linux-toradex.git/include/uapi/linux/v4l2-controls.h, branch v4.9.16

[media] v4l: add V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME

2016-02-19T10:10:35+00:00

Some drivers also need a control like
V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE to force an encoder
key frame. Add a general V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME
so the new drivers and applications can use it.

Signed-off-by: Wu-Cheng Li 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

[media] v4l2-ctrls: add V4L2_CID_DV_RX/TX_IT_CONTENT_TYPE controls

2016-02-10T11:30:56+00:00

HDMI and DisplayPort both support IT Content Type information that
tells the receiver what type of material the video is, graphics such
as from a PC desktop, Photo, Cinema or Game (low-latency).

This patch adds controls for receivers and transmitters to get/set
this information.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

[media] include/media: move driver interface headers to a separate dir

2015-11-17T08:57:29+00:00

Let's not mix headers used by the core with those headers that
are needed by some driver-specific interface header.

The headers used on drivers were manually moved using:
    mkdir include/media/drv-intf/
    git mv include/media/cx2341x.h include/media/cx25840.h \
	include/media/exynos-fimc.h include/media/msp3400.h \
	include/media/s3c_camif.h include/media/saa7146.h \
	include/media/saa7146_vv.h  include/media/sh_mobile_ceu.h \
	include/media/sh_mobile_csi2.h include/media/sh_vou.h \
	include/media/si476x.h include/media/soc_mediabus.h \
	include/media/tea575x.h include/media/drv-intf/

And the references for those headers were corrected using:

    MAIN_DIR="media/"
    PREV_DIR="media/"
    DIRS="drv-intf/"

    echo "Checking affected files" >&2
    for i in $DIRS; do
	for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do
		 n=`basename $j`
		git grep -l $n
	done
    done|sort|uniq >files && (
	echo "Handling files..." >&2;
	echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\";
	(
		cd include/$MAIN_DIR;
		for j in $DIRS; do
			for i in $(ls $j); do
				echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\";
			done;
		done;
		echo "cat > a && mv a \$i; done";
	);
	echo "Handling documentation..." >&2;
	echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\";
	(
		cd include/$MAIN_DIR;
		for j in $DIRS; do
			for i in $(ls $j); do
				echo "  perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\";
			done;
		done;
		echo "cat > a && mv a \$i; done"
	);
    ) >script && . ./script

Signed-off-by: Mauro Carvalho Chehab 
Acked-by: Arnd Bergmann

[media] v4l2: add RF gain control

2015-10-20T17:37:56+00:00

Add new RF tuner gain control named RF Gain. That is aimed for first
amplifier chip right after antenna connector.
There is existing LNA Gain control, which is quite same, but it is
aimed for cases amplifier is integrated to tuner chip. Some designs
have both, as almost all recent tuner silicons has integrated LNA/RF
amplifier in any case.

Signed-off-by: Antti Palosaari 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

[media] Driver for Toshiba TC358743 HDMI to CSI-2 bridge

2015-07-17T12:59:28+00:00

The driver is tested on our hardware and all the implemented features
works as expected.

Missing features:
- CEC support
- HDCP repeater support
- IR support

Signed-off-by: Mats Randgaard 
[hans.verkuil@cisco.com: updated copyright year to 2015]
[hans.verkuil@cisco.com: update confusing confctl_mutex comment]
Signed-off-by: Hans Verkuil 

Signed-off-by: Mauro Carvalho Chehab

[media] adv7180: Add fast switch support

2015-02-02T13:51:38+00:00

In fast switch mode the adv7180 (and similar) can lock onto a new signal
faster when switching between different inputs. As a downside though it is
no longer able to auto-detect the incoming format.

The fast switch mode is exposed as a boolean v4l control that allows
userspace applications to either enable or disable fast switch mode.

Signed-off-by: Lars-Peter Clausen 
Acked-by: Federico Vaga 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

[media] v4l: Add camera pan/tilt speed controls

2014-09-21T23:23:39+00:00

The V4L2_CID_PAN_SPEED and V4L2_CID_TILT_SPEED controls allow to move the
camera by setting its rotation speed around its axis.

Signed-off-by: Vincent Palatin 
Reviewed-by: Pawel Osciak 
Signed-off-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab

[media] v4l: Add test pattern colour component controls

2014-08-21T20:25:11+00:00

In many cases the test pattern has selectable values for each colour
component. Implement controls for raw bayer components. Additional controls
should be defined for colour components that are not covered by these
controls.

Signed-off-by: Sakari Ailus 
Acked-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

[media] v4l2-ctrls: add RX RDS controls

2014-07-25T22:27:51+00:00

The radio-miropcm20 driver has firmware that decodes the RDS signals. So in that
case the RDS data becomes available in the form of controls.

Add support for these controls to the control framework, allowing the miro driver
to use them.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

[media] v4l2-ctrls: add new RDS TX controls

2014-07-25T22:26:14+00:00

The si4713 supports several RDS features not yet implemented in the driver.

This patch adds the missing RDS functionality to the list of RDS controls.

The ALT_FREQS control is a compound control containing an array of up
to 25 (the maximum according to the RDS standard) frequencies. To support
that the V4L2_CTRL_TYPE_U32 was added.

Signed-off-by: Hans Verkuil 
Cc: Eduardo Valentin 
Signed-off-by: Mauro Carvalho Chehab