linux-toradex.git/include/uapi/linux/sctp.h, branch v5.9-rc6

sctp: add SCTP_PEER_ADDR_THLDS_V2 sockopt

2019-11-08T22:18:32+00:00

Section 7.2 of rfc7829: "Peer Address Thresholds (SCTP_PEER_ADDR_THLDS)
Socket Option" extends 'struct sctp_paddrthlds' with 'spt_pathcpthld'
added to allow a user to change ps_retrans per sock/asoc/transport, as
other 2 paddrthlds: pf_retrans, pathmaxrxt.

Note: to not break the user's program, here to support pf_retrans dump
and setting by adding a new sockopt SCTP_PEER_ADDR_THLDS_V2, and a new
structure sctp_paddrthlds_v2 instead of extending sctp_paddrthlds.

Also, when setting ps_retrans, the value is not allowed to be greater
than pf_retrans.

v1->v2:
  - use SCTP_PEER_ADDR_THLDS_V2 to set/get pf_retrans instead,
    as Marcelo and David Laight suggested.

Signed-off-by: Xin Long 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: add SCTP_EXPOSE_POTENTIALLY_FAILED_STATE sockopt

2019-11-08T22:18:32+00:00

This is a sockopt defined in section 7.3 of rfc7829: "Exposing
the Potentially Failed Path State", by which users can change
pf_expose per sock and asoc.

The new sockopt SCTP_EXPOSE_POTENTIALLY_FAILED_STATE is also
known as SCTP_EXPOSE_PF_STATE for short.

v2->v3:
  - return -EINVAL if params.assoc_value > SCTP_PF_EXPOSE_MAX.
  - define SCTP_EXPOSE_PF_STATE SCTP_EXPOSE_POTENTIALLY_FAILED_STATE.
v3->v4:
  - improve changelog.

Signed-off-by: Xin Long 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: add SCTP_ADDR_POTENTIALLY_FAILED notification

2019-11-08T22:18:32+00:00

SCTP Quick failover draft section 5.1, point 5 has been removed
from rfc7829. Instead, "the sender SHOULD (i) notify the Upper
Layer Protocol (ULP) about this state transition", as said in
section 3.2, point 8.

So this patch is to add SCTP_ADDR_POTENTIALLY_FAILED, defined
in section 7.1, "which is reported if the affected address
becomes PF". Also remove transport cwnd's update when moving
from PF back to ACTIVE , which is no longer in rfc7829 either.

Note that ulp_notify will be set to false if asoc->expose is
not 'enabled', according to last patch.

v2->v3:
  - define SCTP_ADDR_PF SCTP_ADDR_POTENTIALLY_FAILED.
v3->v4:
  - initialize spc_state with SCTP_ADDR_AVAILABLE, as Marcelo suggested.
  - check asoc->pf_expose in sctp_assoc_control_transport(), as Marcelo
    suggested.

Signed-off-by: Xin Long 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: add pf_expose per netns and sock and asoc

2019-11-08T22:18:32+00:00

As said in rfc7829, section 3, point 12:

  The SCTP stack SHOULD expose the PF state of its destination
  addresses to the ULP as well as provide the means to notify the
  ULP of state transitions of its destination addresses from
  active to PF, and vice versa.  However, it is recommended that
  an SCTP stack implementing SCTP-PF also allows for the ULP to be
  kept ignorant of the PF state of its destinations and the
  associated state transitions, thus allowing for retention of the
  simpler state transition model of [RFC4960] in the ULP.

Not only does it allow to expose the PF state to ULP, but also
allow to ignore sctp-pf to ULP.

So this patch is to add pf_expose per netns, sock and asoc. And in
sctp_assoc_control_transport(), ulp_notify will be set to false if
asoc->expose is not 'enabled' in next patch.

It also allows a user to change pf_expose per netns by sysctl, and
pf_expose per sock and asoc will be initialized with it.

Note that pf_expose also works for SCTP_GET_PEER_ADDR_INFO sockopt,
to not allow a user to query the state of a sctp-pf peer address
when pf_expose is 'disabled', as said in section 7.3.

v1->v2:
  - Fix a build warning noticed by Nathan Chancellor.
v2->v3:
  - set pf_expose to UNUSED by default to keep compatible with old
    applications.
v3->v4:
  - add a new entry for pf_expose on ip-sysctl.txt, as Marcelo suggested.
  - change this patch to 1/5, and move sctp_assoc_control_transport
    change into 2/5, as Marcelo suggested.
  - use SCTP_PF_EXPOSE_UNSET instead of SCTP_PF_EXPOSE_UNUSED, and
    set SCTP_PF_EXPOSE_UNSET to 0 in enum, as Marcelo suggested.

Signed-off-by: Xin Long 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller

sctp: add SCTP_SEND_FAILED_EVENT event

2019-10-10T00:06:58+00:00

This patch is to add a new event SCTP_SEND_FAILED_EVENT described in
rfc6458#section-6.1.11. It's a update of SCTP_SEND_FAILED event:

  struct sctp_sndrcvinfo ssf_info is replaced with
  struct sctp_sndinfo ssfe_info in struct sctp_send_failed_event.

SCTP_SEND_FAILED is being deprecated, but we don't remove it in this
patch. Both are being processed in sctp_datamsg_destroy() when the
corresp event flag is set.

Signed-off-by: Xin Long 
Acked-by: Neil Horman 
Signed-off-by: Jakub Kicinski

sctp: allow users to set ep ecn flag by sockopt

2019-08-28T03:54:14+00:00

SCTP_ECN_SUPPORTED sockopt will be added to allow users to change
ep ecn flag, and it's similar with other feature flags.

Signed-off-by: Xin Long 
Signed-off-by: David S. Miller

sctp: add SCTP_AUTH_SUPPORTED sockopt

2019-08-20T01:27:29+00:00

SCTP_AUTH_SUPPORTED sockopt is used to set enpoint's auth
flag. With this feature, each endpoint will have its own
flag for its future asoc's auth_capable, instead of netns
auth flag.

Note that when both ep's auth_enable is enabled, endpoint
auth related data should be initialized. If asconf_enable
is also set, SCTP_CID_ASCONF/SCTP_CID_ASCONF_ACK should
be added into auth_chunk_list.

Signed-off-by: Xin Long 
Signed-off-by: David S. Miller

sctp: add SCTP_ASCONF_SUPPORTED sockopt

2019-08-20T01:27:28+00:00

SCTP_ASCONF_SUPPORTED sockopt is used to set enpoint's asconf
flag. With this feature, each endpoint will have its own flag
for its future asoc's asconf_capable, instead of netns asconf
flag.

Note that when both ep's asconf_enable and auth_enable are
enabled, SCTP_CID_ASCONF and SCTP_CID_ASCONF_ACK should be
added into auth_chunk_list.

Signed-off-by: Xin Long 
Signed-off-by: David S. Miller

sctp: introduce SCTP_FUTURE/CURRENT/ALL_ASSOC

2019-01-30T08:44:06+00:00

This patch is to add 3 constants SCTP_FUTURE_ASSOC,
SCTP_CURRENT_ASSOC and SCTP_ALL_ASSOC for reserved
assoc_ids, as defined in rfc6458#section-7.2.

And add the process for them when doing lookup and
inserting in sctp_id2assoc and sctp_assoc_set_id.

Signed-off-by: Xin Long 
Signed-off-by: David S. Miller

sctp: add sockopt SCTP_EVENT

2018-11-19T20:25:43+00:00

This patch adds sockopt SCTP_EVENT described in rfc6525#section-6.2.
With this sockopt users can subscribe to an event from a specified
asoc.

Signed-off-by: Xin Long 
Signed-off-by: David S. Miller