linux-toradex.git/include/uapi/linux/v4l2-controls.h, branch v4.4.106 Linux kernel for Apalis and Colibri modules [media] v4l2: add RF gain control 2015-10-20T17:37:56+00:00 Antti Palosaari crope@iki.fi 2015-10-10T16:50:58+00:00 41018cb84a9ed440db1508d67d9dd4084d5460eb Add new RF tuner gain control named RF Gain. That is aimed for first amplifier chip right after antenna connector. There is existing LNA Gain control, which is quite same, but it is aimed for cases amplifier is integrated to tuner chip. Some designs have both, as almost all recent tuner silicons has integrated LNA/RF amplifier in any case. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> 
Add new RF tuner gain control named RF Gain. That is aimed for first
amplifier chip right after antenna connector.
There is existing LNA Gain control, which is quite same, but it is
aimed for cases amplifier is integrated to tuner chip. Some designs
have both, as almost all recent tuner silicons has integrated LNA/RF
amplifier in any case.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
[media] Driver for Toshiba TC358743 HDMI to CSI-2 bridge 2015-07-17T12:59:28+00:00 Mats Randgaard matrandg@cisco.com 2015-07-09T08:45:47+00:00 d32d98642de66048f9534a05f3641558e811bbc9 The driver is tested on our hardware and all the implemented features works as expected. Missing features: - CEC support - HDCP repeater support - IR support Signed-off-by: Mats Randgaard <matrandg@cisco.com> [hans.verkuil@cisco.com: updated copyright year to 2015] [hans.verkuil@cisco.com: update confusing confctl_mutex comment] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> 
The driver is tested on our hardware and all the implemented features
works as expected.

Missing features:
- CEC support
- HDCP repeater support
- IR support

Signed-off-by: Mats Randgaard <matrandg@cisco.com>
[hans.verkuil@cisco.com: updated copyright year to 2015]
[hans.verkuil@cisco.com: update confusing confctl_mutex comment]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
[media] adv7180: Add fast switch support 2015-02-02T13:51:38+00:00 Lars-Peter Clausen lars@metafoo.de 2015-01-23T15:52:33+00:00 08b717c2ae8b7e23e1d018dad601fdf12bde3a96 In fast switch mode the adv7180 (and similar) can lock onto a new signal faster when switching between different inputs. As a downside though it is no longer able to auto-detect the incoming format. The fast switch mode is exposed as a boolean v4l control that allows userspace applications to either enable or disable fast switch mode. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Federico Vaga <federico.vaga@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> 
In fast switch mode the adv7180 (and similar) can lock onto a new signal
faster when switching between different inputs. As a downside though it is
no longer able to auto-detect the incoming format.

The fast switch mode is exposed as a boolean v4l control that allows
userspace applications to either enable or disable fast switch mode.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Federico Vaga <federico.vaga@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
[media] v4l: Add camera pan/tilt speed controls 2014-09-21T23:23:39+00:00 Vincent Palatin vpalatin@chromium.org 2014-09-03T19:38:39+00:00 e3d6eb1c16ef174a8fbbdd40770f5cbace0710e4 The V4L2_CID_PAN_SPEED and V4L2_CID_TILT_SPEED controls allow to move the camera by setting its rotation speed around its axis. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-by: Pawel Osciak <posciak@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> 
The V4L2_CID_PAN_SPEED and V4L2_CID_TILT_SPEED controls allow to move the
camera by setting its rotation speed around its axis.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
[media] v4l: Add test pattern colour component controls 2014-08-21T20:25:11+00:00 Sakari Ailus sakari.ailus@linux.intel.com 2014-05-28T12:38:21+00:00 0fc87864879c46afe145e20ec09c9dba2328e3be In many cases the test pattern has selectable values for each colour component. Implement controls for raw bayer components. Additional controls should be defined for colour components that are not covered by these controls. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 
In many cases the test pattern has selectable values for each colour
component. Implement controls for raw bayer components. Additional controls
should be defined for colour components that are not covered by these
controls.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] v4l2-ctrls: add RX RDS controls 2014-07-25T22:27:51+00:00 Hans Verkuil hans.verkuil@cisco.com 2014-07-21T13:45:40+00:00 9570a14847a9d334a0baf5a5921da2dbc6b9f6d2 The radio-miropcm20 driver has firmware that decodes the RDS signals. So in that case the RDS data becomes available in the form of controls. Add support for these controls to the control framework, allowing the miro driver to use them. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 
The radio-miropcm20 driver has firmware that decodes the RDS signals. So in that
case the RDS data becomes available in the form of controls.

Add support for these controls to the control framework, allowing the miro driver
to use them.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] v4l2-ctrls: add new RDS TX controls 2014-07-25T22:26:14+00:00 Hans Verkuil hans.verkuil@cisco.com 2014-07-21T13:45:37+00:00 811c508104d092683ea5fe86cdcfd23dded22934 The si4713 supports several RDS features not yet implemented in the driver. This patch adds the missing RDS functionality to the list of RDS controls. The ALT_FREQS control is a compound control containing an array of up to 25 (the maximum according to the RDS standard) frequencies. To support that the V4L2_CTRL_TYPE_U32 was added. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 
The si4713 supports several RDS features not yet implemented in the driver.

This patch adds the missing RDS functionality to the list of RDS controls.

The ALT_FREQS control is a compound control containing an array of up
to 25 (the maximum according to the RDS standard) frequencies. To support
that the V4L2_CTRL_TYPE_U32 was added.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] v4l2-ctrls/v4l2-controls.h: add MD controls 2014-07-17T14:57:27+00:00 Hans Verkuil hans.verkuil@cisco.com 2014-03-28T16:00:08+00:00 a77b4fc0bc328b0989f83220aba1c268e087107f Add the 'Detect' control class and the new motion detection controls. Those controls will be used by the solo6x10 and go7007 drivers. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 
Add the 'Detect' control class and the new motion detection controls.
Those controls will be used by the solo6x10 and go7007 drivers.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] v4l: add control for RF tuner PLL lock flag 2014-03-13T13:26:49+00:00 Antti Palosaari crope@iki.fi 2014-02-07T05:46:16+00:00 9aa4357e9b10b92acb85e30834f8eb4aa7b94554 Add volatile boolean control to indicate if tuner frequency synthesizer is locked to requested frequency. That means tuner is able to receive given frequency. Control is named as "PLL lock", since frequency synthesizers are based of phase-locked-loop. Maybe more general name could be wise still? Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 
Add volatile boolean control to indicate if tuner frequency synthesizer
is locked to requested frequency. That means tuner is able to receive
given frequency. Control is named as "PLL lock", since frequency
synthesizers are based of phase-locked-loop. Maybe more general name
could be wise still?

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] v4l: reorganize RF tuner control ID numbers 2014-03-13T13:26:44+00:00 Antti Palosaari crope@iki.fi 2014-02-05T01:13:44+00:00 835b87c7adecef13bbc2a32c8e8437201144e9c4 It appears that controls are ordered by ID number when enumerating. That could lead illogical UI as controls are usually enumerated and drawn by the application at runtime. Change order of controls by reorganizing assigned IDs now as we can. It is not reasonable possible after the API is released. Also, leave some spare space between IDs too for possible future extensions. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 
It appears that controls are ordered by ID number when enumerating.
That could lead illogical UI as controls are usually enumerated and
drawn by the application at runtime.

Change order of controls by reorganizing assigned IDs now as we can.
It is not reasonable possible after the API is released. Also, leave
some spare space between IDs too for possible future extensions.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>