<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/include/uapi/linux/in.h, branch v5.10-rc3</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>net: Fix some comments</title>
<updated>2020-08-27T14:55:59+00:00</updated>
<author>
<name>Miaohe Lin</name>
<email>linmiaohe@huawei.com</email>
</author>
<published>2020-08-27T11:27:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=645f08975f49441b3e753d8dc5b740cbcb226594'/>
<id>645f08975f49441b3e753d8dc5b740cbcb226594</id>
<content type='text'>
Fix some comments, including wrong function name, duplicated word and so
on.

Signed-off-by: Miaohe Lin &lt;linmiaohe@huawei.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Fix some comments, including wrong function name, duplicated word and so
on.

Signed-off-by: Miaohe Lin &lt;linmiaohe@huawei.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>icmp: support rfc 4884</title>
<updated>2020-07-20T02:20:22+00:00</updated>
<author>
<name>Willem de Bruijn</name>
<email>willemb@google.com</email>
</author>
<published>2020-07-10T13:29:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=eba75c587e811d3249c8bd50d22bb2266ccd3c0f'/>
<id>eba75c587e811d3249c8bd50d22bb2266ccd3c0f</id>
<content type='text'>
Add setsockopt SOL_IP/IP_RECVERR_4884 to return the offset to an
extension struct if present.

ICMP messages may include an extension structure after the original
datagram. RFC 4884 standardized this behavior. It stores the offset
in words to the extension header in u8 icmphdr.un.reserved[1].

The field is valid only for ICMP types destination unreachable, time
exceeded and parameter problem, if length is at least 128 bytes and
entire packet does not exceed 576 bytes.

Return the offset to the start of the extension struct when reading an
ICMP error from the error queue, if it matches the above constraints.

Do not return the raw u8 field. Return the offset from the start of
the user buffer, in bytes. The kernel does not return the network and
transport headers, so subtract those.

Also validate the headers. Return the offset regardless of validation,
as an invalid extension must still not be misinterpreted as part of
the original datagram. Note that !invalid does not imply valid. If
the extension version does not match, no validation can take place,
for instance.

For backward compatibility, make this optional, set by setsockopt
SOL_IP/IP_RECVERR_RFC4884. For API example and feature test, see
github.com/wdebruij/kerneltools/blob/master/tests/recv_icmp_v2.c

For forward compatibility, reserve only setsockopt value 1, leaving
other bits for additional icmp extensions.

Changes
  v1-&gt;v2:
  - convert word offset to byte offset from start of user buffer
    - return in ee_data as u8 may be insufficient
  - define extension struct and object header structs
  - return len only if constraints met
  - if returning len, also validate

Signed-off-by: Willem de Bruijn &lt;willemb@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add setsockopt SOL_IP/IP_RECVERR_4884 to return the offset to an
extension struct if present.

ICMP messages may include an extension structure after the original
datagram. RFC 4884 standardized this behavior. It stores the offset
in words to the extension header in u8 icmphdr.un.reserved[1].

The field is valid only for ICMP types destination unreachable, time
exceeded and parameter problem, if length is at least 128 bytes and
entire packet does not exceed 576 bytes.

Return the offset to the start of the extension struct when reading an
ICMP error from the error queue, if it matches the above constraints.

Do not return the raw u8 field. Return the offset from the start of
the user buffer, in bytes. The kernel does not return the network and
transport headers, so subtract those.

Also validate the headers. Return the offset regardless of validation,
as an invalid extension must still not be misinterpreted as part of
the original datagram. Note that !invalid does not imply valid. If
the extension version does not match, no validation can take place,
for instance.

For backward compatibility, make this optional, set by setsockopt
SOL_IP/IP_RECVERR_RFC4884. For API example and feature test, see
github.com/wdebruij/kerneltools/blob/master/tests/recv_icmp_v2.c

For forward compatibility, reserve only setsockopt value 1, leaving
other bits for additional icmp extensions.

Changes
  v1-&gt;v2:
  - convert word offset to byte offset from start of user buffer
    - return in ee_data as u8 may be insufficient
  - define extension struct and object header structs
  - return len only if constraints met
  - if returning len, also validate

Signed-off-by: Willem de Bruijn &lt;willemb@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number</title>
<updated>2020-03-12T06:49:30+00:00</updated>
<author>
<name>Paolo Lungaroni</name>
<email>paolo.lungaroni@cnit.it</email>
</author>
<published>2020-03-11T16:54:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=2677625387056136e256c743e3285b4fe3da87bb'/>
<id>2677625387056136e256c743e3285b4fe3da87bb</id>
<content type='text'>
The Internet Assigned Numbers Authority (IANA) has recently assigned
a protocol number value of 143 for Ethernet [1].

Before this assignment, encapsulation mechanisms such as Segment Routing
used the IPv6-NoNxt protocol number (59) to indicate that the encapsulated
payload is an Ethernet frame.

In this patch, we add the definition of the Ethernet protocol number to the
kernel headers and update the SRv6 L2 tunnels to use it.

[1] https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml

Signed-off-by: Paolo Lungaroni &lt;paolo.lungaroni@cnit.it&gt;
Reviewed-by: Andrea Mayer &lt;andrea.mayer@uniroma2.it&gt;
Acked-by: Ahmed Abdelsalam &lt;ahmed.abdelsalam@gssi.it&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The Internet Assigned Numbers Authority (IANA) has recently assigned
a protocol number value of 143 for Ethernet [1].

Before this assignment, encapsulation mechanisms such as Segment Routing
used the IPv6-NoNxt protocol number (59) to indicate that the encapsulated
payload is an Ethernet frame.

In this patch, we add the definition of the Ethernet protocol number to the
kernel headers and update the SRv6 L2 tunnels to use it.

[1] https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml

Signed-off-by: Paolo Lungaroni &lt;paolo.lungaroni@cnit.it&gt;
Reviewed-by: Andrea Mayer &lt;andrea.mayer@uniroma2.it&gt;
Acked-by: Ahmed Abdelsalam &lt;ahmed.abdelsalam@gssi.it&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tcp: Define IPPROTO_MPTCP</title>
<updated>2020-01-10T02:41:41+00:00</updated>
<author>
<name>Mat Martineau</name>
<email>mathew.j.martineau@linux.intel.com</email>
</author>
<published>2020-01-09T15:59:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=faf391c3826cd29feae02078ca2022d2f912f7cc'/>
<id>faf391c3826cd29feae02078ca2022d2f912f7cc</id>
<content type='text'>
To open a MPTCP socket with socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP),
IPPROTO_MPTCP needs a value that differs from IPPROTO_TCP. The existing
IPPROTO numbers mostly map directly to IANA-specified protocol numbers.
MPTCP does not have a protocol number allocated because MPTCP packets
use the TCP protocol number. Use private number not used OTA.

Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: Mat Martineau &lt;mathew.j.martineau@linux.intel.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
To open a MPTCP socket with socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP),
IPPROTO_MPTCP needs a value that differs from IPPROTO_TCP. The existing
IPPROTO numbers mostly map directly to IANA-specified protocol numbers.
MPTCP does not have a protocol number allocated because MPTCP packets
use the TCP protocol number. Use private number not used OTA.

Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: Mat Martineau &lt;mathew.j.martineau@linux.intel.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bridge: join all-snoopers multicast address</title>
<updated>2019-01-23T01:18:08+00:00</updated>
<author>
<name>Linus Lüssing</name>
<email>linus.luessing@c0d3.blue</email>
</author>
<published>2019-01-21T06:26:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=4effd28c1245303dce7fd290c501ac2c11052114'/>
<id>4effd28c1245303dce7fd290c501ac2c11052114</id>
<content type='text'>
Next to snooping IGMP/MLD queries RFC4541, section 2.1.1.a) recommends
to snoop multicast router advertisements to detect multicast routers.

Multicast router advertisements are sent to an "all-snoopers"
multicast address. To be able to receive them reliably, we need to
join this group.

Otherwise other snooping switches might refrain from forwarding these
advertisements to us.

Signed-off-by: Linus Lüssing &lt;linus.luessing@c0d3.blue&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Next to snooping IGMP/MLD queries RFC4541, section 2.1.1.a) recommends
to snoop multicast router advertisements to detect multicast routers.

Multicast router advertisements are sent to an "all-snoopers"
multicast address. To be able to receive them reliably, we need to
join this group.

Otherwise other snooping switches might refrain from forwarding these
advertisements to us.

Signed-off-by: Linus Lüssing &lt;linus.luessing@c0d3.blue&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>IN_BADCLASS: fix macro to actually work</title>
<updated>2019-01-16T05:45:21+00:00</updated>
<author>
<name>Greg Kroah-Hartman</name>
<email>gregkh@linuxfoundation.org</email>
</author>
<published>2019-01-10T20:24:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=f275ee0fa3a06eb87edc229749cf1eb18f0663fa'/>
<id>f275ee0fa3a06eb87edc229749cf1eb18f0663fa</id>
<content type='text'>
Commit 65cab850f0ee ("net: Allow class-e address assignment via ifconfig
ioctl") modified the IN_BADCLASS macro a bit, but unfortunatly one too
many '(' characters were added to the line, making any code that used
it, not build properly.

Also, the macro now compares an unsigned with a signed value, which
isn't ok, so fix that up by making both types match properly.

Reported-by: Christopher Ferris &lt;cferris@google.com&gt;
Fixes: 65cab850f0ee ("net: Allow class-e address assignment via ifconfig ioctl")
Cc: Dave Taht &lt;dave.taht@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit 65cab850f0ee ("net: Allow class-e address assignment via ifconfig
ioctl") modified the IN_BADCLASS macro a bit, but unfortunatly one too
many '(' characters were added to the line, making any code that used
it, not build properly.

Also, the macro now compares an unsigned with a signed value, which
isn't ok, so fix that up by making both types match properly.

Reported-by: Christopher Ferris &lt;cferris@google.com&gt;
Fixes: 65cab850f0ee ("net: Allow class-e address assignment via ifconfig ioctl")
Cc: Dave Taht &lt;dave.taht@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: Allow class-e address assignment via ifconfig ioctl</title>
<updated>2018-12-14T23:39:31+00:00</updated>
<author>
<name>Dave Taht</name>
<email>dave.taht@gmail.com</email>
</author>
<published>2018-12-11T23:30:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=65cab850f0eeaa9180bd2e10a231964f33743edf'/>
<id>65cab850f0eeaa9180bd2e10a231964f33743edf</id>
<content type='text'>
While most distributions long ago switched to the iproute2 suite
of utilities, which allow class-e (240.0.0.0/4) address assignment,
distributions relying on busybox, toybox and other forms of
ifconfig cannot assign class-e addresses without this kernel patch.

While CIDR has been obsolete for 2 decades, and a survey of all the
open source code in the world shows the IN_whatever macros are also
obsolete... rather than obsolete CIDR from this ioctl entirely, this
patch merely enables class-e assignment, sanely.

Signed-off-by: Dave Taht &lt;dave.taht@gmail.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
While most distributions long ago switched to the iproute2 suite
of utilities, which allow class-e (240.0.0.0/4) address assignment,
distributions relying on busybox, toybox and other forms of
ifconfig cannot assign class-e addresses without this kernel patch.

While CIDR has been obsolete for 2 decades, and a survey of all the
open source code in the world shows the IN_whatever macros are also
obsolete... rather than obsolete CIDR from this ioctl entirely, this
patch merely enables class-e assignment, sanely.

Signed-off-by: Dave Taht &lt;dave.taht@gmail.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>License cleanup: add SPDX license identifier to uapi header files with a license</title>
<updated>2017-11-02T10:20:11+00:00</updated>
<author>
<name>Greg Kroah-Hartman</name>
<email>gregkh@linuxfoundation.org</email>
</author>
<published>2017-11-01T14:09:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=e2be04c7f9958dde770eeb8b30e829ca969b37bb'/>
<id>e2be04c7f9958dde770eeb8b30e829ca969b37bb</id>
<content type='text'>
Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be.  This makes it hard for
compliance tools to determine the correct license.

Update these files with an SPDX license identifier.  The identifier was
chosen based on the license information in the file.

GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.

Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier.  The format
is:
        ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)

SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text.  The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart &lt;kstewart@linuxfoundation.org&gt;
Reviewed-by: Philippe Ombredanne &lt;pombredanne@nexb.com&gt;
Reviewed-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be.  This makes it hard for
compliance tools to determine the correct license.

Update these files with an SPDX license identifier.  The identifier was
chosen based on the license information in the file.

GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.

Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier.  The format
is:
        ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)

SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text.  The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart &lt;kstewart@linuxfoundation.org&gt;
Reviewed-by: Philippe Ombredanne &lt;pombredanne@nexb.com&gt;
Reviewed-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipv4: add IP_RECVFRAGSIZE cmsg</title>
<updated>2016-11-03T19:41:11+00:00</updated>
<author>
<name>Willem de Bruijn</name>
<email>willemb@google.com</email>
</author>
<published>2016-11-02T15:02:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=70ecc24841326396a827deb55c3fefac582a729d'/>
<id>70ecc24841326396a827deb55c3fefac582a729d</id>
<content type='text'>
The IP stack records the largest fragment of a reassembled packet
in IPCB(skb)-&gt;frag_max_size. When reading a datagram or raw packet
that arrived fragmented, expose the value to allow applications to
estimate receive path MTU.

Tested:
  Sent data over a veth pair of which the source has a small mtu.
  Sent data using netcat, received using a dedicated process.

  Verified that the cmsg IP_RECVFRAGSIZE is returned only when
  data arrives fragmented, and in that cases matches the veth mtu.

    ip link add veth0 type veth peer name veth1

    ip netns add from
    ip netns add to

    ip link set dev veth1 netns to
    ip netns exec to ip addr add dev veth1 192.168.10.1/24
    ip netns exec to ip link set dev veth1 up

    ip link set dev veth0 netns from
    ip netns exec from ip addr add dev veth0 192.168.10.2/24
    ip netns exec from ip link set dev veth0 up
    ip netns exec from ip link set dev veth0 mtu 1300
    ip netns exec from ethtool -K veth0 ufo off

    dd if=/dev/zero bs=1 count=1400 2&gt;/dev/null &gt; payload

    ip netns exec to ./recv_cmsg_recvfragsize -4 -u -p 6000 &amp;
    ip netns exec from nc -q 1 -u 192.168.10.1 6000 &lt; payload

  using github.com/wdebruij/kerneltools/blob/master/tests/recvfragsize.c

Signed-off-by: Willem de Bruijn &lt;willemb@google.com&gt;
Acked-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The IP stack records the largest fragment of a reassembled packet
in IPCB(skb)-&gt;frag_max_size. When reading a datagram or raw packet
that arrived fragmented, expose the value to allow applications to
estimate receive path MTU.

Tested:
  Sent data over a veth pair of which the source has a small mtu.
  Sent data using netcat, received using a dedicated process.

  Verified that the cmsg IP_RECVFRAGSIZE is returned only when
  data arrives fragmented, and in that cases matches the veth mtu.

    ip link add veth0 type veth peer name veth1

    ip netns add from
    ip netns add to

    ip link set dev veth1 netns to
    ip netns exec to ip addr add dev veth1 192.168.10.1/24
    ip netns exec to ip link set dev veth1 up

    ip link set dev veth0 netns from
    ip netns exec from ip addr add dev veth0 192.168.10.2/24
    ip netns exec from ip link set dev veth0 up
    ip netns exec from ip link set dev veth0 mtu 1300
    ip netns exec from ethtool -K veth0 ufo off

    dd if=/dev/zero bs=1 count=1400 2&gt;/dev/null &gt; payload

    ip netns exec to ./recv_cmsg_recvfragsize -4 -u -p 6000 &amp;
    ip netns exec from nc -q 1 -u 192.168.10.1 6000 &lt; payload

  using github.com/wdebruij/kerneltools/blob/master/tests/recvfragsize.c

Signed-off-by: Willem de Bruijn &lt;willemb@google.com&gt;
Acked-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>api: fix compatibility of linux/in.h with netinet/in.h</title>
<updated>2015-06-30T01:56:21+00:00</updated>
<author>
<name>Stephen Hemminger</name>
<email>stephen@networkplumber.org</email>
</author>
<published>2015-06-30T00:57:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=279c6c7fa64f5763e6b9f05e7ab3840092e702e7'/>
<id>279c6c7fa64f5763e6b9f05e7ab3840092e702e7</id>
<content type='text'>
u
This fixes breakage to iproute2 build with recent kernel headers
caused by:
   commit a263653ed798216c0069922d7b5237ca49436007
   Author: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
   Date:   Wed Jun 17 10:28:27 2015 -0500

   netfilter: don't pull include/linux/netfilter.h from netns headers

The issue is that definitions in linux/in.h overlap with those
in netinet/in.h. This patch solves this by introducing the same
mechanism as was used to solve the same problem with linux/in6.h

Signed-off-by: Stephen Hemminger &lt;stephen@networkplumber.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
u
This fixes breakage to iproute2 build with recent kernel headers
caused by:
   commit a263653ed798216c0069922d7b5237ca49436007
   Author: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
   Date:   Wed Jun 17 10:28:27 2015 -0500

   netfilter: don't pull include/linux/netfilter.h from netns headers

The issue is that definitions in linux/in.h overlap with those
in netinet/in.h. This patch solves this by introducing the same
mechanism as was used to solve the same problem with linux/in6.h

Signed-off-by: Stephen Hemminger &lt;stephen@networkplumber.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
</feed>
