In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other
things, update the L4 checksum after reverse SNATing IPv6 packets. That
use case is however not currently supported and leads to invalid
skb->csum values in some cases. This patch adds support for IPv6 address
changes in bpf_l4_csum_update via a new flag.

When calling bpf_l4_csum_replace in Cilium, it ends up calling
inet_proto_csum_replace_by_diff:

    1:  void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb,
    2:                                       __wsum diff, bool pseudohdr)
    3:  {
    4:      if (skb->ip_summed != CHECKSUM_PARTIAL) {
    5:          csum_replace_by_diff(sum, diff);
    6:          if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
    7:              skb->csum = ~csum_sub(diff, skb->csum);
    8:      } else if (pseudohdr) {
    9:          *sum = ~csum_fold(csum_add(diff, csum_unfold(*sum)));
    10:     }
    11: }

The bug happens when we're in the CHECKSUM_COMPLETE state. We've just
updated one of the IPv6 addresses. The helper now updates the L4 header
checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't.

For an IPv6 packet, the updates of the IPv6 address and of the L4
checksum will cancel each other. The checksums are set such that
computing a checksum over the packet including its checksum will result
in a sum of 0. So the same is true here when we update the L4 checksum
on line 5. We'll update it as to cancel the previous IPv6 address
update. Hence skb->csum should remain untouched in this case.

The same bug doesn't affect IPv4 packets because, in that case, three
fields are updated: the IPv4 address, the IP checksum, and the L4
checksum. The change to the IPv4 address and one of the checksums still
cancel each other in skb->csum, but we're left with one checksum update
and should therefore update skb->csum accordingly. That's exactly what
inet_proto_csum_replace_by_diff does.

This special case for IPv6 L4 checksums is also described atop
inet_proto_csum_replace16, the function we should be using in this case.

This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6,
to indicate that we're updating the L4 checksum of an IPv6 packet. When
the flag is set, inet_proto_csum_replace_by_diff will skip the
skb->csum update.

Fixes: 7d672345ed295 ("bpf: add generic bpf_csum_diff helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull bpf updates from Alexei Starovoitov:

 - Fix and improve BTF deduplication of identical BTF types (Alan
   Maguire and Andrii Nakryiko)

 - Support up to 12 arguments in BPF trampoline on arm64 (Xu Kuohai and
   Alexis Lothoré)

 - Support load-acquire and store-release instructions in BPF JIT on
   riscv64 (Andrea Parri)

 - Fix uninitialized values in BPF_{CORE,PROBE}_READ macros (Anton
   Protopopov)

 - Streamline allowed helpers across program types (Feng Yang)

 - Support atomic update for hashtab of BPF maps (Hou Tao)

 - Implement json output for BPF helpers (Ihor Solodrai)

 - Several s390 JIT fixes (Ilya Leoshkevich)

 - Various sockmap fixes (Jiayuan Chen)

 - Support mmap of vmlinux BTF data (Lorenz Bauer)

 - Support BPF rbtree traversal and list peeking (Martin KaFai Lau)

 - Tests for sockmap/sockhash redirection (Michal Luczaj)

 - Introduce kfuncs for memory reads into dynptrs (Mykyta Yatsenko)

 - Add support for dma-buf iterators in BPF (T.J. Mercier)

 - The verifier support for __bpf_trap() (Yonghong Song)

* tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (135 commits)
  bpf, arm64: Remove unused-but-set function and variable.
  selftests/bpf: Add tests with stack ptr register in conditional jmp
  bpf: Do not include stack ptr register in precision backtracking bookkeeping
  selftests/bpf: enable many-args tests for arm64
  bpf, arm64: Support up to 12 function arguments
  bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
  bpf: Avoid __bpf_prog_ret0_warn when jit fails
  bpftool: Add support for custom BTF path in prog load/loadall
  selftests/bpf: Add unit tests with __bpf_trap() kfunc
  bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
  bpf: Remove special_kfunc_set from verifier
  selftests/bpf: Add test for open coded dmabuf_iter
  selftests/bpf: Add test for dmabuf_iter
  bpf: Add open coded dmabuf iterator
  bpf: Add dmabuf iterator
  dma-buf: Rename debugfs symbols
  bpf: Fix error return value in bpf_copy_from_user_dynptr
  libbpf: Use mmap to parse vmlinux BTF from sysfs
  selftests: bpf: Add a test for mmapable vmlinux BTF
  btf: Allow mmap of vmlinux btf
  ...

Adding support to retrieve ref_ctr_offset for uprobe perf link,
which got somehow omitted from the initial uprobe link info changes.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20250509153539.779599-2-jolsa@kernel.org

When switching network namespaces with the bpf_redirect_peer helper, the
skb->mark and skb->tstamp fields are not zeroed out like they can be on
a typical netns switch. This patch clarifies that in the helper
description.

Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/ccc86af26d43c5c0b776bcba2601b7479c0d46d0.1746460653.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In the bpf_l4_csum_replace helper, the BPF_F_PSEUDO_HDR flag should only
be set if the modified header field is part of the pseudo-header.

If you modify for example the UDP ports and pass BPF_F_PSEUDO_HDR,
inet_proto_csum_replace4 will update skb->csum even though it shouldn't
(the port and the UDP checksum updates null each other).

Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/5126ef84ba75425b689482cbc98bffe75e5d8ab0.1744102490.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

BPF_F_RECOMPUTE_CSUM doesn't update the actual L3 and L4 checksums in
the packet, but simply updates skb->csum (according to skb->ip_summed).
This patch clarifies that to avoid confusions.

Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/ff6895d42936f03dbb82334d8bcfd50e00c79086.1744102490.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The map_fd field of the bpf_attr union is used in the BPF_MAP_FREEZE
syscall.  Explicitly mention this in the comments.

Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250331203618.1973691-2-a.s.protopopov@gmail.com

Pull bpf updates from Alexei Starovoitov:
 "For this merge window we're splitting BPF pull request into three for
  higher visibility: main changes, res_spin_lock, try_alloc_pages.

  These are the main BPF changes:

   - Add DFA-based live registers analysis to improve verification of
     programs with loops (Eduard Zingerman)

   - Introduce load_acquire and store_release BPF instructions and add
     x86, arm64 JIT support (Peilin Ye)

   - Fix loop detection logic in the verifier (Eduard Zingerman)

   - Drop unnecesary lock in bpf_map_inc_not_zero() (Eric Dumazet)

   - Add kfunc for populating cpumask bits (Emil Tsalapatis)

   - Convert various shell based tests to selftests/bpf/test_progs
     format (Bastien Curutchet)

   - Allow passing referenced kptrs into struct_ops callbacks (Amery
     Hung)

   - Add a flag to LSM bpf hook to facilitate bpf program signing
     (Blaise Boscaccy)

   - Track arena arguments in kfuncs (Ihor Solodrai)

   - Add copy_remote_vm_str() helper for reading strings from remote VM
     and bpf_copy_from_user_task_str() kfunc (Jordan Rome)

   - Add support for timed may_goto instruction (Kumar Kartikeya
     Dwivedi)

   - Allow bpf_get_netns_cookie() int cgroup_skb programs (Mahe Tardy)

   - Reduce bpf_cgrp_storage_busy false positives when accessing cgroup
     local storage (Martin KaFai Lau)

   - Introduce bpf_dynptr_copy() kfunc (Mykyta Yatsenko)

   - Allow retrieving BTF data with BTF token (Mykyta Yatsenko)

   - Add BPF kfuncs to set and get xattrs with 'security.bpf.' prefix
     (Song Liu)

   - Reject attaching programs to noreturn functions (Yafang Shao)

   - Introduce pre-order traversal of cgroup bpf programs (Yonghong
     Song)"

* tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (186 commits)
  selftests/bpf: Add selftests for load-acquire/store-release when register number is invalid
  bpf: Fix out-of-bounds read in check_atomic_load/store()
  libbpf: Add namespace for errstr making it libbpf_errstr
  bpf: Add struct_ops context information to struct bpf_prog_aux
  selftests/bpf: Sanitize pointer prior fclose()
  selftests/bpf: Migrate test_xdp_vlan.sh into test_progs
  selftests/bpf: test_xdp_vlan: Rename BPF sections
  bpf: clarify a misleading verifier error message
  selftests/bpf: Add selftest for attaching fexit to __noreturn functions
  bpf: Reject attaching fexit/fmod_ret to __noreturn functions
  bpf: Only fails the busy counter check in bpf_cgrp_storage_get if it creates storage
  bpf: Make perf_event_read_output accessible in all program types.
  bpftool: Using the right format specifiers
  bpftool: Add -Wformat-signedness flag to detect format errors
  selftests/bpf: Test freplace from user namespace
  libbpf: Pass BPF token from find_prog_btf_id to BPF_BTF_GET_FD_BY_ID
  bpf: Return prog btf_id without capable check
  bpf: BPF token support for BPF_BTF_GET_FD_BY_ID
  bpf, x86: Fix objtool warning for timed may_goto
  bpf: Check map->record at the beginning of check_and_free_fields()
  ...

Currently BPF_BTF_GET_FD_BY_ID requires CAP_SYS_ADMIN, which does not
allow running it from user namespace. This creates a problem when
freplace program running from user namespace needs to query target
program BTF.
This patch relaxes capable check from CAP_SYS_ADMIN to CAP_BPF and adds
support for BPF token that can be passed in attributes to syscall.

Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250317174039.161275-2-mykyta.yatsenko5@gmail.com

Introduce BPF instructions with load-acquire and store-release
semantics, as discussed in [1].  Define 2 new flags:

  #define BPF_LOAD_ACQ    0x100
  #define BPF_STORE_REL   0x110

A "load-acquire" is a BPF_STX | BPF_ATOMIC instruction with the 'imm'
field set to BPF_LOAD_ACQ (0x100).

Similarly, a "store-release" is a BPF_STX | BPF_ATOMIC instruction with
the 'imm' field set to BPF_STORE_REL (0x110).

Unlike existing atomic read-modify-write operations that only support
BPF_W (32-bit) and BPF_DW (64-bit) size modifiers, load-acquires and
store-releases also support BPF_B (8-bit) and BPF_H (16-bit).  As an
exception, however, 64-bit load-acquires/store-releases are not
supported on 32-bit architectures (to fix a build error reported by the
kernel test robot).

An 8- or 16-bit load-acquire zero-extends the value before writing it to
a 32-bit register, just like ARM64 instruction LDARH and friends.

Similar to existing atomic read-modify-write operations, misaligned
load-acquires/store-releases are not allowed (even if
BPF_F_ANY_ALIGNMENT is set).

As an example, consider the following 64-bit load-acquire BPF
instruction (assuming little-endian):

  db 10 00 00 00 01 00 00  r0 = load_acquire((u64 *)(r1 + 0x0))

  opcode (0xdb): BPF_ATOMIC | BPF_DW | BPF_STX
  imm (0x00000100): BPF_LOAD_ACQ

Similarly, a 16-bit BPF store-release:

  cb 21 00 00 10 01 00 00  store_release((u16 *)(r1 + 0x0), w2)

  opcode (0xcb): BPF_ATOMIC | BPF_H | BPF_STX
  imm (0x00000110): BPF_STORE_REL

In arch/{arm64,s390,x86}/net/bpf_jit_comp.c, have
bpf_jit_supports_insn(..., /*in_arena=*/true) return false for the new
instructions, until the corresponding JIT compiler supports them in
arena.

[1] https://lore.kernel.org/all/20240729183246.4110549-1-yepeilin@google.com/

Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/a217f46f0e445fbd573a1a024be5c6bf1d5fe716.1741049567.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>