linux-toradex.git/include/uapi/linux/cec.h, branch v5.10-rc3

media: cec: expose the new connector info API

2019-10-01T20:19:41+00:00

Until now the connector info API was a kernel-internal API only.
This moves it to the public API and adds the new ioctl to retrieve
this information.

Signed-off-by: Dariusz Marcinkiewicz 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: cec.h: CEC_OP_REC_FLAG_ values were swapped

2019-10-01T20:18:56+00:00

CEC_OP_REC_FLAG_NOT_USED is 0 and CEC_OP_REC_FLAG_USED is 1, not the
other way around.

Signed-off-by: Hans Verkuil 
Reported-by: Jiunn Chang 
Cc:       # for v4.10 and up
Signed-off-by: Mauro Carvalho Chehab

media: uapi/linux/cec.h: add defines for the CEC UI Command Operand

2019-10-01T20:17:51+00:00

These defines were never added to this CEC header, likely due
to laziness on the part of the original author, i.e. me.

But it is useful to have them, so add them.

Also update the cec.h.rst.exceptions file to avoid errors when
building the documentation.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: cec: add CEC_MSG_FL_RAW flag and msg_is_raw helper function

2019-05-23T09:32:40+00:00

This adds the userspace API to send raw unchecked CEC messages.
This will require root permissions.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: cec: add new tx/rx status bits to detect aborts/timeouts

2018-10-05T15:22:39+00:00

If the HDMI cable is disconnected or the CEC adapter is manually
unconfigured, then all pending transmits and wait-for-replies are
aborted. Signal this with new status bits (CEC_RX/TX_STATUS_ABORTED).

If due to (usually) a driver bug a transmit never ends (i.e. the
transmit_done was never called by the driver), then when this times
out the message is marked with CEC_TX_STATUS_TIMEOUT.

This should not happen and is an indication of a driver bug.

Without a separate status bit for this it was impossible to detect
this from userspace.

The 'transmit timed out' kernel message is now a warning, so this
should be more prominent in the kernel log as well.

Signed-off-by: Hans Verkuil 
Cc:       # for v4.18 and up
Signed-off-by: Mauro Carvalho Chehab

media: uapi/linux/cec.h: add 5V events

2018-07-25T10:59:23+00:00

Add two new events to signal when the 5V line goes high or low.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: include/(uapi/)media: add SPDX license info

2018-02-14T18:23:51+00:00

Replace the old license information with the corresponding SPDX
license for those headers that I authored.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

Merge tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2017-11-16T04:30:12+00:00

Pull media updates from Mauro Carvalho Chehab:

 - Documentation for digital TV (both kAPI and uAPI) are now in sync
   with the implementation (except for legacy/deprecated ioctls). This
   is a major step, as there were always a gap there

 - New sensor driver: imx274

 - New cec driver: cec-gpio

 - New platform driver for rockship rga and tegra CEC

 - New RC driver: tango-ir

 - Several cleanups at atomisp driver

 - Core improvements for RC, CEC, V4L2 async probing support and DVB

 - Lots of drivers cleanup, fixes and improvements.

* tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits)
  dvb_frontend: don't use-after-free the frontend struct
  media: dib0700: fix invalid dvb_detach argument
  media: v4l2-ctrls: Don't validate BITMASK twice
  media: s5p-mfc: fix lockdep warning
  media: dvb-core: always call invoke_release() in fe_free()
  media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep
  media: au0828: make const array addr_list static
  media: cx88: make const arrays default_addr_list and pvr2000_addr_list static
  media: drxd: make const array fastIncrDecLUT static
  media: usb: fix spelling mistake: "synchronuously" -> "synchronously"
  media: ddbridge: fix build warnings
  media: av7110: avoid 2038 overflow in debug print
  media: Don't do DMA on stack for firmware upload in the AS102 driver
  media: v4l: async: fix unregister for implicitly registered sub-device notifiers
  media: v4l: async: fix return of unitialized variable ret
  media: imx274: fix missing return assignment from call to imx274_mode_regs
  media: camss-vfe: always initialize reg at vfe_set_xbar_cfg()
  media: atomisp: make function calls cleaner
  media: atomisp: get rid of storage_class.h
  media: atomisp: get rid of wrong stddef.h include
  ...

License cleanup: add SPDX license identifier to uapi header files with a license

2017-11-02T10:20:11+00:00

Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be.  This makes it hard for
compliance tools to determine the correct license.

Update these files with an SPDX license identifier.  The identifier was
chosen based on the license information in the file.

GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.

Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier.  The format
is:
        ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)

SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text.  The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

media: cec: add CEC_EVENT_PIN_HPD_LOW/HIGH events

2017-09-23T11:43:04+00:00

Add support for two new low-level events: PIN_HPD_LOW and PIN_HPD_HIGH.

This is specifically meant for use with the upcoming cec-gpio driver
and makes it possible to trace when the HPD pin changes. Some HDMI
sinks do strange things with the HPD and this makes it easy to debug
this.

Note that this also moves the initialization of a devnode mutex and
list to the allocate_adapter function: if the HPD is high, then as
soon as the HPD interrupt is created an interrupt occurs and
cec_queue_pin_hpd_event() is called which requires that the devnode
mutex and list are initialized.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab