KVM/arm64 changes for 6.17, round #1 - Host driver for GICv5, the next generation interrupt controller for arm64, including support for interrupt routing, MSIs, interrupt translation and wired interrupts. - Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on GICv5 hardware, leveraging the legacy VGIC interface. - Userspace control of the 'nASSGIcap' GICv3 feature, allowing userspace to disable support for SGIs w/o an active state on hardware that previously advertised it unconditionally. - Map supporting endpoints with cacheable memory attributes on systems with FEAT_S2FWB and DIC where KVM no longer needs to perform cache maintenance on the address range. - Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest hypervisor to inject external aborts into an L2 VM and take traps of masked external aborts to the hypervisor. - Convert more system register sanitization to the config-driven implementation. - Fixes to the visibility of EL2 registers, namely making VGICv3 system registers accessible through the VGIC device instead of the ONE_REG vCPU ioctls. - Various cleanups and minor fixes.
Allow a guest to read the physical IA32_APERF and IA32_MPERF MSRs without interception. The IA32_APERF and IA32_MPERF MSRs are not virtualized. Writes are not handled at all. The MSR values are not zeroed on vCPU creation, saved on suspend, or restored on resume. No accommodation is made for processor migration or for sharing a logical processor with other tasks. No adjustments are made for non-unit TSC multipliers. The MSRs do not account for time the same way as the comparable PMU events, whether the PMU is virtualized by the traditional emulation method or the new mediated pass-through approach. Nonetheless, in a properly constrained environment, this capability can be combined with a guest CPUID table that advertises support for CPUID.6:ECX.APERFMPERF[bit 0] to induce a Linux guest to report the effective physical CPU frequency in /proc/cpuinfo. Moreover, there is no performance cost for this capability. Signed-off-by: Jim Mattson <jmattson@google.com> Link: https://lore.kernel.org/r/20250530185239.2335185-3-jmattson@google.com Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Link: https://lore.kernel.org/r/20250626001225.744268-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
Introduce a new KVM capability to expose to the userspace whether cacheable mapping of PFNMAP is supported. The ability to safely do the cacheable mapping of PFNMAP is contingent on S2FWB and ARM64_HAS_CACHE_DIC. S2FWB allows KVM to avoid flushing the D cache, ARM64_HAS_CACHE_DIC allows KVM to avoid flushing the icache and turns icache_inval_pou() into a NOP. The cap would be false if those requirements are missing and is checked by making use of kvm_arch_supports_cacheable_pfnmap. This capability would allow userspace to discover the support. It could for instance be used by userspace to prevent live-migration across FWB and non-FWB hosts. CC: Catalin Marinas <catalin.marinas@arm.com> CC: Jason Gunthorpe <jgg@nvidia.com> CC: Oliver Upton <oliver.upton@linux.dev> CC: David Hildenbrand <david@redhat.com> Suggested-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Donald Dutile <ddutile@redhat.com> Signed-off-by: Ankit Agrawal <ankita@nvidia.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250705071717.5062-7-ankita@nvidia.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Exit to userspace for TDG.VP.VMCALL<GetTdVmCallInfo> via KVM_EXIT_TDX, to allow userspace to provide information about the support of TDVMCALLs when r12 is 1 for the TDVMCALLs beyond the GHCI base API. GHCI spec defines the GHCI base TDVMCALLs: <GetTdVmCallInfo>, <MapGPA>, <ReportFatalError>, <Instruction.CPUID>, <#VE.RequestMMIO>, <Instruction.HLT>, <Instruction.IO>, <Instruction.RDMSR> and <Instruction.WRMSR>. They must be supported by VMM to support TDX guests. For GetTdVmCallInfo - When leaf (r12) to enumerate TDVMCALL functionality is set to 0, successful execution indicates all GHCI base TDVMCALLs listed above are supported. Update the KVM TDX document with the set of the GHCI base APIs. - When leaf (r12) to enumerate TDVMCALL functionality is set to 1, it indicates the TDX guest is querying the supported TDVMCALLs beyond the GHCI base TDVMCALLs. Exit to userspace to let userspace set the TDVMCALL sub-function bit(s) accordingly to the leaf outputs. KVM could set the TDVMCALL bit(s) supported by itself when the TDVMCALLs don't need support from userspace after returning from userspace and before entering guest. Currently, no such TDVMCALLs implemented, KVM just sets the values returned from userspace. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com> [Adjust userspace API. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle TDVMCALL for GetQuote to generate a TD-Quote. GetQuote is a doorbell-like interface used by TDX guests to request VMM to generate a TD-Quote signed by a service hosting TD-Quoting Enclave operating on the host. A TDX guest passes a TD Report (TDREPORT_STRUCT) in a shared-memory area as parameter. Host VMM can access it and queue the operation for a service hosting TD-Quoting enclave. When completed, the Quote is returned via the same shared-memory area. KVM only checks the GPA from the TDX guest has the shared-bit set and drops the shared-bit before exiting to userspace to avoid bleeding the shared-bit into KVM's exit ABI. KVM forwards the request to userspace VMM (e.g. QEMU) and userspace VMM queues the operation asynchronously. KVM sets the return code according to the 'ret' field set by userspace to notify the TDX guest whether the request has been queued successfully or not. When the request has been queued successfully, the TDX guest can poll the status field in the shared-memory area to check whether the Quote generation is completed or not. When completed, the generated Quote is returned via the same buffer. Add KVM_EXIT_TDX as a new exit reason to userspace. Userspace is required to handle the KVM exit reason as the initial support for TDX, by reentering KVM to ensure that the TDVMCALL is complete. While at it, add a note that KVM_EXIT_HYPERCALL also requires reentry with KVM_RUN. Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com> Tested-by: Mikko Ylinen <mikko.ylinen@linux.intel.com> Acked-by: Kai Huang <kai.huang@intel.com> [Adjust userspace API. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/riscv changes for 6.16 - Add vector registers to get-reg-list selftest - VCPU reset related improvements - Remove scounteren initialization from VCPU reset - Support VCPU reset from userspace using set_mpstate() ioctl
KVM/arm64 updates for 6.16
* New features:
- Add large stage-2 mapping support for non-protected pKVM guests,
clawing back some performance.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and
protected modes.
- Enable nested virtualisation support on systems that support it
(yes, it has been a long time coming), though it is disabled by
default.
* Improvements, fixes and cleanups:
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. This ensures correctness of
emulation (the data is automatically extracted from the published
JSON files), and helps dealing with the evolution of the
architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
Add a toggleable VM capability to reset the VCPU from userspace by setting MP_STATE_INIT_RECEIVED through IOCTL. Reset through a mp_state to avoid adding a new IOCTL. Do not reset on a transition from STOPPED to RUNNABLE, because it's better to avoid side effects that would complicate userspace adoption. The MP_STATE_INIT_RECEIVED is not a permanent mp_state -- IOCTL resets the VCPU while preserving the original mp_state -- because we wouldn't gain much from having a new state it in the rest of KVM, but it's a very non-standard use of the IOCTL. Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20250515143723.2450630-5-rkrcmar@ventanamicro.com Signed-off-by: Anup Patel <anup@brainfault.org>
Since we're (almost) feature complete, let's allow userspace to request KVM_ARM_VCPU_EL2* by bumping KVM_VCPU_MAX_FEATURES up. We also now advertise the features to userspace with new capabilities. It's going to be great... Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Joey Gouly <joey.gouly@arm.com> Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com> Link: https://lore.kernel.org/r/20250514103501.2225951-17-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>