linux-toradex.git/include/uapi/linux/if_ether.h, branch v4.10-rc5

ethernet: use net core MTU range checking in more drivers

2016-10-20T18:51:08+00:00

Somehow, I missed a healthy number of ethernet drivers in the last pass.
Most of these drivers either were in need of an updated max_mtu to make
jumbo frames possible to enable again. In a few cases, also setting a
different min_mtu to match previous lower bounds. There are also a few
drivers that had no upper bounds checking, so they're getting a brand new
ETH_MAX_MTU that is identical to IP_MAX_MTU, but accessible by includes
all ethernet and ethernet-like drivers all have already.

acenic:
- min_mtu = 0, max_mtu = 9000

amazon/ena:
- min_mtu = 128, max_mtu = adapter->max_mtu

amd/xgbe:
- min_mtu = 0, max_mtu = 9000

sb1250:
- min_mtu = 0, max_mtu = 1518

cxgb3:
- min_mtu = 81, max_mtu = 65535

cxgb4:
- min_mtu = 81, max_mtu = 9600

cxgb4vf:
- min_mtu = 81, max_mtu = 65535

benet:
- min_mtu = 256, max_mtu = 9000

ibmveth:
- min_mtu = 68, max_mtu = 65535

ibmvnic:
- min_mtu = adapter->min_mtu, max_mtu = adapter->max_mtu
- remove now redundant ibmvnic_change_mtu

jme:
- min_mtu = 1280, max_mtu = 9202

mv643xx_eth:
- min_mtu = 64, max_mtu = 9500

mlxsw:
- min_mtu = 0, max_mtu = 65535
- Basically bypassing the core checks, and instead relying on dynamic
  checks in the respective switch drivers' ndo_change_mtu functions

ns83820:
- min_mtu = 0
- remove redundant ns83820_change_mtu, only checked for mtu > 1500

netxen:
- min_mtu = 0, max_mtu = 8000 (P2), max_mtu = 9600 (P3)

qlge:
- min_mtu = 1500, max_mtu = 9000
- driver only supports setting mtu to 1500 or 9000, so the core check only
  rules out < 1500 and > 9000, qlge_change_mtu still needs to check that
  the value is 1500 or 9000

qualcomm/emac:
- min_mtu = 46, max_mtu = 9194

xilinx_axienet:
- min_mtu = 64, max_mtu = 9000

Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking")
CC: netdev@vger.kernel.org
CC: Jes Sorensen 
CC: Netanel Belgazal 
CC: Tom Lendacky 
CC: Santosh Raspatur 
CC: Hariprasad S 
CC: Sathya Perla 
CC: Ajit Khaparde 
CC: Sriharsha Basavapatna 
CC: Somnath Kotur 
CC: Thomas Falcon 
CC: John Allen 
CC: Guo-Fu Tseng 
CC: Sebastian Hesselbarth 
CC: Jiri Pirko 
CC: Ido Schimmel 
CC: Manish Chopra 
CC: Sony Chacko 
CC: Rajesh Borundia 
CC: Timur Tabi 
CC: Anirudha Sarangi 
CC: John Linn 
Signed-off-by: Jarod Wilson 
Signed-off-by: David S. Miller

net: deprecate eth_change_mtu, remove usage

2016-10-13T13:36:57+00:00

With centralized MTU checking, there's nothing productive done by
eth_change_mtu that isn't already done in dev_set_mtu, so mark it as
deprecated and remove all usage of it in the kernel. All callers have been
audited for calls to alloc_etherdev* or ether_setup directly, which means
they all have a valid dev->min_mtu and dev->max_mtu. Now eth_change_mtu
prints out a netdev_warn about being deprecated, for the benefit of
out-of-tree drivers that might be utilizing it.

Of note, dvb_net.c actually had dev->mtu = 4096, while using
eth_change_mtu, meaning that if you ever tried changing it's mtu, you
couldn't set it above 1500 anymore. It's now getting dev->max_mtu also set
to 4096 to remedy that.

v2: fix up lantiq_etop, missed breakage due to drive not compiling on x86

CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson 
Signed-off-by: David S. Miller

net/ncsi: NCSI command packet handler

2016-07-20T03:49:16+00:00

The NCSI command packets are sent from MC (Management Controller)
to remote end. They are used for multiple purposes: probe existing
NCSI package/channel, retrieve NCSI channel's capability, configure
NCSI channel etc.

This defines struct to represent NCSI command packets and introduces
function ncsi_xmit_cmd(), which will be used to transmit NCSI command
packet according to the request. The request is represented by struct
ncsi_cmd_arg.

Signed-off-by: Gavin Shan 
Acked-by: Joel Stanley 
Signed-off-by: David S. Miller

net/hsr: Added support for HSR v1

2016-04-15T21:06:48+00:00

This patch adds support for the newer version 1 of the HSR
networking standard. Version 0 is still default and the new
version has to be selected via iproute2.

Main changes are in the supervision frame handling and its
ethertype field.

Signed-off-by: Peter Heise 
Signed-off-by: David S. Miller

uapi: add MACsec bits

2016-03-14T02:40:24+00:00

Signed-off-by: Sabrina Dubroca 
Reviewed-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller

ether: add IEEE 1722 ethertype - TSN

2015-09-10T05:06:29+00:00

IEEE 1722 describes AVB (later renamed to TSN - Time Sensitive
Networking), a protocol, encapsualtion and synchronization to utilize
standard networks for audio/video (and later other time-sensitive)
streams.

This standard uses ethertype 0x22F0.

http://standards.ieee.org/develop/regauth/ethertype/eth.txt

This is a respin of a previous patch ("ether: add AVB frame type
ETH_P_AVB")

CC: "David S. Miller" 
CC: netdev@vger.kernel.org
CC: linux-api@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Henrik Austad 
Signed-off-by: David S. Miller

net: dsa: reduce number of protocol hooks

2014-08-28T05:59:39+00:00

DSA is currently registering one packet_type function per EtherType it
needs to intercept in the receive path of a DSA-enabled Ethernet device.
Right now we have three of them: trailer, DSA and eDSA, and there might
be more in the future, this will not scale to the addition of new
protocols.

This patch proceeds with adding a new layer of abstraction and two new
functions:

dsa_switch_rcv() which will dispatch into the tag-protocol specific
receive function implemented by net/dsa/tag_*.c

dsa_slave_xmit() which will dispatch into the tag-protocol specific
transmit function implemented by net/dsa/tag_*.c

When we do create the per-port slave network devices, we iterate over
the switch protocol to assign the DSA-specific receive and transmit
operations.

A new fake ethertype value is used: ETH_P_XDSA to illustrate the fact
that this is no longer going to look like ETH_P_DSA or ETH_P_TRAILER
like it used to be.

This allows us to greatly simplify the check in eth_type_trans() and
always override the skb->protocol with ETH_P_XDSA for Ethernet switches
tagged protocol, while also reducing the number repetitive slave
netdevice_ops assignments.

Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller

ether: add loopback type ETH_P_LOOPBACK

2014-03-15T02:20:57+00:00

Per IEEE 802.3*, the correct packet type for loopback 0x9000. There's
already one ETH_P_LOOP 0x0060, which has been there for ages, however it's
plainly wrong as anything that small is considered a length field.

We can't remove it because legacy, so add a new type which corresponds to
the correct id.

http://www.iana.org/assignments/ieee-802-numbers/ieee-802-numbers.xhtml

CC: "David S. Miller" 
CC: Stefan Richter 
CC: Simon Wunderlich 
CC: Neil Jerram 
CC: Simon Horman 
CC: Arvid Brodin 
Signed-off-by: Veaceslav Falico 
Signed-off-by: David S. Miller

if_ether.h: add IEEE 802.21 Ethertype

2014-03-04T18:51:06+00:00

Add the Ethertype for IEEE Std 802.21 - Media Independent Handover
Protocol. This Ethertype is used for network control messages.

Signed-off-by: Simon Wunderlich 
Signed-off-by: Mathias Kretschmer 
Signed-off-by: David S. Miller

net: order MPLS ethertypes numerically

2014-02-26T20:14:26+00:00

All ethertypes other than ETH_P_MPLS_UC, ETH_P_MPLS_MC and
ETH_P_ATMMPOA were already ordered numerically.  This commit moves
those three ETH_P_... values into correct numerical order too.

Signed-off-by: Neil Jerram 
Signed-off-by: David S. Miller