linux-toradex.git/include/uapi/linux/usb/ch9.h, branch v4.10-rc5

usb: ch9: make usb_endpoint_maxp() return only packet size

2016-11-03T08:38:22+00:00

Now that we have a helper to gather periodic
endpoints' multiplier bits from wMaxPacketSize and
every driver is using it, we can safely make sure
that usb_endpoint_maxp() returns only bits 10:0 of
wMaxPacketSize which is where the actual packet size
lies.

Signed-off-by: Felipe Balbi

usb: add helper to extract bits 12:11 of wMaxPacketSize

2016-10-31T09:15:33+00:00

According to USB Specification 2.0 table 9-4,
wMaxPacketSize is a bitfield. Endpoint's maxpacket
is laid out in bits 10:0. For high-speed,
high-bandwidth isochronous endpoints, bits 12:11
contain a multiplier to tell us how many
transactions we want to try per uframe.

This means that if we want an isochronous endpoint
to issue 3 transfers of 1024 bytes per uframe,
wMaxPacketSize should contain the value:

	1024 | (2 << 11)

or 5120 (0x1400). In order to make Host and
Peripheral controller drivers' life easier, we're
adding a helper which returns bits 12:11. Note that
no care is made WRT to checking endpoint type and
gadget's speed. That's left for drivers to handle.

Signed-off-by: Felipe Balbi

USB: PD: additional feature selectors

2016-04-18T19:33:15+00:00

This adds the feature selectors from Table 9-8

Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

USB: PD: define specific requests

2016-04-18T19:33:15+00:00

This takes the definitions of requests from chapter 9.3.1
of the USB Power Delivery spec.

Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

USB: add descriptors from USB Power Delivery spec

2016-04-18T19:33:15+00:00

Adding the descriptors of chapter 9.2 of the Power Delivery spec.

Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

usb: ch9: Fix SSP Device Cap wFunctionalitySupport type

2016-03-29T10:26:04+00:00

The wFunctionalitySupport field should be __le16.

Signed-off-by: John Youn 
Signed-off-by: Felipe Balbi

usb: add OTG status selector definition for HNP polling

2016-03-04T13:14:35+00:00

A host is required to use the GetStatus command, with wIndex set to the
OTG status selector(F000H) to request the Host request flag from the
peripheral.

Acked-by: Peter Chen 
Signed-off-by: Li Jun 
Signed-off-by: Felipe Balbi

usb: ch9: Add size macro for SSP dev cap descriptor

2016-03-04T13:14:22+00:00

The SuperspeedPlus Device Capability Descriptor has a variable size
depending on the number of sublink speed attributes.

This patch adds a macro to calculate that size. The macro takes one
argument, the Sublink Speed Attribute Count (SSAC) as reported by the
descriptor in bmAttributes[4:0].

See USB 3.1 9.6.2.5, Table 9-19.

Signed-off-by: John Youn 
Signed-off-by: Felipe Balbi

usb: Add USB 3.1 Precision time measurement capability descriptor support

2016-02-15T01:03:23+00:00

USB 3.1 devices that support precision time measurement have an
additional PTM cabaility descriptor as part of the full BOS descriptor

Look for this descriptor while parsing the BOS descriptor, and store it in
struct usb_hub_bos if it exists.

Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

usb: Add USB3.1 SuperSpeedPlus Isoc Endpoint Companion descriptor

2016-02-15T01:03:23+00:00

USB3.1 specifies a SuperSpeedPlus Isoc endpoint companion descriptor
which is returned as part of the devices complete configuration
descriptor.

It contains number of bytes per service interval which is needed when
reserving bus time in the schedule for transfers over 48K bytes per
service interval.

If bmAttributes bit 7 is set in the old SuperSpeed Endpoint Companion
descriptor, it will be ollowed by the new SuperSpeedPlus Isoc Endpoint
Companion descriptor.

Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman