Pull x86 perf event updates from Ingo Molnar:

 - Fix address filtering for Intel/PT,ARM/CoreSight

 - Enable Intel/PEBS format 5

 - Allow more fixed-function counters for x86

 - Intel/PT: Enable not recording Taken-Not-Taken packets

 - Add a few branch-types

* tag 'perf-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Fix the build on !CONFIG_PHYS_ADDR_T_64BIT
  perf: Add irq and exception return branch types
  perf/x86/intel/uncore: Make uncore_discovery clean for 64 bit addresses
  perf/x86/intel/pt: Add a capability and config bit for disabling TNTs
  perf/x86/intel/pt: Add a capability and config bit for event tracing
  perf/x86/intel: Increase max number of the fixed counters
  KVM: x86: use the KVM side max supported fixed counter
  perf/x86/intel: Enable PEBS format 5
  perf/core: Allow kernel address filter when not filtering the kernel
  perf/x86/intel/pt: Fix address filter config for 32-bit kernel
  perf/core: Fix address filter parser for multiple filters
  x86: Share definition of __is_canonical_address()
  perf/x86/intel/pt: Relax address filter validation

This expands generic branch type classification by adding two more entries
there in i.e irq and exception return. Also updates the x86 implementation
to process X86_BR_IRET and X86_BR_IRQ records as appropriate. This changes
branch types reported to user space on x86 platform but it should not be a
problem. The possible scenarios and impacts are enumerated here.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1645681014-3346-1-git-send-email-anshuman.khandual@arm.com

Due to the alignment requirements of siginfo_t, as described in
3ddb3fd8cdb0 ("signal, perf: Fix siginfo_t by avoiding u64 on 32-bit
architectures"), siginfo_t::si_perf_data is limited to an unsigned long.

However, perf_event_attr::sig_data is an u64, to avoid having to deal
with compat conversions. Due to being an u64, it may not immediately be
clear to users that sig_data is truncated on 32 bit architectures.

Add a comment to explicitly point this out, and hopefully help some
users save time by not having to deduce themselves what's happening.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220131103407.1971678-3-elver@google.com

Add new macros for mem_hops field which can be used to
represent remote-node, socket and board level details.

Currently the code had macro for HOPS_0, which corresponds
to data coming from another core but same node.
Add new macros for HOPS_1 to HOPS_3 to represent
remote-node, socket and board level data.

For ex: Encodings for mem_hops fields with L2 cache:

L2			- local L2
L2 | REMOTE | HOPS_0	- remote core, same node L2
L2 | REMOTE | HOPS_1	- remote node, same socket L2
L2 | REMOTE | HOPS_2	- remote socket, same board L2
L2 | REMOTE | HOPS_3	- remote board L2

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211206091749.87585-2-kjain@linux.ibm.com

Going forward, future generation systems can have more hierarchy
within the node/package level but currently we don't have any data source
encoding field in perf, which can be used to represent this level of data.

Add a new field called 'mem_hops' in the perf_mem_data_src structure
which can be used to represent intra-node/package or inter-node/off-package
details. This field is of size 3 bits where PERF_MEM_HOPS_{NA, 0..6} value
can be used to present different hop levels data.

Also add corresponding macros to define mem_hop field values
and shift value.

Currently we define macro for HOPS_0 which corresponds
to data coming from another core but same node.

For ex: Encodings for mem_hops fields with L2 cache:

L2			- local L2
L2 | REMOTE | HOPS_0	- remote core, same node L2

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211006140654.298352-3-kjain@linux.ibm.com

Add a comment about PERF_MEM_LVL_* namespace being depricated
to some extent in favour of added PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_}
fields.

Remove an extra line present in perf_mem__lvl_scnprintf function.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211006140654.298352-2-kjain@linux.ibm.com

PEBS-via-PT records contain a mask of applicable counters. To identify
which event belongs to which counter, a side-band event is needed. Until
now, there has been no side-band event, and consequently users were limited
to using a single event.

Add such a side-band event. Note the event is optimised to output only
when the counter index changes for an event. That works only so long as
all PEBS-via-PT events are scheduled together, which they are for a
recording session because they are in a single group.

Also no attribute bit is used to select the new event, so a new
kernel is not compatible with older perf tools.  The assumption
being that PEBS-via-PT is sufficiently esoteric that users will not
be troubled by this.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210907163903.11820-2-adrian.hunter@intel.com

Pull siginfo fix from Eric Biederman:
 "During the merge window an issue with si_perf and the siginfo ABI came
  up. The alpha and sparc siginfo structure layout had changed with the
  addition of SIGTRAP TRAP_PERF and the new field si_perf.

  The reason only alpha and sparc were affected is that they are the
  only architectures that use si_trapno.

  Looking deeper it was discovered that si_trapno is used for only a few
  select signals on alpha and sparc, and that none of the other
  _sigfault fields past si_addr are used at all. Which means technically
  no regression on alpha and sparc.

  While the alignment concerns might be dismissed the abuse of si_errno
  by SIGTRAP TRAP_PERF does have the potential to cause regressions in
  existing userspace.

  While we still have time before userspace starts using and depending
  on the new definition siginfo for SIGTRAP TRAP_PERF this set of
  changes cleans up siginfo_t.

   - The si_trapno field is demoted from magic alpha and sparc status
     and made an ordinary union member of the _sigfault member of
     siginfo_t. Without moving it of course.

   - si_perf is replaced with si_perf_data and si_perf_type ending the
     abuse of si_errno.

   - Unnecessary additions to signalfd_siginfo are removed"

* 'for-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signalfd: Remove SIL_PERF_EVENT fields from signalfd_siginfo
  signal: Deliver all of the siginfo perf data in _perf
  signal: Factor force_sig_perf out of perf_sigtrap
  signal: Implement SIL_FAULT_TRAPNO
  siginfo: Move si_trapno inside the union inside _si_fault

Don't abuse si_errno and deliver all of the perf data in _perf member
of siginfo_t.

Note: The data field in the perf data structures in a u64 to allow a
pointer to be encoded without needed to implement a 32bit and 64bit
version of the same structure.  There already exists a 32bit and 64bit
versions siginfo_t, and the 32bit version can not include a 64bit
member as it only has 32bit alignment.  So unsigned long is used in
siginfo_t instead of a u64 as unsigned long can encode a pointer on
all architectures linux supports.

v1: https://lkml.kernel.org/r/m11rarqqx2.fsf_-_@fess.ebiederm.org
v2: https://lkml.kernel.org/r/20210503203814.25487-10-ebiederm@xmission.com
v3: https://lkml.kernel.org/r/20210505141101.11519-11-ebiederm@xmission.com
Link: https://lkml.kernel.org/r/20210517195748.8880-4-ebiederm@xmission.com
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Pull kvm updates from Paolo Bonzini:
 "This is a large update by KVM standards, including AMD PSP (Platform
  Security Processor, aka "AMD Secure Technology") and ARM CoreSight
  (debug and trace) changes.

  ARM:

   - CoreSight: Add support for ETE and TRBE

   - Stage-2 isolation for the host kernel when running in protected
     mode

   - Guest SVE support when running in nVHE mode

   - Force W^X hypervisor mappings in nVHE mode

   - ITS save/restore for guests using direct injection with GICv4.1

   - nVHE panics now produce readable backtraces

   - Guest support for PTP using the ptp_kvm driver

   - Performance improvements in the S2 fault handler

  x86:

   - AMD PSP driver changes

   - Optimizations and cleanup of nested SVM code

   - AMD: Support for virtual SPEC_CTRL

   - Optimizations of the new MMU code: fast invalidation, zap under
     read lock, enable/disably dirty page logging under read lock

   - /dev/kvm API for AMD SEV live migration (guest API coming soon)

   - support SEV virtual machines sharing the same encryption context

   - support SGX in virtual machines

   - add a few more statistics

   - improved directed yield heuristics

   - Lots and lots of cleanups

  Generic:

   - Rework of MMU notifier interface, simplifying and optimizing the
     architecture-specific code

   - a handful of "Get rid of oprofile leftovers" patches

   - Some selftests improvements"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
  KVM: selftests: Speed up set_memory_region_test
  selftests: kvm: Fix the check of return value
  KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
  KVM: SVM: Skip SEV cache flush if no ASIDs have been used
  KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
  KVM: SVM: Drop redundant svm_sev_enabled() helper
  KVM: SVM: Move SEV VMCB tracking allocation to sev.c
  KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
  KVM: SVM: Unconditionally invoke sev_hardware_teardown()
  KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
  KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
  KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
  KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
  KVM: SVM: Move SEV module params/variables to sev.c
  KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
  KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
  KVM: SVM: Zero out the VMCB array used to track SEV ASID association
  x86/sev: Drop redundant and potentially misleading 'sev_enabled'
  KVM: x86: Move reverse CPUID helpers to separate header file
  KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
  ...