linux-toradex.git/include/uapi/linux/nl80211.h, branch v7.0-rc5

wifi: cfg80211: add initial UHR support

2026-02-02T09:11:07+00:00

Add initial support for making UHR connections (or suppressing
that), adding UHR capable stations on the AP side, encoding
and decoding UHR MCSes (except rate calculation for the new
MCSes 17, 19, 20 and 23) as well as regulatory support.

Link: https://patch.msgid.link/20260130164259.54cc12fbb307.I26126bebd83c7ab17e99827489f946ceabb3521f@changeid
Signed-off-by: Johannes Berg

Merge tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

2026-01-30T03:17:43+00:00

Johannes Berg says:

====================
Another fairly large set of changes, notably:
 - cfg80211/mac80211
    - most of EPPKE/802.1X over auth frames support
    - additional FTM capabilities
    - split up drop reasons better, removing generic RX_DROP
    - NAN cleanups/fixes
 - ath11k:
    - support for Channel Frequency Response measurement
 - ath12k:
    - support for the QCC2072 chipset
 - iwlwifi:
    - partial NAN support
    - UNII-9 support
    - some UHR/802.11bn FW APIs
    - remove most of MLO/EHT from iwlmvm
      (such devices use iwlmld)
 - rtw89:
    - preparations for RTL8922DE support

* tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (184 commits)
  wifi: iwlegacy: add missing mutex protection in il4965_store_tx_power()
  wifi: iwlegacy: add missing mutex protection in il3945_store_measurement()
  wifi: mac80211: use u64_stats_t with u64_stats_sync properly
  wifi: p54: Fix memory leak in p54_beacon_update()
  wifi: cfg80211: treat deprecated INDOOR_SP_AP_OLD control value as LPI mode
  wifi: rtw88: sdio: Migrate to use sdio specific shutdown function
  wifi: rsi: sdio: Migrate to use sdio specific shutdown function
  sdio: Provide a bustype shutdown function
  wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request
  wifi: nl80211/cfg80211: add negotiated burst period to FTM result
  wifi: nl80211/cfg80211: clarify periodic FTM parameters for non-EDCA based ranging
  wifi: nl80211/cfg80211: add new FTM capabilities
  wifi: iwlwifi: rename struct iwl_mcc_allowed_ap_type_cmd::offset_map
  wifi: iwlwifi: mvm: Remove link_id from time_events
  wifi: iwlwifi: mld: change cluster_id type to u8 array
  wifi: iwlwifi: support V13 of iwl_lari_config_change_cmd
  wifi: iwlwifi: split bios_value_u32 to separate the header
  wifi: iwlwifi: uefi: cache the DSM functions
  wifi: iwlwifi: acpi: cache the DSM functions
  wifi: iwlwifi: mvm: Cleanup MLO code
  ...
====================

Link: https://patch.msgid.link/20260129110136.176980-39-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski

wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request

2026-01-27T12:40:38+00:00

Add an option to operate as the RSTA in an FTM measurement request.
When requested, the device will dwell on the requested channel until
the peer starts the FTM negotiation. This option is only valid for
trigger-based/non trigger-based measurement with LMR feedback which
will allow the RSTA to receive the results of the measurement.

Signed-off-by: Avraham Stern 
Reviewed-by: Johannes Berg 
Signed-off-by: Miri Korenblit 
Link: https://patch.msgid.link/20260111190221.1f95fc0afab4.Iae2d32783b8e7c4a29089fec0f4c6bce94d303cc@changeid
Signed-off-by: Johannes Berg

wifi: nl80211/cfg80211: add negotiated burst period to FTM result

2026-01-27T12:40:36+00:00

The FTM result includes some of the periodic measurement negotiated
parameters (like the burst duration and number of bursts), but it
doesn't include the burst period. Add it to the FTM result
notification.

Signed-off-by: Avraham Stern 
Reviewed-by: Johannes Berg 
Signed-off-by: Miri Korenblit 
Link: https://patch.msgid.link/20260111190221.e0778f86edef.I3c98c1933eb639963bc3ffdef81a8788b59f2188@changeid
Signed-off-by: Johannes Berg

wifi: nl80211/cfg80211: clarify periodic FTM parameters for non-EDCA based ranging

2026-01-27T12:40:30+00:00

Periodic FTM request attributes are defined based on the periodic
parameters used in EDCA-based ranging negotiation. However, non-EDCA
based ranging (trigger-based/non-trigger-based) does not include
periodic parameters in the negotiation protocol, even though upper
layers may still request periodic measurements.

Clarify the semantics of periodic ranging attributes when used with
non-EDCA based ranging.

Signed-off-by: Avraham Stern 
Reviewed-by: Johannes Berg 
Signed-off-by: Miri Korenblit 
Link: https://patch.msgid.link/20260111190221.b89cb3f68e1a.I7a9d8c6d1c66c77f1b43120a841101c96c3f19ad@changeid
Signed-off-by: Johannes Berg

wifi: nl80211/cfg80211: add new FTM capabilities

2026-01-27T12:40:25+00:00

Add new capabilities to the PMSR FTM capabilities list. The new
capabilities include 6 GHz support, supported number of spatial streams
and supported number of LTF repetitions.

Signed-off-by: Avraham Stern 
Tested-by: Miriam Rachel Korenblit 
Signed-off-by: Miri Korenblit 
Link: https://patch.msgid.link/20260111190221.bf43785c18f6.Ic98cf9790ddee84bf88e5720b93c46c23af3c96c@changeid
Signed-off-by: Johannes Berg

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2026-01-23T04:14:36+00:00

Cross-merge networking fixes after downstream PR (net-6.19-rc7).

Conflicts:

drivers/net/ethernet/huawei/hinic3/hinic3_irq.c
  b35a6fd37a00 ("hinic3: Add adaptive IRQ coalescing with DIM")
  fb2bb2a1ebf7 ("hinic3: Fix netif_queue_set_napi queue_index input parameter error")
https://lore.kernel.org/fc0a7fdf08789a52653e8ad05281a0a849e79206.1768915707.git.zhuyikai1@h-partners.com

drivers/net/wireless/ath/ath12k/mac.c
drivers/net/wireless/ath/ath12k/wifi7/hw.c
  31707572108d ("wifi: ath12k: Fix wrong P2P device link id issue")
  c26f294fef2a ("wifi: ath12k: Move ieee80211_ops callback to the arch specific module")
https://lore.kernel.org/20260114123751.6a208818@canb.auug.org.au

Adjacent changes:

drivers/net/wireless/ath/ath12k/mac.c
  8b8d6ee53dfd ("wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel")
  914c890d3b90 ("wifi: ath12k: Add framework for hardware specific ieee80211_ops registration")

Signed-off-by: Jakub Kicinski

wifi: cfg80211: ignore link disabled flag from userspace

2026-01-20T09:02:01+00:00

When the AP has an advertised TID to Link Mapping (TTLM) it shall
include the element in the association response. As such, when this
element is present it needs to be used for the currently dormant links.
See Draft P802.11REVmf_D1.0 section 35.3.7.2.3 ("Negotiation of TTLM")
for the details. The flag is also not usable in case userspace wants to
specify a negotiated TTLM during association.

Note that for the link reconfiguration case, mac80211 did not use the
information. Draft P802.11REVmf_D1.0 states in section 35.3.6.4 ("Link
reconfiguration to the setup links) that we "shall operate with all the
TIDs mapped to the newly added links ..."

All this means that the flag is not needed. The implementation should
parse the information from the association response.

Signed-off-by: Benjamin Berg 
Reviewed-by: Johannes Berg 
Reviewed-by: Ilan Peer 
Signed-off-by: Miri Korenblit 
Link: https://patch.msgid.link/20260118093904.754e057896a5.Ifd06f5ef839a93bfd54d0593dc932870f95f3242@changeid
Signed-off-by: Johannes Berg

wifi: nl80211: ignore cluster id after NAN started

2026-01-19T09:18:49+00:00

After NAN was started, cluster id updates from the user space should not
happen, since the device already started a cluster with the
previousely provided id.

Since NL80211_CMD_CHANGE_NAN_CONFIG requires to set the full NAN
configuration, we can't require that NL80211_NAN_CONF_CLUSTER_ID won't
be included in this command, and keeping the last confgiured value just
to be able to compare it against the new one seems a bit overkill.

Therefore, just ignore cluster id in this command and clarify the
documentation.

Signed-off-by: Miri Korenblit 
Link: https://patch.msgid.link/20260107142229.fb55e5853269.I10d18c8f69d98b28916596d6da4207c15ea4abb5@changeid
Signed-off-by: Johannes Berg

wifi: nl80211: Add support for EPP peer indication

2026-01-14T13:34:16+00:00

Introduce a new netlink attribute NL80211_ATTR_EPP_PEER
to be used with NL80211_CMD_NEW_STA and
NL80211_CMD_ADD_LINK_STA for the userspace to indicate
that a non-AP STA is an Enhanced Privacy Protection (EPP)
peer.

Co-developed-by: Rohan Dutta 
Signed-off-by: Rohan Dutta 
Signed-off-by: Sai Pratyusha Magam 
Signed-off-by: Kavita Kavita 
Link: https://patch.msgid.link/20260114111900.2196941-5-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg