() implementations that manage memory in hugepage-sized chunks, but sometimes subrelease memory back to the system in native-sized chunks via MADV_DONTNEED; zapping the pmd. Later, when the memory is hot, the implementation could madvise(MADV_COLLAPSE) to re-back the memory by THPs to regain hugepage coverage and dTLB performance. TCMalloc is such an implementation that could benefit from this[2]. Only privately-mapped anon memory is supported for now, but additional support for file, shmem, and HugeTLB high-granularity mappings[2] is expected. File and tmpfs/shmem support would permit: * Backing executable text by THPs. Current support provided by CONFIG_READ_ONLY_THP_FOR_FS may take a long time on a large system which might impair services from serving at their full rated load after (re)starting. Tricks like mremap(2)'ing text onto anonymous memory to immediately realize iTLB performance prevents page sharing and demand paging, both of which increase steady state memory footprint. With MADV_COLLAPSE, we get the best of both worlds: Peak upfront performance and lower RAM footprints. * Backing guest memory by hugapages after the memory contents have been migrated in native-page-sized chunks to a new host, in a userfaultfd-based live-migration stack. [1] https://lore.kernel.org/linux-mm/d098c392-273a-36a4-1a29-59731cdf5d3d@google.com/ [2] https://github.com/google/tcmalloc/tree/master/tcmalloc [jrdr.linux@gmail.com: avoid possible memory leak in failure path] Link: https://lkml.kernel.org/r/20220713024109.62810-1-jrdr.linux@gmail.com [zokeefe@google.com add missing kfree() to madvise_collapse()] Link: https://lore.kernel.org/linux-mm/20220713024109.62810-1-jrdr.linux@gmail.com/ Link: https://lkml.kernel.org/r/20220713161851.1879439-1-zokeefe@google.com [zokeefe@google.com: delay computation of hpage boundaries until use]] Link: https://lkml.kernel.org/r/20220720140603.1958773-4-zokeefe@google.com Link: https://lkml.kernel.org/r/20220706235936.2197195-10-zokeefe@google.com Signed-off-by: Zach O'Keefe <zokeefe@google.com> Signed-off-by: "Souptick Joarder (HPE)" <jrdr.linux@gmail.com> Suggested-by: David Rientjes <rientjes@google.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Chris Kennelly <ckennelly@google.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Hildenbrand <david@redhat.com> Cc: Helge Deller <deller@gmx.de> Cc: Hugh Dickins <hughd@google.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rongwei Wang <rongwei.wang@linux.alibaba.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 
This idea was introduced by David Rientjes[1].

Introduce a new madvise mode, MADV_COLLAPSE, that allows users to request
a synchronous collapse of memory at their own expense.

The benefits of this approach are:

* CPU is charged to the process that wants to spend the cycles for the
  THP
* Avoid unpredictable timing of khugepaged collapse

Semantics

This call is independent of the system-wide THP sysfs settings, but will
fail for memory marked VM_NOHUGEPAGE.  If the ranges provided span
multiple VMAs, the semantics of the collapse over each VMA is independent
from the others.  This implies a hugepage cannot cross a VMA boundary.  If
collapse of a given hugepage-aligned/sized region fails, the operation may
continue to attempt collapsing the remainder of memory specified.

The memory ranges provided must be page-aligned, but are not required to
be hugepage-aligned.  If the memory ranges are not hugepage-aligned, the
start/end of the range will be clamped to the first/last hugepage-aligned
address covered by said range.  The memory ranges must span at least one
hugepage-sized region.

All non-resident pages covered by the range will first be
swapped/faulted-in, before being internally copied onto a freshly
allocated hugepage.  Unmapped pages will have their data directly
initialized to 0 in the new hugepage.  However, for every eligible
hugepage aligned/sized region to-be collapsed, at least one page must
currently be backed by memory (a PMD covering the address range must
already exist).

Allocation for the new hugepage may enter direct reclaim and/or
compaction, regardless of VMA flags.  When the system has multiple NUMA
nodes, the hugepage will be allocated from the node providing the most
native pages.  This operation operates on the current state of the
specified process and makes no persistent changes or guarantees on how
pages will be mapped, constructed, or faulted in the future

Return Value

If all hugepage-sized/aligned regions covered by the provided range were
either successfully collapsed, or were already PMD-mapped THPs, this
operation will be deemed successful.  On success, process_madvise(2)
returns the number of bytes advised, and madvise(2) returns 0.  Else, -1
is returned and errno is set to indicate the error for the most-recently
attempted hugepage collapse.  Note that many failures might have occurred,
since the operation may continue to collapse in the event a single
hugepage-sized/aligned region fails.

	ENOMEM	Memory allocation failed or VMA not found
	EBUSY	Memcg charging failed
	EAGAIN	Required resource temporarily unavailable.  Try again
		might succeed.
	EINVAL	Other error: No PMD found, subpage doesn't have Present
		bit set, "Special" page no backed by struct page, VMA
		incorrectly sized, address not page-aligned, ...

Most notable here is ENOMEM and EBUSY (new to madvise) which are intended
to provide the caller with actionable feedback so they may take an
appropriate fallback measure.

Use Cases

An immediate user of this new functionality are malloc() implementations
that manage memory in hugepage-sized chunks, but sometimes subrelease
memory back to the system in native-sized chunks via MADV_DONTNEED;
zapping the pmd.  Later, when the memory is hot, the implementation could
madvise(MADV_COLLAPSE) to re-back the memory by THPs to regain hugepage
coverage and dTLB performance.  TCMalloc is such an implementation that
could benefit from this[2].

Only privately-mapped anon memory is supported for now, but additional
support for file, shmem, and HugeTLB high-granularity mappings[2] is
expected.  File and tmpfs/shmem support would permit:

* Backing executable text by THPs.  Current support provided by
  CONFIG_READ_ONLY_THP_FOR_FS may take a long time on a large system which
  might impair services from serving at their full rated load after
  (re)starting.  Tricks like mremap(2)'ing text onto anonymous memory to
  immediately realize iTLB performance prevents page sharing and demand
  paging, both of which increase steady state memory footprint.  With
  MADV_COLLAPSE, we get the best of both worlds: Peak upfront performance
  and lower RAM footprints.
* Backing guest memory by hugapages after the memory contents have been
  migrated in native-page-sized chunks to a new host, in a
  userfaultfd-based live-migration stack.

[1] https://lore.kernel.org/linux-mm/d098c392-273a-36a4-1a29-59731cdf5d3d@google.com/
[2] https://github.com/google/tcmalloc/tree/master/tcmalloc

[jrdr.linux@gmail.com: avoid possible memory leak in failure path]
  Link: https://lkml.kernel.org/r/20220713024109.62810-1-jrdr.linux@gmail.com
[zokeefe@google.com add missing kfree() to madvise_collapse()]
  Link: https://lore.kernel.org/linux-mm/20220713024109.62810-1-jrdr.linux@gmail.com/
  Link: https://lkml.kernel.org/r/20220713161851.1879439-1-zokeefe@google.com
[zokeefe@google.com: delay computation of hpage boundaries until use]]
  Link: https://lkml.kernel.org/r/20220720140603.1958773-4-zokeefe@google.com
Link: https://lkml.kernel.org/r/20220706235936.2197195-10-zokeefe@google.com
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: "Souptick Joarder (HPE)" <jrdr.linux@gmail.com>
Suggested-by: David Rientjes <rientjes@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Chris Kennelly <ckennelly@google.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rongwei Wang <rongwei.wang@linux.alibaba.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Merge tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2022-08-08T18:31:40+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-08-08T18:31:40+00:00 607ca0f742b7d990b6efb3c3e7a52830f7e96419 Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.0-rc1. It was delayed from last week as I wanted to make sure the last commit here got some good testing in linux-next and elsewhere as it seemed to show up only late in testing for some reason. Nothing major here, just lots of cleanups from Jiri and Ilpo to make the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo). Also included in here is the obligatory n_gsm updates from Daniel Starke and lots of tiny driver updates and minor fixes and tweaks for other smaller serial drivers. All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits) tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements tty: amiserial: Fix comment typo tty: serial: document uart_get_console() tty: serial: serial_core, reformat kernel-doc for functions Documentation: serial: link uart_ops properly Documentation: serial: move GPIO kernel-doc to the functions Documentation: serial: dedup kernel-doc for uart functions Documentation: serial: move uart_ops documentation to the struct dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126 serial: mvebu-uart: uart2 error bits clearing tty: serial: fsl_lpuart: correct the count of break characters serial: stm32: make info structs static to avoid sparse warnings serial: fsl_lpuart: zero out parity bit in CS7 mode tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate. serial: 8250_bcm2835aux: Add missing clk_disable_unprepare() tty: vt: initialize unicode screen buffer serial: remove VR41XX serial driver serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags serial: 8250_dwlib: remove redundant sanity check for RS485 flags dt_bindings: rs485: Correct delay values ... 
Pull tty / serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.0-rc1.

  It was delayed from last week as I wanted to make sure the last commit
  here got some good testing in linux-next and elsewhere as it seemed to
  show up only late in testing for some reason.

  Nothing major here, just lots of cleanups from Jiri and Ilpo to make
  the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo).

  Also included in here is the obligatory n_gsm updates from Daniel
  Starke and lots of tiny driver updates and minor fixes and tweaks for
  other smaller serial drivers.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
  tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
  tty: amiserial: Fix comment typo
  tty: serial: document uart_get_console()
  tty: serial: serial_core, reformat kernel-doc for functions
  Documentation: serial: link uart_ops properly
  Documentation: serial: move GPIO kernel-doc to the functions
  Documentation: serial: dedup kernel-doc for uart functions
  Documentation: serial: move uart_ops documentation to the struct
  dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
  serial: mvebu-uart: uart2 error bits clearing
  tty: serial: fsl_lpuart: correct the count of break characters
  serial: stm32: make info structs static to avoid sparse warnings
  serial: fsl_lpuart: zero out parity bit in CS7 mode
  tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
  tty: vt: initialize unicode screen buffer
  serial: remove VR41XX serial driver
  serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
  serial: 8250_dwlib: remove redundant sanity check for RS485 flags
  dt_bindings: rs485: Correct delay values
  ...
tools: Fixed MIPS builds due to struct flock re-definition 2022-07-20T10:55:33+00:00 Florian Fainelli f.fainelli@gmail.com 2022-07-15T18:55:49+00:00 9b31e60800d8fa69027baf9ec7f03a0c5b145079 Building perf for MIPS failed after 9f79b8b72339 ("uapi: simplify __ARCH_FLOCK{,64}_PAD a little") with the following error: CC /home/fainelli/work/buildroot/output/bmips/build/linux-custom/tools/perf/trace/beauty/fcntl.o In file included from ../../../../host/mipsel-buildroot-linux-gnu/sysroot/usr/include/asm/fcntl.h:77, from ../include/uapi/linux/fcntl.h:5, from trace/beauty/fcntl.c:10: ../include/uapi/asm-generic/fcntl.h:188:8: error: redefinition of 'struct flock' struct flock { ^~~~~ In file included from ../include/uapi/linux/fcntl.h:5, from trace/beauty/fcntl.c:10: ../../../../host/mipsel-buildroot-linux-gnu/sysroot/usr/include/asm/fcntl.h:63:8: note: originally defined here struct flock { ^~~~~ This is due to the local copy under tools/include/uapi/asm-generic/fcntl.h including the toolchain's kernel headers which already define 'struct flock' and define HAVE_ARCH_STRUCT_FLOCK to future inclusions make a decision as to whether re-defining 'struct flock' is appropriate or not. Make sure what do not re-define 'struct flock' when HAVE_ARCH_STRUCT_FLOCK is already defined. Fixes: 9f79b8b72339 ("uapi: simplify __ARCH_FLOCK{,64}_PAD a little") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> [arnd: sync with include/uapi/asm-generic/fcntl.h as well] Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Building perf for MIPS failed after 9f79b8b72339 ("uapi: simplify
__ARCH_FLOCK{,64}_PAD a little") with the following error:

  CC
/home/fainelli/work/buildroot/output/bmips/build/linux-custom/tools/perf/trace/beauty/fcntl.o
In file included from
../../../../host/mipsel-buildroot-linux-gnu/sysroot/usr/include/asm/fcntl.h:77,
                 from ../include/uapi/linux/fcntl.h:5,
                 from trace/beauty/fcntl.c:10:
../include/uapi/asm-generic/fcntl.h:188:8: error: redefinition of
'struct flock'
 struct flock {
        ^~~~~
In file included from ../include/uapi/linux/fcntl.h:5,
                 from trace/beauty/fcntl.c:10:
../../../../host/mipsel-buildroot-linux-gnu/sysroot/usr/include/asm/fcntl.h:63:8:
note: originally defined here
 struct flock {
        ^~~~~

This is due to the local copy under
tools/include/uapi/asm-generic/fcntl.h including the toolchain's kernel
headers which already define 'struct flock' and define
HAVE_ARCH_STRUCT_FLOCK to future inclusions make a decision as to
whether re-defining 'struct flock' is appropriate or not.

Make sure what do not re-define 'struct flock'
when HAVE_ARCH_STRUCT_FLOCK is already defined.

Fixes: 9f79b8b72339 ("uapi: simplify __ARCH_FLOCK{,64}_PAD a little")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[arnd: sync with include/uapi/asm-generic/fcntl.h as well]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
serial: Support for RS-485 multipoint addresses 2022-06-27T12:44:20+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2022-06-24T20:42:09+00:00 4f768e94774c58c9f7f54ebd38dadf172970046a Add support for RS-485 multipoint addressing using 9th bit [*]. The addressing mode is configured through ->rs485_config(). ADDRB in termios indicates 9th bit addressing mode is enabled. In this mode, 9th bit is used to indicate an address (byte) within the communication line. ADDRB can only be enabled/disabled through ->rs485_config() that is also responsible for setting the destination and receiver (filter) addresses. Add traps to detect unwanted changes to struct serial_rs485 layout using static_assert(). [*] Technically, RS485 is just an electronic spec and does not itself specify the 9th bit addressing mode but 9th bit seems at least "semi-standard" way to do addressing with RS485. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624204210.11112-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add support for RS-485 multipoint addressing using 9th bit [*]. The
addressing mode is configured through ->rs485_config().

ADDRB in termios indicates 9th bit addressing mode is enabled. In this
mode, 9th bit is used to indicate an address (byte) within the
communication line. ADDRB can only be enabled/disabled through
->rs485_config() that is also responsible for setting the destination and
receiver (filter) addresses.

Add traps to detect unwanted changes to struct serial_rs485 layout using
static_assert().

[*] Technically, RS485 is just an electronic spec and does not itself
specify the 9th bit addressing mode but 9th bit seems at least
"semi-standard" way to do addressing with RS485.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220624204210.11112-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2022-06-03T18:08:40+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-06-03T18:08:40+00:00 932c2989b59008e530ffcc7c7e6ef507a28b28ca Pull tty and serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.19-rc1. Lots of tiny cleanups in here, the major stuff is: - termbit cleanups and unification by Ilpo. A much needed change that goes a long way to making things simpler for all of the different arches - tty documentation cleanups and movements to their own place in the documentation tree - old tty driver cleanups and fixes from Jiri to bring some existing drivers into the modern world - RS485 cleanups and unifications to make it easier for individual drivers to support this mode instead of having to duplicate logic in each driver - Lots of 8250 driver updates and additions - new device id additions - n_gsm continued fixes and cleanups - other minor serial driver updates and cleanups All of these have been in linux-next for weeks with no reported issues" * tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits) tty: Rework receive flow control char logic pcmcia: synclink_cs: Don't allow CS5-6 serial: stm32-usart: Correct CSIZE, bits, and parity serial: st-asc: Sanitize CSIZE and correct PARENB for CS7 serial: sifive: Sanitize CSIZE and c_iflag serial: sh-sci: Don't allow CS5-6 serial: txx9: Don't allow CS5-6 serial: rda-uart: Don't allow CS5-6 serial: digicolor-usart: Don't allow CS5-6 serial: uartlite: Fix BRKINT clearing serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE serial: core: Do stop_rx in suspend path for console if console_suspend is disabled tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate. dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485 Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL" serial: msm_serial: disable interrupts in __msm_console_write() serial: meson: acquire port->lock in startup() serial: 8250_dw: Use dev_err_probe() serial: 8250_dw: Use devm_add_action_or_reset() ... 
Pull tty and serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver updates for 5.19-rc1.

  Lots of tiny cleanups in here, the major stuff is:

   - termbit cleanups and unification by Ilpo. A much needed change that
     goes a long way to making things simpler for all of the different
     arches

   - tty documentation cleanups and movements to their own place in the
     documentation tree

   - old tty driver cleanups and fixes from Jiri to bring some existing
     drivers into the modern world

   - RS485 cleanups and unifications to make it easier for individual
     drivers to support this mode instead of having to duplicate logic
     in each driver

   - Lots of 8250 driver updates and additions

   - new device id additions

   - n_gsm continued fixes and cleanups

   - other minor serial driver updates and cleanups

  All of these have been in linux-next for weeks with no reported issues"

* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
  tty: Rework receive flow control char logic
  pcmcia: synclink_cs: Don't allow CS5-6
  serial: stm32-usart: Correct CSIZE, bits, and parity
  serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
  serial: sifive: Sanitize CSIZE and c_iflag
  serial: sh-sci: Don't allow CS5-6
  serial: txx9: Don't allow CS5-6
  serial: rda-uart: Don't allow CS5-6
  serial: digicolor-usart: Don't allow CS5-6
  serial: uartlite: Fix BRKINT clearing
  serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
  serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
  tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
  dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
  Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  serial: msm_serial: disable interrupts in __msm_console_write()
  serial: meson: acquire port->lock in startup()
  serial: 8250_dw: Use dev_err_probe()
  serial: 8250_dw: Use devm_add_action_or_reset()
  ...
Merge tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux 2022-05-31T21:10:54+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-05-31T21:10:54+00:00 35b51afd23c98e2f055ac563aca36173a12588b9 Pull RISC-V updates from Palmer Dabbelt: - Support for the Svpbmt extension, which allows memory attributes to be encoded in pages - Support for the Allwinner D1's implementation of page-based memory attributes - Support for running rv32 binaries on rv64 systems, via the compat subsystem - Support for kexec_file() - Support for the new generic ticket-based spinlocks, which allows us to also move to qrwlock. These should have already gone in through the asm-geneic tree as well - A handful of cleanups and fixes, include some larger ones around atomics and XIP * tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits) RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add] riscv: compat: Using seperated vdso_maps for compat_vdso_info RISC-V: Fix the XIP build RISC-V: Split out the XIP fixups into their own file RISC-V: ignore xipImage RISC-V: Avoid empty create_*_mapping definitions riscv: Don't output a bogus mmu-type on a no MMU kernel riscv: atomic: Add custom conditional atomic operation implementation riscv: atomic: Optimize dec_if_positive functions riscv: atomic: Cleanup unnecessary definition RISC-V: Load purgatory in kexec_file RISC-V: Add purgatory RISC-V: Support for kexec_file on panic RISC-V: Add kexec_file support RISC-V: use memcpy for kexec_file mode kexec_file: Fix kexec_file.c build error for riscv platform riscv: compat: Add COMPAT Kbuild skeletal support riscv: compat: ptrace: Add compat_arch_ptrace implement riscv: compat: signal: Add rt_frame implementation riscv: add memory-type errata for T-Head ... 
Pull RISC-V updates from Palmer Dabbelt:

 - Support for the Svpbmt extension, which allows memory attributes to
   be encoded in pages

 - Support for the Allwinner D1's implementation of page-based memory
   attributes

 - Support for running rv32 binaries on rv64 systems, via the compat
   subsystem

 - Support for kexec_file()

 - Support for the new generic ticket-based spinlocks, which allows us
   to also move to qrwlock. These should have already gone in through
   the asm-geneic tree as well

 - A handful of cleanups and fixes, include some larger ones around
   atomics and XIP

* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
  RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
  riscv: compat: Using seperated vdso_maps for compat_vdso_info
  RISC-V: Fix the XIP build
  RISC-V: Split out the XIP fixups into their own file
  RISC-V: ignore xipImage
  RISC-V: Avoid empty create_*_mapping definitions
  riscv: Don't output a bogus mmu-type on a no MMU kernel
  riscv: atomic: Add custom conditional atomic operation implementation
  riscv: atomic: Optimize dec_if_positive functions
  riscv: atomic: Cleanup unnecessary definition
  RISC-V: Load purgatory in kexec_file
  RISC-V: Add purgatory
  RISC-V: Support for kexec_file on panic
  RISC-V: Add kexec_file support
  RISC-V: use memcpy for kexec_file mode
  kexec_file: Fix kexec_file.c build error for riscv platform
  riscv: compat: Add COMPAT Kbuild skeletal support
  riscv: compat: ptrace: Add compat_arch_ptrace implement
  riscv: compat: signal: Add rt_frame implementation
  riscv: add memory-type errata for T-Head
  ...
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 2022-05-25T19:22:58+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-05-25T19:22:58+00:00 7e062cda7d90543ac8c7700fc7c5527d0c0f22ad Pull networking updates from Jakub Kicinski: "Core ---- - Support TCPv6 segmentation offload with super-segments larger than 64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP). - Generalize skb freeing deferral to per-cpu lists, instead of per-socket lists. - Add a netdev statistic for packets dropped due to L2 address mismatch (rx_otherhost_dropped). - Continue work annotating skb drop reasons. - Accept alternative netdev names (ALT_IFNAME) in more netlink requests. - Add VLAN support for AF_PACKET SOCK_RAW GSO. - Allow receiving skb mark from the socket as a cmsg. - Enable memcg accounting for veth queues, sysctl tables and IPv6. BPF --- - Add libbpf support for User Statically-Defined Tracing (USDTs). - Speed up symbol resolution for kprobes multi-link attachments. - Support storing typed pointers to referenced and unreferenced objects in BPF maps. - Add support for BPF link iterator. - Introduce access to remote CPU map elements in BPF per-cpu map. - Allow middle-of-the-road settings for the kernel.unprivileged_bpf_disabled sysctl. - Implement basic types of dynamic pointers e.g. to allow for dynamically sized ringbuf reservations without extra memory copies. Protocols --------- - Retire port only listening_hash table, add a second bind table hashed by port and address. Avoid linear list walk when binding to very popular ports (e.g. 443). - Add bridge FDB bulk flush filtering support allowing user space to remove all FDB entries matching a condition. - Introduce accept_unsolicited_na sysctl for IPv6 to implement router-side changes for RFC9131. - Support for MPTCP path manager in user space. - Add MPTCP support for fallback to regular TCP for connections that have never connected additional subflows or transmitted out-of-sequence data (partial support for RFC8684 fallback). - Avoid races in MPTCP-level window tracking, stabilize and improve throughput. - Support lockless operation of GRE tunnels with seq numbers enabled. - WiFi support for host based BSS color collision detection. - Add support for SO_TXTIME/SCM_TXTIME on CAN sockets. - Support transmission w/o flow control in CAN ISOTP (ISO 15765-2). - Support zero-copy Tx with TLS 1.2 crypto offload (sendfile). - Allow matching on the number of VLAN tags via tc-flower. - Add tracepoint for tcp_set_ca_state(). Driver API ---------- - Improve error reporting from classifier and action offload. - Add support for listing line cards in switches (devlink). - Add helpers for reporting page pool statistics with ethtool -S. - Add support for reading clock cycles when using PTP virtual clocks, instead of having the driver convert to time before reporting. This makes it possible to report time from different vclocks. - Support configuring low-latency Tx descriptor push via ethtool. - Separate Clause 22 and Clause 45 MDIO accesses more explicitly. New hardware / drivers ---------------------- - Ethernet: - Marvell's Octeon NIC PCI Endpoint support (octeon_ep) - Sunplus SP7021 SoC (sp7021_emac) - Add support for Renesas RZ/V2M (in ravb) - Add support for MediaTek mt7986 switches (in mtk_eth_soc) - Ethernet PHYs: - ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting) - TI DP83TD510 PHY - Microchip LAN8742/LAN88xx PHYs - WiFi: - Driver for pureLiFi X, XL, XC devices (plfxlc) - Driver for Silicon Labs devices (wfx) - Support for WCN6750 (in ath11k) - Support Realtek 8852ce devices (in rtw89) - Mobile: - MediaTek T700 modems (Intel 5G 5000 M.2 cards) - CAN: - ctucanfd: add support for CTU CAN FD open-source IP core from Czech Technical University in Prague Drivers ------- - Delete a number of old drivers still using virt_to_bus(). - Ethernet NICs: - intel: support TSO on tunnels MPLS - broadcom: support multi-buffer XDP - nfp: support VF rate limiting - sfc: use hardware tx timestamps for more than PTP - mlx5: multi-port eswitch support - hyper-v: add support for XDP_REDIRECT - atlantic: XDP support (including multi-buffer) - macb: improve real-time perf by deferring Tx processing to NAPI - High-speed Ethernet switches: - mlxsw: implement basic line card information querying - prestera: add support for traffic policing on ingress and egress - Embedded Ethernet switches: - lan966x: add support for packet DMA (FDMA) - lan966x: add support for PTP programmable pins - ti: cpsw_new: enable bc/mc storm prevention - Qualcomm 802.11ax WiFi (ath11k): - Wake-on-WLAN support for QCA6390 and WCN6855 - device recovery (firmware restart) support - support setting Specific Absorption Rate (SAR) for WCN6855 - read country code from SMBIOS for WCN6855/QCA6390 - enable keep-alive during WoWLAN suspend - implement remain-on-channel support - MediaTek WiFi (mt76): - support Wireless Ethernet Dispatch offloading packet movement between the Ethernet switch and WiFi interfaces - non-standard VHT MCS10-11 support - mt7921 AP mode support - mt7921 IPv6 NS offload support - Ethernet PHYs: - micrel: ksz9031/ksz9131: cabletest support - lan87xx: SQI support for T1 PHYs - lan937x: add interrupt support for link detection" * tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits) ptp: ocp: Add firmware header checks ptp: ocp: fix PPS source selector debugfs reporting ptp: ocp: add .init function for sma_op vector ptp: ocp: vectorize the sma accessor functions ptp: ocp: constify selectors ptp: ocp: parameterize input/output sma selectors ptp: ocp: revise firmware display ptp: ocp: add Celestica timecard PCI ids ptp: ocp: Remove #ifdefs around PCI IDs ptp: ocp: 32-bit fixups for pci start address Revert "net/smc: fix listen processing for SMC-Rv2" ath6kl: Use cc-disable-warning to disable -Wdangling-pointer selftests/bpf: Dynptr tests bpf: Add dynptr data slices bpf: Add bpf_dynptr_read and bpf_dynptr_write bpf: Dynptr support for ring buffers bpf: Add bpf_dynptr_from_mem for local dynptrs bpf: Add verifier support for dynptrs bpf: Suppress 'passing zero to PTR_ERR' warning bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack ... 
Pull networking updates from Jakub Kicinski:
 "Core
  ----

   - Support TCPv6 segmentation offload with super-segments larger than
     64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).

   - Generalize skb freeing deferral to per-cpu lists, instead of
     per-socket lists.

   - Add a netdev statistic for packets dropped due to L2 address
     mismatch (rx_otherhost_dropped).

   - Continue work annotating skb drop reasons.

   - Accept alternative netdev names (ALT_IFNAME) in more netlink
     requests.

   - Add VLAN support for AF_PACKET SOCK_RAW GSO.

   - Allow receiving skb mark from the socket as a cmsg.

   - Enable memcg accounting for veth queues, sysctl tables and IPv6.

  BPF
  ---

   - Add libbpf support for User Statically-Defined Tracing (USDTs).

   - Speed up symbol resolution for kprobes multi-link attachments.

   - Support storing typed pointers to referenced and unreferenced
     objects in BPF maps.

   - Add support for BPF link iterator.

   - Introduce access to remote CPU map elements in BPF per-cpu map.

   - Allow middle-of-the-road settings for the
     kernel.unprivileged_bpf_disabled sysctl.

   - Implement basic types of dynamic pointers e.g. to allow for
     dynamically sized ringbuf reservations without extra memory copies.

  Protocols
  ---------

   - Retire port only listening_hash table, add a second bind table
     hashed by port and address. Avoid linear list walk when binding to
     very popular ports (e.g. 443).

   - Add bridge FDB bulk flush filtering support allowing user space to
     remove all FDB entries matching a condition.

   - Introduce accept_unsolicited_na sysctl for IPv6 to implement
     router-side changes for RFC9131.

   - Support for MPTCP path manager in user space.

   - Add MPTCP support for fallback to regular TCP for connections that
     have never connected additional subflows or transmitted
     out-of-sequence data (partial support for RFC8684 fallback).

   - Avoid races in MPTCP-level window tracking, stabilize and improve
     throughput.

   - Support lockless operation of GRE tunnels with seq numbers enabled.

   - WiFi support for host based BSS color collision detection.

   - Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.

   - Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).

   - Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).

   - Allow matching on the number of VLAN tags via tc-flower.

   - Add tracepoint for tcp_set_ca_state().

  Driver API
  ----------

   - Improve error reporting from classifier and action offload.

   - Add support for listing line cards in switches (devlink).

   - Add helpers for reporting page pool statistics with ethtool -S.

   - Add support for reading clock cycles when using PTP virtual clocks,
     instead of having the driver convert to time before reporting. This
     makes it possible to report time from different vclocks.

   - Support configuring low-latency Tx descriptor push via ethtool.

   - Separate Clause 22 and Clause 45 MDIO accesses more explicitly.

  New hardware / drivers
  ----------------------

   - Ethernet:
      - Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
      - Sunplus SP7021 SoC (sp7021_emac)
      - Add support for Renesas RZ/V2M (in ravb)
      - Add support for MediaTek mt7986 switches (in mtk_eth_soc)

   - Ethernet PHYs:
      - ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
      - TI DP83TD510 PHY
      - Microchip LAN8742/LAN88xx PHYs

   - WiFi:
      - Driver for pureLiFi X, XL, XC devices (plfxlc)
      - Driver for Silicon Labs devices (wfx)
      - Support for WCN6750 (in ath11k)
      - Support Realtek 8852ce devices (in rtw89)

   - Mobile:
      - MediaTek T700 modems (Intel 5G 5000 M.2 cards)

   - CAN:
      - ctucanfd: add support for CTU CAN FD open-source IP core from
        Czech Technical University in Prague

  Drivers
  -------

   - Delete a number of old drivers still using virt_to_bus().

   - Ethernet NICs:
      - intel: support TSO on tunnels MPLS
      - broadcom: support multi-buffer XDP
      - nfp: support VF rate limiting
      - sfc: use hardware tx timestamps for more than PTP
      - mlx5: multi-port eswitch support
      - hyper-v: add support for XDP_REDIRECT
      - atlantic: XDP support (including multi-buffer)
      - macb: improve real-time perf by deferring Tx processing to NAPI

   - High-speed Ethernet switches:
      - mlxsw: implement basic line card information querying
      - prestera: add support for traffic policing on ingress and egress

   - Embedded Ethernet switches:
      - lan966x: add support for packet DMA (FDMA)
      - lan966x: add support for PTP programmable pins
      - ti: cpsw_new: enable bc/mc storm prevention

   - Qualcomm 802.11ax WiFi (ath11k):
      - Wake-on-WLAN support for QCA6390 and WCN6855
      - device recovery (firmware restart) support
      - support setting Specific Absorption Rate (SAR) for WCN6855
      - read country code from SMBIOS for WCN6855/QCA6390
      - enable keep-alive during WoWLAN suspend
      - implement remain-on-channel support

   - MediaTek WiFi (mt76):
      - support Wireless Ethernet Dispatch offloading packet movement
        between the Ethernet switch and WiFi interfaces
      - non-standard VHT MCS10-11 support
      - mt7921 AP mode support
      - mt7921 IPv6 NS offload support

   - Ethernet PHYs:
      - micrel: ksz9031/ksz9131: cabletest support
      - lan87xx: SQI support for T1 PHYs
      - lan937x: add interrupt support for link detection"

* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
  ptp: ocp: Add firmware header checks
  ptp: ocp: fix PPS source selector debugfs reporting
  ptp: ocp: add .init function for sma_op vector
  ptp: ocp: vectorize the sma accessor functions
  ptp: ocp: constify selectors
  ptp: ocp: parameterize input/output sma selectors
  ptp: ocp: revise firmware display
  ptp: ocp: add Celestica timecard PCI ids
  ptp: ocp: Remove #ifdefs around PCI IDs
  ptp: ocp: 32-bit fixups for pci start address
  Revert "net/smc: fix listen processing for SMC-Rv2"
  ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
  selftests/bpf: Dynptr tests
  bpf: Add dynptr data slices
  bpf: Add bpf_dynptr_read and bpf_dynptr_write
  bpf: Dynptr support for ring buffers
  bpf: Add bpf_dynptr_from_mem for local dynptrs
  bpf: Add verifier support for dynptrs
  bpf: Suppress 'passing zero to PTR_ERR' warning
  bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
  ...