Fixes for 4.12.  This is a bit bigger than usual since it's 3 weeks
worth of fixes and most of these changes are for vega10 which is
new for 4.12 and still in a fair amount of flux.  It looks like
you missed my last pull request, so those patches are included here
as well.  Highlights:
- Lots of vega10 fixes
- Fix interruptable wait mixup
- Fan control method fixes
- Misc display fixes for radeon and amdgpu
- Misc bug fixes

* 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux: (132 commits)
  drm/amd/powerplay: refine pwm1_enable callback functions for CI.
  drm/amd/powerplay: refine pwm1_enable callback functions for vi.
  drm/amd/powerplay: refine pwm1_enable callback functions for Vega10.
  drm/amdgpu: refine amdgpu pwm1_enable sysfs interface.
  drm/amdgpu: add amd fan ctrl mode enums.
  drm/amd/powerplay: add more smu message on Vega10.
  drm/amdgpu: fix dependency issue
  drm/amd: fix init order of sched job
  drm/amdgpu: add some additional vega10 pci ids
  drm/amdgpu/soc15: use atomfirmware for setting bios scratch for reset
  drm/amdgpu/atomfirmware: add function to update engine hang status
  drm/radeon: only warn once in radeon_ttm_bo_destroy if va list not empty
  drm/amdgpu: fix mutex list null pointer reference
  drm/amd/powerplay: fix bug sclk/mclk level can't be set on vega10.
  drm/amd/powerplay: Setup sw CTF to allow graceful exit when temperature exceeds maximum.
  drm/amd/powerplay: delete dead code in powerplay.
  drm/amdgpu: Use less generic enum definitions
  drm/amdgpu/gfx9: derive tile pipes from golden settings
  drm/amdgpu/gfx: drop max_gs_waves_per_vgt
  drm/amd/powerplay: disable engine spread spectrum feature on Vega10.
  ...

Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.

In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.

After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/aspeed-lpc-ctrl.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/can/vxcan.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/cryptouser.h
linux/fsmap.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nbd-netlink.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/switchtec_ioctl.h
linux/vfio_ccw.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h

Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).

Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all
subdirs with a pure makefile command.

For the record, note that exported files for asm directories are a mix of
files listed by:
 - include/uapi/asm-generic/Kbuild.asm;
 - arch/<arch>/include/uapi/asm/Kbuild;
 - arch/<arch>/include/asm/Kbuild.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Salter <msalter@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

drm/tegra: Changes for v4.12-rc1

This contains various fixes to the host1x driver as well as a plug for a
leak of kernel pointers to userspace.

A fairly big addition this time around is the Video Image Composer (VIC)
support that can be used to accelerate some 2D and image compositing
operations.

Furthermore the driver now supports FB modifiers, so we no longer rely
on a custom IOCTL to set those.

Finally this contains a few preparatory patches for Tegra186 support
which unfortunately didn't quite make it this time, but will hopefully
be ready for v4.13.

* tag 'drm/tegra/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux:
  gpu: host1x: Fix host1x driver shutdown
  gpu: host1x: Support module reset
  gpu: host1x: Sort includes alphabetically
  drm/tegra: Add VIC support
  dt-bindings: Add bindings for the Tegra VIC
  drm/tegra: Add falcon helper library
  drm/tegra: Add Tegra DRM allocation API
  drm/tegra: Add tiling FB modifiers
  drm/tegra: Don't leak kernel pointer to userspace
  drm/tegra: Protect IOMMU operations by mutex
  drm/tegra: Enable IOVA API when IOMMU support is enabled
  gpu: host1x: Add IOMMU support
  gpu: host1x: Fix potential out-of-bounds access
  iommu/iova: Fix compile error with CONFIG_IOMMU_IOVA=m
  iommu: Add dummy implementations for !IOMMU_IOVA
  MAINTAINERS: Add related headers to IOMMU section
  iommu/iova: Consolidate code for adding new node to iovad domain rbtree

v2: 64-bit aligned for gpu info
v3: squash in wave_front_fix

Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Qiang Yu <Qiang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

sequence is protected by spinlock so don't access sequence
in paramter seq when invoking this function.

~0 means to get the latest sequence number and 0 means none to
get.

Change-Id: Ib7a03f3cf5594deeb4ad333cc59b47a6bddfd1ad
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Noteworthy changes this time:
1) 4k support for newer chips (ganging up hwpipes and mixers)
2) using OPP bindings for gpu
3) more prep work towards per-process pagetables

* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (47 commits)
  msm/drm: gpu: Dynamically locate the clocks from the device tree
  drm/msm: gpu: Use OPP tables if we can
  drm/msm: Hard code the GPU "slow frequency"
  drm/msm: Add MSM_PARAM_GMEM_BASE
  drm/msm: Reference count address spaces
  drm/msm: Make sure to detach the MMU during GPU cleanup
  drm/msm/mdp5: Enable 3D mux in mdp5_ctl
  drm/msm/mdp5: Reset CTL blend registers before configuring them
  drm/msm/mdp5: Assign 'right' mixer to CRTC state
  drm/msm/mdp5: Stage border out on base stage if CRTC has 2 LMs
  drm/msm/mdp5: Stage right side hwpipes on Right-side Layer Mixer
  drm/msm/mdp5: Prepare Layer Mixers for source split
  drm/msm/mdp5: Configure 'right' hwpipe
  drm/msm/mdp5: Assign a 'right hwpipe' to plane state
  drm/msm/mdp5: Create mdp5_hwpipe_mode_set
  drm/msm/mdp5: Add optional 'right' Layer Mixer in CRTC state
  drm/msm/mdp5: Add a CAP for Source Split
  drm/msm/mdp5: Remove mixer/intf pointers from mdp5_ctl
  drm/msm/mdp5: Start using parameters from CRTC state
  drm/msm/mdp5: Add more stuff to CRTC state
  ...

Last drm-misc-next pull req for 4.12

Core changes:
 - fb_helper checkpatch cleanup and simplified _add_one_connector() (Thierry)
 - drm_ioctl and drm_sysfs improved/gained documentation (Daniel)
 - [ABI] Repurpose reserved field in drm_event_vblank for crtc_id (Ander)
 - Plumb acquire ctx through legacy paths to avoid lock_all and legacy_backoff
   (Daniel)
 - Add connector_atomic_check to check conn constraints on modeset (Maarten)
 - Add drm_of_find_panel_or_bridge to remove boilerplate in drivers (Rob)

Driver changes:
 - meson moved to drm-misc (Neil)
 - Added support for Amlogic GX SoCs in dw-hdmi (Neil)
 - Rockchip unbind actually cleans up the things bind initializes (Jeffy)
 - A couple misc fixes in virtio, dw-hdmi

NOTE: this also includes a backmerge of drm-next as well rc5 (we needed vmwgfx
      as well as the new synopsys media formats)

* tag 'drm-misc-next-2017-04-07' of git://anongit.freedesktop.org/git/drm-misc: (77 commits)
  Revert "drm: Don't allow interruptions when opening debugfs/crc"
  drm: Only take cursor locks when the cursor plane exists
  drm/vmwgfx: Fix fbdev emulation using legacy functions
  drm/rockchip: Shutdown all crtcs when unbinding drm
  drm/rockchip: Reorder drm bind/unbind sequence
  drm/rockchip: analogix_dp: Disable clock when unbinding
  drm/rockchip: vop: Unprepare clocks when unbinding
  drm/rockchip: vop: Enable pm domain before vop_initial
  drm/rockchip: cdn-dp: Don't unregister audio dev when unbinding
  drm/rockchip: cdn-dp: Don't try to release firmware when not loaded
  drm: bridge: analogix: Destroy connector & encoder when unbinding
  drm: bridge: analogix: Disable clock when unbinding
  drm: bridge: analogix: Unregister dp aux when unbinding
  drm: bridge: analogix: Detach panel when unbinding analogix dp
  drm: Don't allow interruptions when opening debugfs/crc
  drm/virtio: don't leak bo on drm_gem_object_init failure
  drm: bridge: dw-hdmi: fix input format/encoding from plat_data
  drm: omap: use common OF graph helpers
  drm: convert drivers to use drm_of_find_panel_or_bridge
  drm: convert drivers to use of_graph_get_remote_node
  ...

User space needs to know where the GMEM whole starts so that they
can set up the addressing correctly.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Highlights:
- Cooling device support from Russell, to allow GPU throttling on system
thermal overload.
- Explicit fencing support from Philipp, implemented in a similar way to
drm/msm.

* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux:
  drm/etnaviv: submit support for out-fences
  drm/etnaviv: return GPU fence through the submit structure
  drm/etnaviv: submit support for in-fences
  drm/etnaviv: add etnaviv cooling device
  drm/etnaviv: switch to postclose
  drm/etnaviv: add lockdep assert to fence allocation