linux-toradex.git/include/uapi/linux/in6.h, branch v6.4-rc1

ipv6: ioam: Data plane support for Pre-allocated Trace

2021-07-21T15:14:33+00:00

Implement support for processing the IOAM Pre-allocated Trace with IPv6,
see [1] and [2]. Introduce a new IPv6 Hop-by-Hop TLV option, see IANA [3].

A new per-interface sysctl is introduced. The value is a boolean to accept (=1)
or ignore (=0, by default) IPv6 IOAM options on ingress for an interface:
 - net.ipv6.conf.XXX.ioam6_enabled

Two other sysctls are introduced to define IOAM IDs, represented by an integer.
They are respectively per-namespace and per-interface:
 - net.ipv6.ioam6_id
 - net.ipv6.conf.XXX.ioam6_id

The value of the first one represents the IOAM ID of the node itself (u32; max
and default value = U32_MAX>>8, due to hop limit concatenation) while the other
represents the IOAM ID of an interface (u16; max and default value = U16_MAX).

Each "ioam6_id" sysctl has a "_wide" equivalent:
 - net.ipv6.ioam6_id_wide
 - net.ipv6.conf.XXX.ioam6_id_wide

The value of the first one represents the wide IOAM ID of the node itself (u64;
max and default value = U64_MAX>>8, due to hop limit concatenation) while the
other represents the wide IOAM ID of an interface (u32; max and default value
= U32_MAX).

The use of short and wide equivalents is not exclusive, a deployment could
choose to leverage both. For example, net.ipv6.conf.XXX.ioam6_id (short format)
could be an identifier for a physical interface, whereas
net.ipv6.conf.XXX.ioam6_id_wide (wide format) could be an identifier for a
logical sub-interface. Documentation about new sysctls is provided at the end
of this patchset.

Two relativistic hash tables are used: one for IOAM namespaces, the other for
IOAM schemas. A namespace can only have a single active schema and a schema
can only be attached to a single namespace (1:1 relationship).

  [1] https://tools.ietf.org/html/draft-ietf-ippm-ioam-ipv6-options
  [2] https://tools.ietf.org/html/draft-ietf-ippm-ioam-data
  [3] https://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xhtml#ipv6-parameters-2

Signed-off-by: Justin Iurman 
Signed-off-by: David S. Miller

icmp6: support rfc 4884

2020-07-25T00:12:41+00:00

Extend the rfc 4884 read interface introduced for ipv4 in
commit eba75c587e81 ("icmp: support rfc 4884") to ipv6.

Add socket option SOL_IPV6/IPV6_RECVERR_RFC4884.

Changes v1->v2:
  - make ipv6_icmp_error_rfc4884 static (file scope)

Signed-off-by: Willem de Bruijn 
Signed-off-by: David S. Miller

net: ipv6: add socket option IPV6_ROUTER_ALERT_ISOLATE

2019-03-04T05:05:10+00:00

By default IPv6 socket with IPV6_ROUTER_ALERT socket option set will
receive all IPv6 RA packets from all namespaces.
IPV6_ROUTER_ALERT_ISOLATE socket option restricts packets received by
the socket to be only from the socket's namespace.

Signed-off-by: Maxim Martynov 
Signed-off-by: Francesco Ruggeri 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller

ipv6: Add sockopt IPV6_MULTICAST_ALL analogue to IP_MULTICAST_ALL

2018-09-13T15:17:27+00:00

The socket option will be enabled by default to ensure current behaviour
is not changed. This is the same for the IPv4 version.

A socket bound to in6addr_any and a specific port will receive all traffic
on that port. Analogue to IP_MULTICAST_ALL, disable this behaviour, if
one or more multicast groups were joined (using said socket) and only
pass on multicast traffic from groups, which were explicitly joined via
this socket.

Without this option disabled a socket (system even) joined to multiple
multicast groups is very hard to get right. Filtering by destination
address has to take place in user space to avoid receiving multicast
traffic from other multicast groups, which might have traffic on the same
port.

The extension of the IP_MULTICAST_ALL socketoption to just apply to ipv6,
too, is not done to avoid changing the behaviour of current applications.

Signed-off-by: Andre Naujoks 
Acked-By: YOSHIFUJI Hideaki 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-11-04T00:26:51+00:00

Files removed in 'net-next' had their license header updated
in 'net'.  We take the remove from 'net-next'.

Signed-off-by: David S. Miller

License cleanup: add SPDX license identifier to uapi header files with a license

2017-11-02T10:20:11+00:00

Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be.  This makes it hard for
compliance tools to determine the correct license.

Update these files with an SPDX license identifier.  The identifier was
chosen based on the license information in the file.

GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.

Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier.  The format
is:
        ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)

SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text.  The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

net-ipv6: add support for sockopt(SOL_IPV6, IPV6_FREEBIND)

2017-09-30T04:30:52+00:00

So far we've been relying on sockopt(SOL_IP, IP_FREEBIND) being usable
even on IPv6 sockets.

However, it turns out it is perfectly reasonable to want to set freebind
on an AF_INET6 SOCK_RAW socket - but there is no way to set any SOL_IP
socket option on such a socket (they're all blindly errored out).

One use case for this is to allow spoofing src ip on a raw socket
via sendmsg cmsg.

Tested:
  built, and booted
  # python
  >>> import socket
  >>> SOL_IP = socket.SOL_IP
  >>> SOL_IPV6 = socket.IPPROTO_IPV6
  >>> IP_FREEBIND = 15
  >>> IPV6_FREEBIND = 78
  >>> s = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM, 0)
  >>> s.getsockopt(SOL_IP, IP_FREEBIND)
  0
  >>> s.getsockopt(SOL_IPV6, IPV6_FREEBIND)
  0
  >>> s.setsockopt(SOL_IPV6, IPV6_FREEBIND, 1)
  >>> s.getsockopt(SOL_IP, IP_FREEBIND)
  1
  >>> s.getsockopt(SOL_IPV6, IPV6_FREEBIND)
  1

Signed-off-by: Maciej Żenczykowski 
Signed-off-by: David S. Miller

ipv6: add IPV6_RECVFRAGSIZE cmsg

2016-11-03T19:41:11+00:00

When reading a datagram or raw packet that arrived fragmented, expose
the maximum fragment size if recorded to allow applications to
estimate receive path MTU.

At this point, the field is only recorded when ipv6 connection
tracking is enabled. A follow-up patch will record this field also
in the ipv6 input path.

Tested using the test for IP_RECVFRAGSIZE plus

  ip netns exec to ip addr add dev veth1 fc07::1/64
  ip netns exec from ip addr add dev veth0 fc07::2/64

  ip netns exec to ./recv_cmsg_recvfragsize -6 -u -p 6000 &
  ip netns exec from nc -q 1 -u fc07::1 6000 < payload

Both with and without enabling connection tracking

  ip6tables -A INPUT -m state --state NEW -p udp -j LOG

Signed-off-by: Willem de Bruijn 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller

calipso: Set the calipso socket label to match the secattr.

2016-06-27T19:02:51+00:00

CALIPSO is a hop-by-hop IPv6 option.  A lot of this patch is based on
the equivalent CISPO code.  The main difference is due to manipulating
the options in the hop-by-hop header.

Signed-off-by: Huw Davies 
Signed-off-by: Paul Moore

ipv6: add IPV6_HDRINCL option for raw sockets

2015-12-17T20:12:28+00:00

Same as in Windows, we miss IPV6_HDRINCL for SOL_IPV6 and SOL_RAW.
The SOL_IP/IP_HDRINCL is not available for IPv6 sockets.

Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller