linux-toradex.git/include/uapi/linux/usb/ch11.h, branch v5.7-rc6 Linux kernel for Apalis and Colibri modules USB: Add support to store lane count used by USB 3.2 2018-04-22T14:11:19+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2018-04-19T16:05:51+00:00 013eedb8c56e55549c45df19ca56a029cc804028 USB 3.2 specification adds Dual-lane support, doubling the maximum SuperSpeedPlus data rate from 10Gbps to 20Gbps. Dual-lane takes into use a second set of rx and tx wires/pins in the Type-C cable and connector. Add "rx_lanes" and "tx_lanes" variables to struct usb_device to store the numer of lanes in use. Number of lanes can be read using the extended port status hub request that was introduced in USB 3.1. Extended port status rx and tx lane count are zero based, maximum lanes supported by non inter-chip (SSIC) USB 3.2 is 2 (dual lane) with rx and tx lane count symmetric. SSIC devices support asymmetric lanes up to 4 lanes per direction. If extended port status is not available then default to one lane. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
USB 3.2 specification adds Dual-lane support, doubling the maximum
SuperSpeedPlus data rate from 10Gbps to 20Gbps.

Dual-lane takes into use a second set of rx and tx wires/pins in the
Type-C cable and connector.

Add "rx_lanes" and "tx_lanes" variables to struct usb_device to store
the numer of lanes in use. Number of lanes can be read using the extended
port status hub request that was introduced in USB 3.1.

Extended port status rx and tx lane count are zero based, maximum
lanes supported by non inter-chip (SSIC) USB 3.2 is 2 (dual lane) with
rx and tx lane count symmetric. SSIC devices support asymmetric lanes
up to 4 lanes per direction.

If extended port status is not available then default to one lane.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
License cleanup: add SPDX license identifier to uapi header files with no license 2017-11-02T10:19:54+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2017-11-01T14:08:43+00:00 6f52b16c5b29b89d92c0e7236f4655dc8491ad70 Many user space API headers are missing licensing information, which makes it hard for compliance tools to determine the correct license. By default are files without license information under the default license of the kernel, which is GPLV2. Marking them GPLV2 would exclude them from being included in non GPLV2 code, which is obviously not intended. The user space API headers fall under the syscall exception which is in the kernels COPYING file: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". otherwise syscall usage would not be possible. Update the files which contain no license information with an SPDX license identifier. The chosen identifier is 'GPL-2.0 WITH Linux-syscall-note' which is the officially assigned identifier for the Linux syscall exception. SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.

By default are files without license information under the default
license of the kernel, which is GPLV2.  Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

otherwise syscall usage would not be possible.

Update the files which contain no license information with an SPDX
license identifier.  The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception.  SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: hub: fix SS max number of ports 2017-05-17T09:53:02+00:00 Johan Hovold johan@kernel.org 2017-05-10T16:18:29+00:00 93491ced3c87c94b12220dbac0527e1356702179 Add define for the maximum number of ports on a SuperSpeed hub as per USB 3.1 spec Table 10-5, and use it when verifying the retrieved hub descriptor. This specifically avoids benign attempts to update the DeviceRemovable mask for non-existing ports (should we get that far). Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add define for the maximum number of ports on a SuperSpeed hub as per
USB 3.1 spec Table 10-5, and use it when verifying the retrieved hub
descriptor.

This specifically avoids benign attempts to update the DeviceRemovable
mask for non-existing ports (should we get that far).

Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: Support USB 3.1 extended port status request 2016-01-25T04:16:52+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2015-12-10T07:59:29+00:00 0cdd49a1d1a483d80170d9e592f832274e8bce1b usb 3.1 extend the hub get-port-status request by adding different request types. the new request types return 4 additional bytes called extended port status, these bytes are returned after the regular portstatus and portchange values. The extended port status contains a speed ID for the currently used sublink speed. A table of supported Speed IDs with details about the link is provided by the hub in the device descriptor BOS SuperSpeedPlus device capability Sublink Speed Attributes. Support this new request. Ask for the extended port status after port reset if hub supports USB 3.1. If link is running at SuperSpeedPlus set the device speed to USB_SPEED_SUPER_PLUS Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
usb 3.1 extend the hub get-port-status request by adding different
request types. the new request types return 4 additional bytes called
extended port status, these bytes are returned after the regular
portstatus and portchange values.

The extended port status contains a speed ID for the currently used
sublink speed. A table of supported Speed IDs with details about the link
is provided by the hub in the device descriptor BOS SuperSpeedPlus
device capability Sublink Speed Attributes.

Support this new request. Ask for the extended port status after port
reset if hub supports USB 3.1. If link is running at SuperSpeedPlus
set the device speed to USB_SPEED_SUPER_PLUS

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: move the definition of USB_MAXCHILDREN 2013-07-16T22:33:02+00:00 Alan Stern stern@rowland.harvard.edu 2013-06-27T19:27:07+00:00 36ff66db3fb5642906e46e73ca9cf92f1c5974ff The USB_MAXCHILDREN symbol is used in include/uapi/linux/usb/ch11.h, a user-mode header, even though it is defined in include/linux/usb.h, which is kernel-only. This causes compile-time errors when user programs try to #include linux/usb/ch11.h. This patch fixes the problem by moving the definition of USB_MAXCHILDREN into ch11.h. It also gets rid of unneeded parentheses. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The USB_MAXCHILDREN symbol is used in include/uapi/linux/usb/ch11.h, a
user-mode header, even though it is defined in include/linux/usb.h,
which is kernel-only.  This causes compile-time errors when user
programs try to #include linux/usb/ch11.h.

This patch fixes the problem by moving the definition of USB_MAXCHILDREN
into ch11.h.  It also gets rid of unneeded parentheses.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UAPI: (Scripted) Disintegrate include/linux/usb 2012-10-09T08:49:07+00:00 David Howells dhowells@redhat.com 2012-10-09T08:49:07+00:00 5e1ddb481776a487b15b40579a000b279ce527c9 Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com> 
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>