Pull tty and serial driver updates from Greg KH:
 "Here's the large TTY and Serial driver update for 4.7-rc1.

  A few new serial drivers are added here, and Peter has fixed a bunch
  of long-standing bugs in the tty layer and serial drivers as normal.
  Full details in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (88 commits)
  MAINTAINERS: 8250: remove website reference
  serial: core: Fix port mutex assert if lockdep disabled
  serial: 8250_dw: fix wrong logic in dw8250_check_lcr()
  tty: vt, finish looping on duplicate
  tty: vt, return error when con_startup fails
  QE-UART: add "fsl,t1040-ucc-uart" to of_device_id
  serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
  serial: 8250dw: Add device HID for future AMD UART controller
  Fix OpenSSH pty regression on close
  serial: mctrl_gpio: add IRQ locking
  serial: 8250: Integrate Fintek into 8250_base
  serial: mps2-uart: add support for early console
  serial: mps2-uart: add MPS2 UART driver
  dt-bindings: document the MPS2 UART bindings
  serial: sirf: Use generic uart-has-rtscts DT property
  serial: sirf: Introduce helper variable struct device_node *np
  serial: mxs-auart: Use generic uart-has-rtscts DT property
  serial: imx: Use generic uart-has-rtscts DT property
  doc: DT: Add Generic Serial Device Tree Bindings
  serial: 8250: of: Make tegra_serial_handle_break() static
  ...

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.7.  Here's the summary of
  the changes:

   - ATH79: Support for DTB passuing using the UHI boot protocol
   - ATH79: Remove support for builtin DTB.
   - ATH79: Add zboot debug serial support.
   - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
            and DPT-Module.
   - ATH79: Update devicetree clock support for AR9132 and AR9331.
   - ATH79: Cleanup the DT code.
   - ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
   - ATH79: Fix regression in PCI window initialization.
   - BCM47xx: Move SPROM driver to drivers/firmware/
   - BCM63xx: Enable partition parser in defconfig.
   - BMIPS: BMIPS5000 has I cache filing from D cache
   - BMIPS: BMIPS: Add cpu-feature-overrides.h
   - BMIPS: Add Whirlwind support
   - BMIPS: Adjust mips-hpt-frequency for BCM7435
   - BMIPS: Remove maxcpus from BCM97435SVMB DTS
   - BMIPS: Add missing 7038 L1 register cells to BCM7435
   - BMIPS: Various tweaks to initialization code.
   - BMIPS: Enable partition parser in defconfig.
   - BMIPS: Cache tweaks.
   - BMIPS: Add UART, I2C and SATA devices to DT.
   - BMIPS: Add BCM6358 and BCM63268support
   - BMIPS: Add device tree example for BCM6358.
   - BMIPS: Improve Improve BCM6328 and BCM6368 device trees
   - Lantiq: Add support for device tree file from boot loader
   - Lantiq: Allow build with no built-in DT.
   - Loongson 3: Reserve 32MB for RS780E integrated GPU.
   - Loongson 3: Fix build error after ld-version.sh modification
   - Loongson 3: Move chipset ACPI code from drivers to arch.
   - Loongson 3: Speedup irq processing.
   - Loongson 3: Add basic Loongson 3A support.
   - Loongson 3: Set cache flush handlers to nop.
   - Loongson 3: Invalidate special TLBs when needed.
   - Loongson 3: Fast TLB refill handler.
   - MT7620: Fallback strategy for invalid syscfg0.
   - Netlogic: Fix CP0_EBASE redefinition warnings
   - Octeon: Initialization fixes
   - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
   - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
   - Octeon: Correctly handle endian-swapped initramfs images.
   - Octeon: Support CN73xx, CN75xx and CN78xx.
   - Octeon: Remove dead code from cvmx-sysinfo.
   - Octeon: Extend number of supported CPUs past 32.
   - Octeon: Remove some code limiting NR_IRQS to 255.
   - Octeon: Simplify octeon_irq_ciu_gpio_set_type.
   - Octeon: Mark some functions __init in smp.c
   - Octeon: Octeon: Add Octeon III CN7xxx interface detection
   - PIC32: Add serial driver and bindings for it.
   - PIC32: Add PIC32 deadman timer driver and bindings.
   - PIC32: Add PIC32 clock timer driver and bindings.
   - Pistachio: Determine SoC revision during boot
   - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
   - Sibyte: Strip redundant comments from bcm1480_regs.h.
   - Panic immediately if panic_on_oops is set.
   - module: fix incorrect IS_ERR_VALUE macro usage.
   - module: Make consistent use of pr_*
   - Remove no longer needed work_on_cpu() call.
   - Remove CONFIG_IPV6_PRIVACY from defconfigs.
   - Fix registers of non-crashing CPUs in dumps.
   - Handle MIPSisms in new vmcore_elf32_check_arch.
   - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
   - Allow RIXI to be used on non-R2 or R6 cores.
   - Reserve nosave data for hibernation
   - Fix siginfo.h to use strict POSIX types.
   - Don't unwind user mode with EVA.
   - Fix watchpoint restoration
   - Ptrace watchpoints for R6.
   - Sync icache when it fills from dcache
   - I6400 I-cache fills from dcache.
   - Various MSA fixes.
   - Cleanup MIPS_CPU_* definitions.
   - Signal: Move generic copy_siginfo to signal.h
   - Signal: Fix uapi include in exported asm/siginfo.h
   - Timer fixes for sake of KVM.
   - XPA TLB refill fixes.
   - Treat perf counter feature
   - Update John Crispin's email address
   - Add PIC32 watchdog and bindings.
   - Handle R10000 LL/SC bug in set_pte()
   - cpufreq: Various fixes for Longson1.
   - R6: Fix R2 emulation.
   - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
   - ELF: ABI and FP fixes.
   - Allow for relocatable kernel and use that to support KASLR.
   - Fix CPC_BASE_ADDR mask
   - Plenty fo smp-cps, CM, R6 and M6250 fixes.
   - Make reset_control_ops const.
   - Fix kernel command line handling of leading whitespace.
   - Cleanups to cache handling.
   - Add brcm, bcm6345-l1-intc device tree bindings.
   - Use generic clkdev.h header
   - Remove CLK_IS_ROOT usage.
   - Misc small cleanups.
   - CM: Fix compilation error when !MIPS_CM
   - oprofile: Fix a preemption issue
   - Detect DSP ASE v3 support:1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
  MIPS: pic32mzda: fix getting timer clock rate.
  MIPS: ath79: fix regression in PCI window initialization
  MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
  MIPS: Fix VZ probe gas errors with binutils <2.24
  MIPS: perf: Fix I6400 event numbers
  MIPS: DEC: Export `ioasic_ssr_lock' to modules
  MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
  MIPS: CM: Fix compilation error when !MIPS_CM
  MIPS: Fix genvdso error on rebuild
  USB: ohci-jz4740: Remove obsolete driver
  MIPS: JZ4740: Probe OHCI platform device via DT
  MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
  MIPS: pistachio: Determine SoC revision during boot
  MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
  mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
  MIPS: Prevent "restoration" of MSA context in non-MSA kernels
  MIPS: cevt-r4k: Dynamically calculate min_delta_ns
  MIPS: malta-time: Take seconds into account
  MIPS: malta-time: Start GIC count before syncing to RTC
  MIPS: Force CPUs to lose FP context during mode switches
  ...

This adds UART and a serial console driver for Microchip PIC32 class
devices.

[ralf@linux-mips.org: Resolved merge conflict.]

Signed-off-by: Andrei Pistirica <andrei.pistirica@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Cc: linux-api@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12101/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This driver adds support to the UART controller found on ARM MPS2
platform.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Armada-3700's uart is a simple serial port, which doesn't
support. Configuring the modem control lines. The uart port has a 32
bytes Tx FIFO and a 64 bytes Rx FIFO

The uart driver implements the uart core operations. It also support the
system (early) console based on Armada-3700's serial port.

Known Issue:

The uart driver currently doesn't support clock programming, which means
the baud-rate stays with the default value configured by the bootloader
at boot time

[gregory.clement@free-electrons.com: Rewrite many part which are too long
to enumerate]

Signed-off-by: Wilson Ding <dingwei@marvell.com>
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The NWP serial driver is no longer needed, as the two users of
this hardware have migrated to a much faster generation hardware,
see https://en.wikipedia.org/wiki/QPACE2 for the replacement.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Krill <ben@codiert.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This drivers adds support to the STM32 USART controller, which is a
standard serial driver.

Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the last missing piece to get a kernel booting to a prompt in qemu-cris.

Signed-off-by: Niklas Cassel <nks@flawful.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a full sc9836-uart driver for SC9836 SoC which is based on the
spreadtrum sharkl64 platform.
This driver also support earlycon.

Originally-by: Lanqing Liu <lanqing.liu@spreadtrum.com>
Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some of FSL SoCs like T1040 has new version of UART controller which
can support 64byte FiFo.
To enable 64 byte support, following needs to be done:
-FCR[EN64] needs to be programmed to 1 to enable it.
-Also, when FCR[EN64]==1, RTL bits to be used as below
to define various Receive Trigger Levels:
        -FCR[RTL] = 00  1 byte
        -FCR[RTL] = 01  16 bytes
        -FCR[RTL] = 10  32 bytes
        -FCR[RTL] = 11  56 bytes
-tx_loadsz is set to 63-bytes instead of 64-bytes to implement
 workaround of errata A-008006 which states that tx_loadsz should
 be configured less than Maximum supported fifo bytes

Signed-off-by: Vijay Rai <vijay.rai@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>