This adds information about storage keys to the struct returned by
the KVM_PPC_GET_SMMU_INFO ioctl.  The new fields replace a pad field,
which was zeroed by previous kernel versions.  Thus userspace that
knows about the new fields will see zeroes when running on an older
kernel, indicating that storage keys are not supported.  The size of
the structure has not changed.

The number of keys is hard-coded for the CPUs supported by HV KVM,
which is just POWER7, POWER8 and POWER9.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Hyper-V identifies vCPUs by Virtual Processor Index, which can be
queried via HV_X64_MSR_VP_INDEX msr.  It is defined by the spec as a
sequential number which can't exceed the maximum number of vCPUs per VM.
APIC ids can be sparse and thus aren't a valid replacement for VP
indices.

Current KVM uses its internal vcpu index as VP_INDEX.  However, to make
it predictable and persistent across VM migrations, the userspace has to
control the value of VP_INDEX.

This patch achieves that, by storing vp_index explicitly on vcpu, and
allowing HV_X64_MSR_VP_INDEX to be set from the host side.  For
compatibility it's initialized to KVM vcpu index.  Also a few variables
are renamed to make clear distinction betweed this Hyper-V vp_index and
KVM vcpu_id (== APIC id).  Besides, a new capability,
KVM_CAP_HYPERV_VP_INDEX, is added to allow the userspace to skip
attempting msr writes where unsupported, to avoid spamming error logs.

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

There is a flaw in the Hyper-V SynIC implementation in KVM: when message
page or event flags page is enabled by setting the corresponding msr,
KVM zeroes it out.  This is problematic because on migration the
corresponding MSRs are loaded on the destination, so the content of
those pages is lost.

This went unnoticed so far because the only user of those pages was
in-KVM hyperv synic timers, which could continue working despite that
zeroing.

Newer QEMU uses those pages for Hyper-V VMBus implementation, and
zeroing them breaks the migration.

Besides, in newer QEMU the content of those pages is fully managed by
QEMU, so zeroing them is undesirable even when writing the MSRs from the
guest side.

To support this new scheme, introduce a new capability,
KVM_CAP_HYPERV_SYNIC2, which, when enabled, makes sure that the synic
pages aren't zeroed out in KVM.

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

In case of KVM_S390_GET_CMMA_BITS, the kernel does not only read struct
kvm_s390_cmma_log passed from userspace (which constitutes _IOC_WRITE),
it also writes back a return value (which constitutes _IOC_READ) making
this an _IOWR ioctl instead of _IOW.

Fixes: 4036e387 ("KVM: s390: ioctls to get and set guest storage attributes")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

- Better machine check handling for HV KVM
- Ability to support guests with threads=2, 4 or 8 on POWER9
- Fix for a race that could cause delayed recognition of signals
- Fix for a bug where POWER9 guests could sleep with interrupts
  pending.

* Add the struct used in the ioctls to get and set CMMA attributes.
* Add the two functions needed to get and set the CMMA attributes for
  guest pages.
* Add the two ioctls that use the aforementioned functions.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

Now that userspace can set the virtual SMT mode by enabling the
KVM_CAP_PPC_SMT capability, it is useful for userspace to be able
to query the set of possible virtual SMT modes.  This provides a
new capability, KVM_CAP_PPC_SMT_POSSIBLE, to provide this
information.  The return value is a bitmap of possible modes, with
bit N set if virtual SMT mode 2^N is available.  That is, 1 indicates
SMT1 is available, 2 indicates that SMT2 is available, 3 indicates
that both SMT1 and SMT2 are available, and so on.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

This introduces a new KVM capability to control how KVM behaves
on machine check exception (MCE) in HV KVM guests.

If this capability has not been enabled, KVM redirects machine check
exceptions to guest's 0x200 vector, if the address in error belongs to
the guest. With this capability enabled, KVM will cause a guest exit
with the exit reason indicating an NMI.

The new capability is required to avoid problems if a new kernel/KVM
is used with an old QEMU, running a guest that doesn't issue
"ibm,nmi-register".  As old QEMU does not understand the NMI exit
type, it treats it as a fatal error.  However, the guest could have
handled the machine check error if the exception was delivered to
guest's 0x200 interrupt vector instead of NMI exit in case of old
QEMU.

[paulus@ozlabs.org - Reworded the commit message to be clearer,
 enable only on HV KVM.]

Signed-off-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

KVM/ARM Changes for v4.12.

Changes include:
 - Using the common sysreg definitions between KVM and arm64
 - Improved hyp-stub implementation with support for kexec and kdump on the 32-bit side
 - Proper PMU exception handling
 - Performance improvements of our GIC handling
 - Support for irqchip in userspace with in-kernel arch-timers and PMU support
 - A fix for a race condition in our PSCI code

Conflicts:
	Documentation/virtual/kvm/api.txt
	include/uapi/linux/kvm.h

Guests that are heavy on futexes end up IPI'ing each other a lot. That
can lead to significant slowdowns and latency increase for those guests
when running within KVM.

If only a single guest is needed on a host, we have a lot of spare host
CPU time we can throw at the problem. Modern CPUs implement a feature
called "MWAIT" which allows guests to wake up sleeping remote CPUs without
an IPI - thus without an exit - at the expense of never going out of guest
context.

The decision whether this is something sensible to use should be up to the
VM admin, so to user space. We can however allow MWAIT execution on systems
that support it properly hardware wise.

This patch adds a CAP to user space and a KVM cpuid leaf to indicate
availability of native MWAIT execution. With that enabled, the worst a
guest can do is waste as many cycles as a "jmp ." would do, so it's not
a privilege problem.

We consciously do *not* expose the feature in our CPUID bitmap, as most
people will want to benefit from sleeping vCPUs to allow for over commit.

Reported-by: "Gabriel L. Somlo" <gsomlo@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[agraf: fix amd, change commit message]
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>